Alma Tamunonengiofori Banigo

Dr. Alma Tamunonengiofori Banigo

orcid
Open to Work

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2018 in Journal of Natural Fibers
Verified
Journal Article
Closed access
TATaofik Oladimeji Azeez
Taofik Oladimeji Azeez
DODominic Okechukwu Onukwuli
Dominic Okechukwu Onukwuli
JNJoseph Tagbo Nwabanne
Joseph Tagbo Nwabanne
Alma Tamunonengiofori BanigoAlma Tamunonengiofori Banigo
Alma Tamunonengiofori Banigo
Mechanical (flexural, hardness, and impact) properties and interfacial adhesion of acetic anhydride (AC) and ethylene diamine tetraacetic acid (EDTA) treated Cissus populnea fiber-unsaturated polyester (UPR) composites was investigated because of poor durability of the natural fiber-UPR composite applications. UPR composites were prepared with untreated and optimally treated fiber using hand-lay-up technique. Optimization of mechanical properties and interfacial adhesion between the fiber and UPR were determined using response surface methodology and fiber pull-out method, respectively. AC and EDTA treated fibers improved the flexural and hardness properties and interfacial adhesion at reduced impact strength. This is corroborated with morphology of the composites.

28 March 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Alma Tamunonengiofori BanigoAlma Tamunonengiofori Banigo
Alma Tamunonengiofori Banigo
LNLaura Nauta
Laura Nauta
BZBram Zoetebier
Bram Zoetebier
MKMarcel Karperien
Marcel Karperien
Three-dimensional bioprinting technology has emerged as a rapidly advancing multidisciplinary field with significant potential for tissue engineering applications. This technology enables the formation of complex tissues and organs by utilizing hydrogels, with or without cells, as scaffolds or structural supports. Among various bioprinting methods, advanced bioprinting using coaxial and triaxial nozzles stands out as a promising technique. Coaxial bioprinting technique simultaneously deposits two material streams through a coaxial nozzle, enabling controlled formation of an outer shell and inner core construct. In contrast, triaxial bioprinting utilizes three material streams namely the outer shell, inner shell and inner core to fabricate more complex constructs. Despite the growing interest in 3D bioprinting, the development of suitable cell-laden bioinks for creating complex tissues remains unclear. To address this gap, a systematic review was conducted using the preferred reporting items for systematic reviews and meta-analyses (PRISMA) flowchart, collecting 1621 papers from various databases, including Web of Science, PUBMED, SCOPUS, and Springer Link. After careful selection, 85 research articles focusing on coaxial and triaxial bioprinting were included in the review. Specifically, 77 research articles concentrated on coaxial bioprinting and 11 focused on triaxial bioprinting, with 3 covering both techniques. The search, conducted between 1 April and 30 September 2023, had no restrictions on publication date, and no meta-analyses were carried out due to the heterogeneity of studies. The primary objective of this review is to assess and identify the most commonly occurring cell-laden bioinks critical for successful advancements in bioprinting technologies. Specifically, the review focuses on delineating the commonly explored bioinks utilized in coaxial and triaxial bioprinting approaches. It focuses on evaluating the inherent merits of these bioinks, systematically comparing them while emphasizing their classifications, essential attributes, properties, and potential limitations within the domain of tissue engineering. Additionally, the review considers the applications of these bioinks, offering comprehensive insights into their efficacy and utility in the field of bioprinting technology. Overall, this review provides a comprehensive overview of some conditions of the relevant hydrogel bioinks used for coaxial and triaxial bioprinting of tissue constructs. Future research directions aimed at advancing the field are also briefly discussed.

3 December 2024 in Polymers
Verified
Journal Article
Open access
PDF file
Alma Tamunonengiofori BanigoAlma Tamunonengiofori Banigo
Alma Tamunonengiofori Banigo
IKIrene B.M. Konings
Irene B.M. Konings
LNLaura Nauta
Laura Nauta
BZBram Zoetebier
Bram Zoetebier
MKMarcel Karperien
Marcel Karperien
Injectable hydrogels are promising materials for cartilage regeneration in tissue engineering due to their tunable crosslinking rates, mechanical properties, and biodegradation profiles. This study investigates the chondrogenic potential of hyaluronic acid (HA) hydrogels crosslinked via tyramine (TA) moieties, with and without gelatin modified with TA (Gel-TA). Incorporating Gel-TA improved cell viability, spreading, and cartilage matrix deposition, particularly in medium and high molecular weight (MMW and HMW) HA-TA/Gel-TA hydrogels. Although the hydrogels’ molecular weight did not significantly alter stiffness, MMW and HMW HA-TA/Gel-TA formulations exhibited enhanced functional properties such as slower degradation and superior cartilage matrix deposition. These attributes, coupled with Gel-TA’s effects, underscore the importance of both molecular weight and biofunctional components in hydrogel design for cartilage regeneration. While low molecular weight (LMW) HA-TA hydrogels offered excellent injectability and supported high cell viability, they degraded rapidly and exhibited reduced cartilage matrix formation. Gel-TA enhanced cell adhesion and spreading by providing integrin-binding sites and promoted collagen type II deposition, crucial for cartilage regeneration. Moreover, the increased stiffness of MMW and HMW HA-TA/Gel-TA hydrogels facilitated extracellular matrix production. These findings show the potential of Gel-TA-modified HA-TA hydrogels for cartilage tissue engineering, with the opportunity for further optimization through the incorporation of bioactive components.

