Electromagnetic metasurfaces can be characterized as intelligent if they are able to perform multiple tunable functions, with the desired response being controlled by a computer influencing the individual electromagnetic properties of each metasurface inclusion. In this paper, we present an example of an intelligent metasurface that operates in the reflection mode in the microwave frequency range. We numerically show that, without changing the main body of the metasurface, we can achieve tunable perfect absorption and tunable anomalous reflection. The tunability features can be implemented using mixed-signal integrated circuits (ICs), which can independently vary both the resistance and reactance, offering complete local control over the complex surface impedance. The ICs are embedded in the unit cells by connecting two metal patches over a thin grounded substrate and the reflection property of the intelligent metasurface can be readily controlled by a computer. Our intelligent metasurface can have a significant influence on future space-time modulated metasurfaces and a multitude of applications, such as beam steering, energy harvesting, and communications.

Here we present a roadmap on Photonic metasurfaces. This document consists of a number of perspective articles on different applications, challenge areas or technologies underlying photonic metasurfaces. Each perspective will introduce the topic, present a state of the art as well as give an insight into the future direction of the subfield.

We present the experimental demonstration and interpretation of an ultrafast optically tunable, graphene-based thin film absorption modulator for operation in the THz regime. The graphene-based component consists of a uniform CVD-grown graphene sheet stacked on a SU-8 dielectric substrate which is grounded by a metallic ground plate. The structure shows enhanced absorption originated from constructive interference of the impinging and reflected waves at the absorbing graphene sheet. The modulation of this absorption, which is demonstrated via a THz time-domain spectroscopy setup, is achieved by applying an optical pump signal which modifies the conductivity of the graphene sheet. We report an ultrafast (of the order of 2.79~ps) absorption modulation in the order of 40\% upon photoexcitation. Our results provide evidence that the optical pump excitation results in the degradation of the graphene THz conductivity, which is connected with the generation of hot carriers, the increase of the electronic temperature and the dominant increase of the scattering rate over the carrier concentration as found in highly doped samples.

In this paper we present the theoretical considerations and the design evolution of a proof-of-concept reconfigurable metasurface, primarily used as a tunable microwave absorber, but also as a wavefront manipulation and polarization conversion device in reflection. We outline the design evolution and all considerations taken into account, from the selection of patch shape, unit cell size, and substrate, to the topology of the structure that realizes the desired tunability. The presented design conforms to fabrication restrictions and is co-designed to work with an integrated circuit chip for providing tunable complex loads to the metasurface, using a commercially available semiconductor process. The proposed structure can perform multiple tunable functionalities by appropriately biasing the integrated circuit: Perfect absorption for a wide range of incidence angles of both linear polarization states, accommodating a spectral range in the vicinity of 5 GHz, with potential also for wavefront control, exemplified via anomalous reflection and polarization conversion. The end vision is for such a design to be scalable and deployable as a practical HyperSurface, i.e., an intelligent multi-functional metasurface capable of concurrent reconfigurable functionalities: absorption, beam steering, polarization conversion, wavefront shaping, holography, and sensing.

A novel approach for reconfigurable wavefront manipulation with gradient metasurfaces based on permittivity‐modulated elliptic dielectric rods is proposed. It is shown that the required 2π phase span in the local electromagnetic response of the metasurface can be achieved by pairing the lowest magnetic dipole Mie resonance with a toroidal dipole Mie resonance, instead of using the lowest two Mie resonances corresponding to fundamental electric and magnetic dipole resonances as customarily exercised. This approach allows for the precise matching of both the resonance frequencies and quality factors. Moreover, the accurate matching is preserved if the rod permittivity is varied, allowing for constructing reconfigurable gradient metasurfaces by locally modulating the permittivity in each rod. Highly efficient tunable beam steering and beam focusing with ultrashort focal lengths are numerically demonstrated, highlighting the advantage of the low‐profile metasurfaces over bulky conventional lenses. Notably, despite using a matched pair of Mie resonances, the presence of an electric polarizability background allows to perform the wavefront shaping operations in reflection, rather than transmission. This has the advantage that any control circuitry necessary in an experimental realization can be accommodated behind the metasurface without affecting the electromagnetic response.

Software-defined metasurfaces are electromagnetically ultra-thin, artificial components that can provide engineered and externally controllable functionalities. The control over these functionalities is enabled by the metasurface tunability, which is implemented by embedded electronic circuits that modify locally the surface resistance and reactance. Integrating controllers within the metasurface cells, able to intercommunicate and adaptively reconfigure it, thus imparting a desired electromagnetic operation, opens the path towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing, programmable computing, and actuation facilities. In this work we take a crucial step towards bringing the AI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercell communication capabilities in a software-defined HyperSurface designed for operation in the microwave regime. We examine three different wireless communication channels within the landscape of the reflective metasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside a dedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each case we examine the physical implementation of the mm-wave transceiver nodes, we quantify communication channel metrics, and we identify complexity vs. performance trade-offs.