Reliable prediction of evaporative losses from reservoirs is an essential component of reservoir management and operation. Conventional models generally used for evaporation prediction have a number of drawbacks as they are based on several assumptions. A novel approach called the co-active neuro-fuzzy inference system (CANFIS) is proposed in this study for the modeling of evaporation from meteorological variables. CANFIS provides a center-weighted set rather than global weight sets for predictor–predictand relationship mapping and thus it can provide a higher prediction accuracy. In the present study, adjustments are made in the back-propagation algorithm of CANFIS for automatic updating of membership rules and further enhancement of its prediction accuracy. The predictive ability of the CANFIS model is validated with three well-established artificial intelligence (AI) models. Different statistical metrics are computed to investigate the prediction efficacy. The results reveal higher accuracy of the CANFIS model in predicting evaporation compared to the other AI models. CANFIS is found to be capable of modeling evaporation from mean temperature and relative humidity only, with a Nash–Sutcliffe efficiency of 0.93, which is much higher than that of the other models. Furthermore, CANFIS improves the prediction accuracy by 9.2–55.4% compared to the other AI models.
Barrier walls are considered one of the most effective methods for facilitating the retreat of saltwater intrusion (SWI). This research plans to examine the effect of using barrier walls for controlling of SWI in sloped unconfined aquifers. The sloping unconfined aquifer is considered with three different bed slopes. The SEAWAT model is implemented to simulate the SWI. For model validation, the numerical results of the seawater wedge at steady state were compared with the analytical solution. Increasing the ratio of flow barrier depth (db/d) forced the saltwater interface to move seaward and increased the repulsion ratio (R). With a positive sloping bed, further embedding the barrier wall from 0.2 to 0.7 caused R to increase from 0.3% to 59%, while it increased from 1.8% to 41.7% and from 3.4% to 46.9% in the case of negative and horizontal slopes, respectively. Embedding the barrier wall to a db/d value of more than 0.4 achieved a greater R value in the three bed-sloping cases. Installing the barrier wall near the saltwater side with greater depth contributed to the retreat of the SWI. With a negative bed slope, moving the barrier wall from Xb/Lo = 1.0 toward the saltwater side (Xb/Lo = 0.2) increased R from 7.21% to 68.75%, whereas R increased from 5.3% to 67% for the horizontal sloping bed and from 5.1% to 64% for the positive sloping bed. The numerical results for the Akrotiri coastal aquifer confirm that the embedment of the barrier wall significantly affects the controlling of SWI by increasing the repulsion ratio (R) and decreasing the SWI length ratio (L/La). Cost-benefit analysis is recommended to determine the optimal design of barrier walls for increasing the cost-effectiveness of the application of barrier walls as a countermeasure for controlling and preventing SWI in sloped unconfined aquifers.