Building Information Modeling (BIM) represents a building as a static snapshot of the model’s state. The IFC standard does not define a formal mechanism that would link the same physical element across successive phases of a building’s life cycle. Design, construction, and operation are recorded in separate IFC files, and the same element is assigned different GUIDs in each. The result is fragmentation of the element’s identity, loss of the history of property changes, and the inability to formulate cross-phase queries. This paper proposes the BIM-Phase ontology, based on the fundamental DOLCE ontology, which solves this problem by introducing a distinction between a building element as an endurant and its life cycle phases as perdurants. The ontology comprises nine classes, six object relations, and six axioms expressed in OWL 2 DL. Phase properties and relations are represented using a reification pattern, which maintains full compatibility with the expressiveness of OWL 2 DL. The ontology was validated using the example of a single-family residential building developed in Autodesk Revit. Three structural elements (external wall, floor slab, column) were tracked across three phases of the life cycle. Eight competency questions covering scalar, constitutional, and mereological changes were defined and mapped to ontology constructs, confirming that BIM-Phase enables the recording of changes and the formulation of cross-phase queries that are impossible in classic IFC.
Building Information Modeling (BIM) usually represents a building as a static snapshot of the model’s state. Dynamic extensions, such as Internet of Things(IoT)-enabled sensing or immersive visualization, already exist, but the underlying data model remains state-based. The Industry Foundation Classes (IFC) standard does not define a formal mechanism that would link the same physical element across successive phases of a building’s life cycle. Design, construction, and operation are recorded in separate IFC files, and the same element is assigned different Globally Unique Identifiers (GUIDs) in each. The result is fragmentation of the element’s identity, loss of the history of property changes, and the inability to formulate cross-phase queries. This paper proposes the BIM-Phase ontology based on the fundamental Descriptive Ontology for Linguistic and Cognitive Engineering (DOLCE) ontology, which solves this problem by introducing a distinction between a building element as an endurant and its life cycle phases as perdurants. The ontology comprises nine classes, six object relations, and six axioms expressed in Web Ontology Language 2 Description Logic (OWL 2 DL). Phase properties and relations are represented using a reification pattern, which maintains full compatibility with the expressiveness of OWL 2 DL. The ontology was validated using an example of a single-family residential building developed in Autodesk Revit. Three structural elements (external wall, floor slab, and column) were tracked across three phases of the life cycle. Eight competency questions covering scalar, constitutional, and mereological changes were defined and mapped to ontology constructs, confirming that the BIM-Phase enables the recording of changes and the formulation of cross-phase queries that are impossible in classic IFC. All eight questions were answered correctly on the published knowledge graph, and the HermiT reasoner confirmed the logical consistency of the model. The findings show that preserving element identity across phases requires only a minimal ontological layer on top of existing standards. We recommend introducing persistent, phase-independent identifiers of building elements alongside IFC GUIDs, as this single change enables full lifecycle change tracking.
Меніски є конструктивними елементами літаючих об'єктів, надводних та підводних суден тощо. Технологічно меніски часто мають не тільки захисну, але й оптичну функції. Тому їх виготовляють із скла чи оптичної кераміки. Ці матеріали мають обмежену міцність. З іншого боку умови роботи менісків можуть бути складними. Тому актуальним є питання підвищення міцності сферичних менісків – зміцнення менісків.
30 June 2025 in Сучасні технології та методи розрахунків у будівництві
Проведене експериментальне дослідження ефективності балки з будівельним вигином. Для проведення натурного дослідження прогинів балки розроблена і сконструйована спеціальна експериментальна установка. Зразки балок виготовлено FDM 3D друком із coPET. Надруковано три типи експериментальних зразків балки: з прямою віссю (модельна балка), з вигином 100% та 200%. Моделювалася робота двохопорної балки з жорстко затисненими кінцями під зосередженим навантаження посередині балки. Вимірювався прогин під навантаженням. Проведені серії завантажень експериментальних зразків балок силою F=0-200 Н з приростом сили ΔF=10 Н. Побудовані діаграми залежності прогину модельної та вигнутих балок від навантаження. Виявлено ефект балки нульового прогину. Для перевірки результатів експериментальних випробувань робота досліджуваних балок аналітично та чисельно. Аналітичне моделювання дозволило модифікувати модуль пружності структури матеріалу 3D друку зразків. Результатами комп’ютерного моделювання у ПК ЛІРА узгоджуються з результатами експерименту та результатами аналітичного розрахунку. Візуалізація досліджень виконана у ПК FUSION. Вона в кольорі демонструє розподіл прогинів балки по довжині та ефективність балок з вигином щодо зменшення значень прогинів при збільшенні величини будівельного вигину. Проведені дослідження є черговим вкладом у вивчення явища будівельного вигину. Метою досліджень є розробка практичних технологій застосування будівельного вигину у реальному будівництві. Показана можливість використання технології 3D друку у натурному моделюванні конструкційних елементів будівельних споруд. Помічена залежність механічних характеристик структур 3D друку від режиму друку та параметрів мононитки.