Three-dimensional (3D) textiles prove characteristics in structures and performance which can be as attractive as to be the main object of a high number of research and applications in specialist markets (from small medical devices to large engineering structure) where the performance demands are severe ([1] in J Eng Fibers Fabr.). Nevertheless, much of the research has come from academia and there are few relatively small companies that, even if have expertise, lack the resources to develop R&D programmes. This prevents to broaden their application and to consolidate their use in new markets ([2] in Advances in 3D Textiles, pp 1-18). The paper aims at exploring the potentialities and future implementations of 3D textiles in architecture and fashion design. Both are fields where the demand to balance requirements of environmental sustainability, low time-consuming production and high performance is emerging, in their own respective scale. A set of more than 10 real case studies are collected and analysed with the aim at underlining the potentialities and the limits of 3D textiles in practice. The overview suggests that a more integrated workflow among modelling and simulation tools and bigger effort from industry to enhance manufacturing options and increase the interest on new material systems, bring about new application such as indoor environmental quality (IEQ) or human body protection.
Persistent poor acoustic conditions can imbalance humans’ psychophysical capabilities. A good acoustic project starts with either correct measurements of the existing acoustic parameters or with the correct hypothesis of new sound conditions. International standards define invasive measurement conditions and procedures that can disturb user activities. For this reason, alternative methodologies have been developed by mounting real-time sound-monitoring devices. Most of the research on these aims to decrease their dimensions in order to be placed in the tight service spaces of modern architecture and to reduce their aesthetic impact on interiors design. In this perspective, this article explores the features and potentialities of textile-based sound sensors (TSS) as they can not only fulfill these needs but can also be used as architectural ornaments by partially wrapping interiors. The ubiquitous of e-textiles for wearable applications has led to increasing the performance of TSS. Therefore, a comparison of the sensitivity values, signal-to-noise ratio and noise floor of sound TSS with sound sensors is presented, which is still missing in the literature. The paper demonstrates how these can be exploited for sound monitoring and can provide valid opportunities for new smart acoustic textiles.
The acoustics of architecture has a large influence on the physical and psychological state of people, impacting on their communication, concentration and behaviour. Nevertheless, the sound issues of the interior of common spaces are often faced in the last stage of the design process, as an accurate acoustic design requires a high level of expertise. Owners, companies, public administration, and so on face this issue by selecting off-the-shelf acoustic panels or furniture, which might not always respond to the acoustic requirements, specific for each space. This leads to unsatisfying acoustic conditions, consequently increasing the initial investment. Nowadays, a new awareness on the topic of architectural acoustics design has pushed towards finding new integrated methodologies able to deliver tailored solutions for the design with sound, which embed performance criteria early in the design phase by means of simulation and computational techniques. This paper describes a workflow developed in the frame of the research project: “EcoAcustica. Sustainable and innovative surfaces for adaptive acoustics”, aimed at creating acoustic surfaces and customised to improve the interior acoustics in a global geometry scale. The design of the new ABC Department Digital Fabrication Lab at Politecnico di Milano is used as a case study for the proposed methodology.
The limitations of active noise control (ANC) in coping with low frequencies and of passive noise control (PNC) in coping with middle-high frequencies are objects of research that present the potentialities of hybrid noise control (HBC). It aims at combining both of the behaviours by broadening the range of absorbed frequencies. Among the several application fields, the AEC (architecture, engineering, and construction) market can take advantage for those applications in which the noise conditions are caused by sound sources that tune in a broad frequencies range. In this frame, the paper describes the numerical and experimental validation of the active behaviour of an under-development project of a hybrid noise control-based acoustic bricks. The latter intends to embed the potentialities of active vibrational noise control (AVC) and passive destructive interference (PDI) in a unique design of an easy-to-mount, 3D-printed, customisable smart acoustic blocks. Active vibration control, the object of this paper, is provided by a 5-mm thick aluminium circular plate with an attached piezoelectric patch. The vibration of the latter, depending on a specific control law, defines the vibration of the plate itself achieving an abatement of the reflection coefficient. Through mathematical modelling and tests in an impedance tube, the results show that the control logic can reach an average abatement of the reflection coefficient of 82% in the frequency range 144–1007 Hz.
Acoustic textiles are the most widely used acoustic materials to control room acoustic parameters in current practice. Based on porous acoustic absorption, they are able to achieve high absorption at middle and high frequencies. This behaviour is a limitation for spaces that host speech comprehension or activities that require concentration. For this reason, acoustic sector companies tend to explore the advancements in other sectors (e.g. technical apparel, transportation, etc.) to find solutions that can satisfy this requirement. This is the case of 3D spacer fabrics (3D SFs) which, thanks to the two horizontal layers and the internal connecting vertical pile, have complex and customisable structures adaptable according to the acoustic performance (absorption, reflection, diffraction). Originally developed to provide sound insulation in transportation vehicles, these materials’ acoustic performance has been explored, but a comprehensive and updated research review is lacking. In response, this paper presents a systematic review aiming to understand the correlation between the physical characteristics of these materials and their acoustic performance. The review is based on the literature of the last 10 years of reviewed and published papers. Absorption coefficients are gathered, sorted and compared with the most extensively used acoustic materials. This contribution shows that the main performance analysed is absorption and this depends on thickness, porosity, and flow resistivity of the horizontal layers. The complex pile structure of 3D SF enables absorption coefficients that are comparable with the most common acoustic materials. The analysed references are based on literature absorption coefficients measured in an impedance tube. Future research should explore the possibilities of 3D SF application at an architectural scale by analysing the absorption coefficients in a reverberant chamber or by analysing reflection and diffraction behaviours.