Amir GHASEMIAN Ghasemian Sahebi

Dr. Amir GHASEMIAN Ghasemian Sahebi

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SMSobhan Mohamadian
Sobhan Mohamadian
HPHamidreza Pairo
Hamidreza Pairo
ASAmir GHASEMIAN Ghasemian Sahebi
Amir GHASEMIAN Ghasemian Sahebi
Suppressing the negative effects of grid voltage harmonics on the estimated frequency of a phase-locked loop (PLL) is a challenge in literature. This article proposes an easy-to-implement quadrature signal generator (QSG) to attenuate the oscillations on the estimated frequency in single-phase grid-connected inverters, which use second-order generalized integrator (SOGI)-PLL. It is shown that SOGI exerts a stronger filtering effect in generating the quadrature signal than the in-phase signal. Against this background, in this work, a modified integrator is introduced into the path of the in-quadrature signal to generate another in-phase component with much lower harmonic content. The proposed method imposes only a small computational burden on the existing SOGI-PLL compared to the previously presented methods that address the input voltage harmonic problem. Moreover, this method can work properly within the allowable range of grid voltage frequency deviations. The proposed integrator benefits from an error-decaying mechanism to overcome dc drift in pure integrators. The integrator has been designed based on theoretical equations. The validity of the proposed QSG and theoretical equations is evaluated using simulations and experimental studies. A fixed-point representation of the proposed QSG is also provided for implementation on low-cost microcontrollers.

19 June 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ASAmir GHASEMIAN Ghasemian Sahebi
Amir GHASEMIAN Ghasemian Sahebi
ATAsghar Taheri
Asghar Taheri
Time-optimal (TO) control of dc-dc converters, using switching surface controllers, has been investigated extensively in the literature. Studies show that such controllers are of a minimum-switching and bang-bang nature and have the fastest possible response time. However, this method has three drawbacks: First, the inductors' maximum current goes beyond practical limits. Second, due to a marginal status in existence condition of the switching surface, stability of the controller is sensitive to parameter changes. Third, its nonlinear switching surface needs high computational power and is hard to implement. To overcome these problems, the switched affine model of boost converters is used in this paper to study the time response and equilibrium states. Then, the current-constrained TO state trajectory is studied, and its optimality is discussed. A constrained near-optimal (CNO) controller is proposed with a piecewise linear switching surface to guarantee the robustness of stability and the simplicity of implementation. A general condition for the existence of sliding mode and a novel method to check finite time reaching are proposed for arbitrary switching surfaces. The Lyapunov stability for the CNO controller is also discussed. The proposed method is validated on an experimental setup with a boost converter prototype and a TMS320F2812 processor board.

29 October 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Open access
ASAmir GHASEMIAN Ghasemian Sahebi
Amir GHASEMIAN Ghasemian Sahebi
SMSobhan Mohamadian
Sobhan Mohamadian
Concettina BuccellaConcettina Buccella
Concettina Buccella
CCCARLO CECATI
CARLO CECATI
This article develops a gradient-based search algorithm for selective harmonic elimination (SHE) to address the problems of high-computational cost, low-convergence speed, modulation index error, and slow-dynamic response often associated with SHE algorithms. First, the dimension of the search space is reduced by deriving intuitive equations to increase the search speed. Second, the desired modulation index is achieved by applying the proposed constraints. Third, gradient equations are modified to move and hold points in the reduced search space. Extensive comparative simulation studies show that, compared to conventional SHE methods, the proposed algorithm is highly efficient in producing smooth switching angle curves with minimal fluctuations over the entire modulation index range. The proposed method minimizes execution time and modulation index error, even with unbalanced dc input voltages. These superior characteristics are also experimentally verified on cascaded H-bridge inverters with different number of stages up to 25.

1 January 2019 in Complexity
Verified
Journal Article
Open access
PDF file
ATAsghar Taheri
Asghar Taheri
ASAmir GHASEMIAN Ghasemian Sahebi
Amir GHASEMIAN Ghasemian Sahebi
HRHai-Peng Ren
Hai-Peng Ren
It is well known in the literature studies that the theoretical time‐optimal control of boost converters can be achieved using switching surfaces based on the converter’s natural state trajectories. However, this method has two important drawbacks: First, the transient current peak of the time‐optimal controller is far beyond the current limitations of related circuit elements in many practical cases. Second, switching based on the converter’s natural trajectories has high computational complexity and high dependence on circuit parameters. In this paper, based on the hybrid dynamical model of the converter and geometrical representation of its corresponding vector fields, a proximate constrained time‐optimal sliding mode controller is proposed. The proposed method has a fast response that is near that of a time‐optimal controller, with less computational complexity and sensitivity to parameter changes. The proposed method and its relevant theoretical framework are validated on an experimental setup with a boost converter prototype and an eZdsp TMS320F2812 processor board.

6 September 2025 in Electronics
Verified
Journal Article
Open access
PDF file
MDMorteza Dezhbord
Morteza Dezhbord
FRFazal Ur Rehman
Fazal Ur Rehman
ASAmir GHASEMIAN Ghasemian Sahebi
Amir GHASEMIAN Ghasemian Sahebi
CCCARLO CECATI
CARLO CECATI
Multilevel active bridge converters are potential candidates for many modern high-power DC applications due to their ability to integrate multiple sources while minimizing weight and volume. Therefore, this paper deals with an analytical, simulation-based, and experimentally verified investigation of their circulating current behavior, power factor performance, and power loss characteristics. A high-frequency link analysis framework is developed to characterize voltage, current, and power transfer waveforms, providing insight into reactive power generation and its impact on overall efficiency. By introducing a modulation-based control approach, the proposed converters significantly reduce circulating currents and enhance the power factor, particularly under varying phase-shift conditions. Compared to quadruple active bridge topologies, the discussed multilevel architectures offer reduced transformer complexity and improved power quality, making them suitable for demanding applications such as electric vehicles and aerospace systems.

31 January 2026 in IET Circuits, Devices & Systems
Verified
Journal Article
Open access
MVMahdi Vakilfard
Mahdi Vakilfard
ATAsghar Taheri
Asghar Taheri
ASAmir GHASEMIAN Ghasemian Sahebi
Amir GHASEMIAN Ghasemian Sahebi
Typical resonant converter controllers are based on linearised averaged models, which have significant modelling errors when there are wide fluctuations in the input voltage, load and reference voltages. In this article, a piecewise affine (PWA) switching surface with active border tuning of affine sections, called the Partition Border Tuning (PBT) controller, is proposed for DC–DC series resonant converters (SRCs). Lyapunov stability analysis is used to ensure closed‐loop stability. A new Chattering Mitigation (CM) technique is proposed to suppress unwanted oscillations between modes and output voltage overshoot under transient conditions, which are generally present in conventional switching surface controllers. This technique eliminates chattering, reduces output voltage overshoot and limits the maximum inductor current and capacitor voltage amplitude of the resonant tank under transient conditions. Simulation and experimental data are presented to demonstrate the effectiveness of the proposed approach.