30 August 2024 in Polymers
Verified
Journal Article
Open access
PDF file
Alma Tamunonengiofori BanigoAlma Tamunonengiofori Banigo
Alma Tamunonengiofori Banigo
LNLaura Nauta
Laura Nauta
BZBram Zoetebier
Bram Zoetebier
MKMarcel Karperien
Marcel Karperien
Three-dimensional (3D) bioprinting has emerged as an important technique for fabricating tissue constructs with precise structural and compositional control. However, developing suitable bioinks with biocompatible crosslinking mechanisms remains a significant challenge. This study investigates extrusion-based bioprinting (EBB) using uniaxial or coaxial nozzles with enzymatic crosslinking (EC) to produce 3D tissue constructs in vitro. Initially, low-molecular-weight dextran-tyramine and hyaluronic acid-tyramine (LMW Dex-TA/HA-TA) bioink prepolymers were evaluated. Enzymatically pre-crosslinking these prepolymers, achieved by the addition of horseradish peroxidase and hydrogen peroxide, produced viscous polymer solutions. However, this approach resulted in inconsistent bioprinting outcomes (uniaxial) due to inhomogeneous crosslinking, leading to irreproducible properties and suboptimal shear recovery behavior of the hydrogel inks. To address these challenges, we explored a one-step coaxial bioprinting system consisting of enzymatically crosslinkable high-molecular-weight hyaluronic acid-tyramine conjugates (HMW HA-TA) mixed with horseradish peroxidase (HRP) in the inner core and a mixture of Pluronic F127 and hydrogen peroxide in the outer shell. This configuration resulted in nearly instantaneous gelation by diffusion of the hydrogen peroxide into the core. Stable hydrogel fibers with desirable properties, including appropriate swelling ratios and controlled degradation rates, were obtained. The optimized bioink and printing parameters included 1.3% w/v HMW HA-TA and 5.5 U/mL HRP (bioink, inner core), and 27.5% w/v Pluronic F127 and 0.1% H2O2 (sacrificial ink, outer shell). Additionally, optimal pressures for the inner core and outer shell were 45 and 80 kPa, combined with a printing speed of 300 mm/min and a bed temperature of 30 °C. The extruded HMW HA-TA core filaments, containing bovine primary chondrocytes (BPCs) or 3T3 fibroblasts (3T3 Fs), exhibited good cell viabilities and were successfully cultured for up to seven days. This study serves as a proof-of-concept for the one-step generation of core filaments using a rapidly gelling bioink with an enzymatic crosslinking mechanism, and a coaxial bioprinter nozzle system. The results demonstrate significant potential for developing designed, printed, and organized 3D tissue fiber constructs.

30 August 2024 in Gels
Verified
Journal Article
Open access
PDF file
LZLin Zhong
Lin Zhong
Alma Tamunonengiofori BanigoAlma Tamunonengiofori Banigo
Alma Tamunonengiofori Banigo
BZBram Zoetebier
Bram Zoetebier
MKMarcel Karperien
Marcel Karperien
Hydrogels are widely used in tissue engineering due to their ability to form three-dimensional (3D) structures that support cellular functions and mimic the extracellular matrix (ECM). Despite their advantages, dextran-based hydrogels lack intrinsic biological activity, limiting their use in this field. Here, we present a strategy for developing bioactive hydrogels through sequential thiol–maleimide bio-functionalization and enzyme-catalyzed crosslinking. The hydrogel network is formed through the reaction of tyramine moieties in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H2O2), allowing for tunable gelation time and stiffness by adjusting H2O2 concentrations. Maleimide groups on the hydrogel backbone enable the coupling of thiol-containing bioactive molecules, such as arginylglycylaspartic acid (RGD) peptides, to enhance biological activity. We examined the effects of hydrogel stiffness and RGD concentration on human mesenchymal stem cells (hMSCs) during differentiation and found that hMSCs encapsulated within these hydrogels exhibited over 88% cell viability on day 1 across all conditions, with a slight reduction to 60–81% by day 14. Furthermore, the hydrogels facilitated adipogenic differentiation, as evidenced by positive Oil Red O staining. These findings demonstrate that DexTA–Mal hydrogels create a biocompatible environment that is conducive to cell viability and differentiation, offering a versatile platform for future tissue engineering applications.