The integration of photovoltaic (PV) systems in buildings is crucial for reducing reliance on conventional energy sources while promoting sustainability. This study evaluates and compares three energy generation systems: rooftop PV, building-integrated photovoltaics (BIPV), and a hybrid combination of both. The analysis covers energy production, economic feasibility through the levelized cost of electricity (LCOE), and environmental impact by assessing unreleased carbon dioxide (UCD). A residential building in Kerman, Iran, serves as the case study. The results indicate that rooftop PV exhibits the lowest LCOE at USD 0.023/kWh, while BIPV has a higher LCOE of USD 0.077/kWh due to installation complexities. The hybrid system, combining both technologies, achieves a balance with an LCOE of USD 0.05/kWh while maximizing energy generation at 16.2 MWh annually. Additionally, the hybrid system reduces CO2 emissions by 9.7 tons per year, surpassing the standalone rooftop PV (5.0 tons) and BIPV (4.7 tons). The findings highlight the synergistic benefits of integrating both PV systems, ensuring higher self-sufficiency and enhanced environmental impact. This research underscores the necessity of comprehensive urban energy planning to optimize renewable energy utilization and accelerate the transition toward zero-energy buildings.
Semi-dry desulfurization is an efficient means of SO2 removal from the effluent gases from electrolysis cells in aluminum smelters. These gases are at low temperature and contain low concentrations of SO2, as opposed to thermal power plants. The removal is carried out by injecting powdered alkaline sorbent, hydrated lime (solid particles), into the SO2-containing gas (gas phase) in the presence of humidity. The reaction is controlled by the adsorption of SO2 onto the surface of lime. This study involves the mathematical modelling of a lab-scale scrubber using a Lagrangian-Eulerian approach in order to analyze the desulfurization efficiency. The model was validated based on experimental data. A parametric study was carried out to investigate the effects of particle size, sorbent amount, and relative humidity (RH) on the desulfurization efficiency. The results show that the particle size is the most important parameter; as the particle size decreases, the desulfurization efficiency increases. However, using finer particles may increase the process cost. The loss in SO2 capture efficiency due to the use of coarser particle size could be compensated by increasing the relative humidity (RH) of the gas, another key parameter of the process.