Ahmed Hasan Alwathaf

Prof. Dr. Ahmed Hasan Alwathaf

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Ahmed Hasan AlwathafAhmed Hasan Alwathaf
Ahmed Hasan Alwathaf
MAMu'tasime Abdel-jaber
Mu'tasime Abdel-jaber
YHYasser M. Hunaiti
Yasser M. Hunaiti
Using recycled asphalt pavement (RAP) as a natural aggregate (NA) replacement supports environmental preservation but requires performance evaluation. This study investigated the mechanical properties of concrete containing RAP and the potential of silica fume (SF) and superplasticizer (SP) to enhance these properties. Thirty-five concrete mixtures were prepared with a 0%, 25%, 50%, 75%, or 100% replacement of natural coarse aggregate by crushed coarse RAP. SF (0–21%) and SP (0–2.1% per 100 kg of cement) were added separately as admixtures. Tests on compressive, splitting, and flexural strength showed that RAP generally reduced compressive and splitting tensile strength but increased flexural strength at low RAP content. SF and SP partially restored strength losses, with higher RAP content benefiting more from these admixtures. Optimal compressive strength gains ranged from 8% to 58%, with splitting and flexural tensile strength improvements of 40% and 28%, respectively. The ideal SF and SP contents were 5–7% and 0.8–1.5%, respectively. These findings demonstrate that 100% RAP concrete, combined with appropriate admixtures, can meet performance requirements, offering a sustainable solution for structural applications and promoting resource conservation.

1 December 2011 in Advances in Structural Engineering
Verified
Journal Article
Closed access
NSNor Azizi Safiee
Nor Azizi Safiee
MJMohd Saleh Jaafar
Mohd Saleh Jaafar
Ahmed Hasan AlwathafAhmed Hasan Alwathaf
Ahmed Hasan Alwathaf
JNJamaloddin Noorzaei
Jamaloddin Noorzaei
MAMohd. Razali Abdulkadir
Mohd. Razali Abdulkadir
Experimental and numerical investigation of interlocking mortarless wall panels with 1.0 m height, 1.2 m width and 150 mm thickness are conducted. Behaviour of both hollow and partially grouted masonry wall panels is studied. The panels were tested under constant pre-compressive vertical load and out-of-plane lateral load. Lateral load carrying capacity, deflection at mid height, dry joint opening between block layers and mode of failure are investigated. Strain characteristics throughout the loading process are also monitored. A finite element analysis is presented for the system and a good agreement between the experimental and modelling results is achieved. Parametric study using the finite element model is also presented and the effect of different parameters; amount of pre-compressive load and slenderness ratio is studied. The study reveals that pre-compressive vertical load and reinforcement significantly affect the structural behaviour of mortarless walls under out-of-plane loading. Useful expressions for the capacity are obtained from the analysis.

1 June 2008 in Engineering Structures
Verified
Journal Article
Closed access
WTWaleed A. Thanoon
Waleed A. Thanoon
Ahmed Hasan AlwathafAhmed Hasan Alwathaf
Ahmed Hasan Alwathaf
JNJamaloddin Noorzaei
Jamaloddin Noorzaei
MJMohd. Saleh Jaafar
Mohd. Saleh Jaafar
MAMohd. Razali Abdulkadir
Mohd. Razali Abdulkadir

1 March 2008 in Computers & Structures
Verified
Journal Article
Closed access
WTWaleed A.M. Thanoon
Waleed A.M. Thanoon
Ahmed Hasan AlwathafAhmed Hasan Alwathaf
Ahmed Hasan Alwathaf
JNJamaloddin Noorzaei
Jamaloddin Noorzaei
MJMohd. Saleh Jaafar
Mohd. Saleh Jaafar
MAMohd. Razali Abdulkadir
Mohd. Razali Abdulkadir

1 August 2006 in Proceedings of the Institution of Civil Engineers - Construction Materials
Verified
Journal Article
Closed access
MJM. S. Jaafar
M. S. Jaafar
Ahmed Hasan AlwathafAhmed Hasan Alwathaf
Ahmed Hasan Alwathaf
WTW. A. Thanoon
W. A. Thanoon
JNJ. Noorzaei
J. Noorzaei
MAM. R. Abdulkadir
M. R. Abdulkadir
Various types of interlocking mortarless (dry-stacked) block masonry system have been developed worldwide. However, the characteristics of dry joints under compressive load, and their effect on the overall behaviour of the interlocking mortarless system, are still not well understood. This paper presents an experimental investigation into the dry-joint contact behaviour of masonry and the behaviour of interlocking mortarless hollow blocks for grouted and ungrouted prisms under compression. Two experimental test set-ups are proposed to evaluate the contact behaviour of dry joints, considering the geometric imperfections in the contacting faces. The results show that the contact behaviour of a dry joint is highly affected by geometric imperfections in the block bed. Different patterns of deformation are distinguished in mortarless hollow (ungrouted) and grouted prisms. Dry joints predominantly affected the hollow prism deformation until the compressive load reaches 0·57 of the maximum load. However, this behaviour is not common in grouted prisms, because noticeable deformation commences after 0$38 of the maximum load. Furthermore, the variations of strength and deformation in grouted specimens are diminished compared with those in ungrouted specimens.

6 July 2023 in Structures
Verified
Journal Article
Closed access
IAIbrahim M.H. Alshaikh
Ibrahim M.H. Alshaikh
AAAref A. Abadel
Aref A. Abadel
RTRabin Tuladhar
Rabin Tuladhar
Ahmed Hasan AlwathafAhmed Hasan Alwathaf
Ahmed Hasan Alwathaf
Moncef L. NehdiMoncef L. Nehdi
Moncef L. Nehdi