The slice repeater jamming (SRJ) is coherent with the transmitted waveform and can produce many false targets after pulse compression, making it difficult for radars to detect real targets. To suppress the SRJ, an SRJ recognition and suppression method based on coded waveform is proposed in this paper. First, the design principle of the coded waveform is introduced, and the SRJ characteristics and target characteristics of the coded waveform are revealed by theoretical derivation. By adjusting the coded waveform parameters, the target peaks in the range profile may disappear, so that the range profile of the coded waveform is dominated by SRJ. In addition, when subjected to the same SRJ, the positions of false targets in the coded waveform range profile are the same as those in the linear frequency modulation (LFM) waveform range profile, and this property can be used to recognize the false targets in the LFM range profile. Then, based on the relationship between the false targets in the range profiles of the two waveforms, the false targets in the LFM waveform range profile are reconstructed and suppressed. Finally, simulations are conducted to demonstrate that the proposed method is effective against different kinds of SRJ. Compared with existing methods, the proposed method shows better jamming suppression ability in different signal-to-noise ratio (SNR) and signal-to-jamming ratio (SJR) scenarios.
The application of a pulse radar in anechoic chamber imaging is a new way to obtain the electromagnetic characteristics of targets. However, the limited size of an anechoic chamber causes the coupling between the transmitted signal and echo so the target image cannot be accurately achieved. To solve this problem, an imaging method using a pulse radar in an anechoic chamber based on an amplitude modulation design is proposed in this paper. Firstly, amplitude modulation is performed to solve the coupling of the transmitted signal and echo. In order to cancel the false targets in the target image after the amplitude modulation, different amplitude modulation sequences are designed. Secondly, echo processing based on the designed amplitude modulation is discussed to obtain the target image. Simulations and experiments are conducted and the results show that the proposed amplitude design and echo processing method can accurately obtain the target image in an anechoic chamber.
1 January 2026 in IEEE Transactions on Aerospace and Electronic Systems