The creation of a Marine Internet of Things platform, including the Underwater Internet of Things, is needed to ensure the interaction and digital navigation of heterogeneous marine robotic agents. It is necessary to combine the following robotic agents: autonomous underwater vehicles, remotely operated vehicles, active and passive marine sensors, buoys, underwater sonar stations, coastal communication posts, and other elements of the platform. To ensure the interaction of all these elements, it is necessary to use a common communication system within the platform, as well as a common navigation and control system to solve complex problems of the navigation and control of the movement of robotic agents in order to implement a joint mission to collect and transmit data, including video information in real time. The architecture of the Marine Internet of Things platform must first be defined in order to use a unified approach to data exchange. This article provides an overview of approaches to determining the architectures of network underwater and marine communication systems based on the concept of the Internet of Things. This paper provides a comprehensive study of MIoT applications, challenges, and architectures. The main contributions of this paper are summarized as follows: we introduce potential MIoT applications; we point out the challenges of MIoT (i.e., the differences between MIoT and IoT); and we analyze the MIoT system architecture.
With the development of underwater technology, it is important to develop a wide range of autonomous and remotely operated underwater vehicles for various tasks. Depending on the problem that needs to be solved, vehicles will have different designs and dimensions, while the issues surrounding reduced costs and increasing the functionality of vehicles are relevant. This article discusses the development of inspection class experimental remotely operated vehicles (ROVs) for performing coastal underwater inspection operations, with a smaller number of thrusters, but having the same functional capabilities in terms of controllability (as vehicles with traditionally-shaped layouts). The proposed design provides controllability of the vehicle in six degrees of freedom, using six thrusters. In classical design vehicles, such controllability is usually achieved using eight thrusters. The proposed design of the ROV is described; the mathematical model, the results of modeling, and experimental tests of the developed ROVs are shown.
The use of bivalve mollusks as bioindicators in automated monitoring systems can provide real-time detection of emergency situations associated with the pollution of aquatic environments. The behavioral reactions of Unio pictorum (Linnaeus, 1758) were employed in the development of a comprehensive automated monitoring system for aquatic environments by the authors. The study used experimental data obtained by an automated system from the Chernaya River in the Sevastopol region of the Crimean Peninsula. Four traditional unsupervised machine learning techniques were implemented to detect emergency signals in the activity of bivalves: elliptic envelope, isolation forest (iForest), one-class support vector machine (SVM), and local outlier factor (LOF). The results showed that the use of the elliptic envelope, iForest, and LOF methods with proper hyperparameter tuning can detect anomalies in mollusk activity data without false alarms, with an F1 score of 1. A comparison of anomaly detection times revealed that the iForest method is the most efficient. These findings demonstrate the potential of using bivalve mollusks as bioindicators in automated monitoring systems for the early detection of pollution in aquatic environments.
The paper proposes a new design of an artificial neural network for solving the inverse kinematics problem of the anthropomorphic manipulator of robot SAR-401. To build a neural network (NN), two sets were used as input data: generalized coordinates of the manipulator and elements of a homogeneous transformation matrix obtained by solving a direct kinematics problem based on the Denavi–Hartenberg notation. According to the simulation results, the NN based on the homogeneous transformation matrix showed the best accuracy. However, the accuracy was still insufficient. To increase the accuracy, a new NN design was proposed. It consists of adding a so-called “correctional” NN, the input of which is fed the same elements of the homogeneous transformation matrix and additionally the output of the first NN. The proposed design based on the correctional NN allowed the accuracy to increase two times. The application of the developed NN approach was carried out on a computer model of the manipulator in MATLAB, on the SAR-401 robot simulator, as well as on the robot itself.
4 February 2020 in International Journal of Control, Automation, and Systems
The paper considers the problem of cooperative control synthesis for a complex of underwater vehicle–manipulator systems (UVMS) to perform the work of moving a cargo along a given trajectory. Here, we used the approach based on the representation of nonlinear dynamics models in the form of state space with state-dependent coefficients (SDC-form). That allowed us to apply methods of suboptimal control with feedback based on the state-dependent differential Riccati equation (SDDRE) solution at a finite time interval, providing the change in control intensity with the transient effect of the system matrices in SDC form. The paper reveals two approaches to system implementation: a general controller for the whole system and a set of independent subcontrollers for UVMSs. The results of both approaches are similar; however, for the systems with a small number of manipulators, the common structure is recommended, and for the systems with a large number of manipulators, the approach with independent subcontrollers may be more acceptable. The proposed method of cooperative control was tested on the task of cooperative control for two UVMSs with six-link manipulators Orion 7R. The simulation results are presented in the article and show the effectiveness of the proposed method.