Asanthi Jinasena

Dr. Asanthi Jinasena

Norwegian University of Science and Technology
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
Ingvild EspedalIngvild Espedal
Ingvild Espedal
AJAsanthi Jinasena
Asanthi Jinasena
Odne Stokke BurheimOdne Stokke Burheim
Odne Stokke Burheim
Jacob Joseph LambJacob Joseph Lamb
Jacob Joseph Lamb
Energy storage systems (ESSs) are critically important for the future of electric vehicles. Despite this, the safety and management of ESSs require improvement. Battery management systems (BMSs) are vital components in ESS systems for Lithium-ion batteries (LIBs). One parameter that is included in the BMS is the state-of-charge (SoC) of the battery. SoC has become an active research area in recent years for battery electric vehicle (BEV) LIBs, yet there are some challenges: the LIB configuration is nonlinear, making it hard to model correctly; it is difficult to assess internal environments of a LIB (and this can be different in laboratory conditions compared to real-world conditions); and these discrepancies can lead to raising the instability of the LIB. Therefore, further advancement is required in order to have higher accuracy in SoC estimation in BEV LIBs. SoC estimation is a key BMS feature, and precise modeling and state estimation will improve stable operation. This review discusses current methods use in BEV LIB SoC modelling and estimation. The review culminates in a brief discussion of challenges in BEV LIB SoC prediction analysis.

16 February 2022 in Frontiers in Chemical Engineering
Verified
Journal Article
Open access
AJAsanthi Jinasena
Asanthi Jinasena
LSLena Spitthoff
Lena Spitthoff
MWMarkus Solberg Wahl
Markus Solberg Wahl
JLJacob Joseph Lamb
Jacob Joseph Lamb
PSPaul R. Shearing
Paul R. Shearing
OBOdne Stokke Burheim
Odne Stokke Burheim
The temperature of the lithium-ion battery is a crucial measurement during usage for better operation, safety and health of the battery. In-situ monitoring of the internal temperature of the cells is an important input for temperature control of battery management systems and various other related measurements of the battery, such as state-of-charge and state-of-health. Currently, most commercial battery management systems rely on the surface temperature measurements of the cell. However, the internal temperature is comparatively higher than the surface temperature due to heat generation within the cell and lower heat rejection compared to the surface; therefore, accurate internal temperature monitoring methods are essential to improve our knowledge of battery safety and health. This paper reviews the most recent studies of various online internal temperature monitoring techniques under two main themes of hard sensors and soft sensors. The hard sensors include sensors that need to be inserted into the cell and other methods that use contact-less measuring techniques to infer the internal temperature. The soft sensors include estimators/observers that use surface measurements and various models to estimate the internal temperature. More focus is given to the soft sensors due to the lack of an existing, in-depth review of these. These methods are analyzed in detail with their accuracy, implementation, measurement frequency, and the common challenges and benefits are discussed. Further, possible future trends in internal temperature sensing are also discussed.

22 February 2021 in Batteries
Verified
Journal Article
Open access
PDF file
AJAsanthi Jinasena
Asanthi Jinasena
Odne Stokke BurheimOdne Stokke Burheim
Odne Stokke Burheim
ASAnders Strømman
Anders Strømman
The increasing use of electric vehicle batteries in the world has a significant impact on both society and the environment. Thus, there is a need for the availability of transparent information on resource allocation. Battery manufacturing process details in this regard are not available in academia or the public. The available energy data on manufacturing has a high variation. Furthermore, different process steps have different energy and material demands. A process model can benchmark the energy usage, provide detailed process data, and compare various cell productions which in turn can be used in life-cycle assessment studies to reduce the variation and provide directions for improvements. Therefore, a cell manufacturing model is developed for the calculation of energy and material demands for different battery types, plant capacities, and process steps. The model consists of the main process steps, machines, intermediate products and building service units. Furthermore, the results are validated using literature values. For a case study of a 2 GWh plant that produces prismatic NMC333 cells, the total energy requirement on a theoretical and optimal basis is suggested to be 44.6Whinproduction/Whcellcapacity. This energy consumption in producing batteries is dominated by electrode drying, and dry room. Energy usage for a variety of cell types for a similar plant capacity shows that the standard deviation in the results is low (47.23±13.03Wh/Wh).

17 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
MWMarkus Solberg Wahl
Markus Solberg Wahl
LSLena Spitthoff
Lena Spitthoff
HMHarald Ian Muri
Harald Ian Muri
AJAsanthi Jinasena
Asanthi Jinasena
Odne Stokke BurheimOdne Stokke Burheim
Odne Stokke Burheim
Jacob Joseph LambJacob Joseph Lamb
Jacob Joseph Lamb
Lithium-ion batteries (LiBs) are widely used as energy storage systems (ESSs). The biggest challenge they face is retaining intrinsic health under all conditions, and understanding internal thermal behaviour is crucial to this. The key concern is the potentially large temperature differences at high charge/discharge rates. Excess heat created during charge/discharge will accelerate irreversible aging, eventually leading to failure. As a consequence, it is important to keep battery states within their safe operating range, which is determined by voltage, temperature, and current windows. Due to the chemically aggressive and electrically noisy environment, internal temperature measurement is difficult. As a result, non-invasive sensors must be physically stable, electromagnetic interference-resistant, and chemically inert. These characteristics are provided by fibre Bragg grating (FBG) sensors, which are also multiplexable. This review article discusses the thermal problems that arise during LiB use, as well as their significance in terms of LiB durability and protection. FBG-based sensors are described as a technology, with emphasis on their importance for direct temperature measurement within the LiB cell.

19 June 2019 in IEEE Sensors Journal
Verified
Journal Article
Closed access
AJAsanthi Jinasena
Asanthi Jinasena
GKGlenn-Ole Kaasa
Glenn-Ole Kaasa
RSRoshan Sharma
Roshan Sharma
Early kick and loss detection is a major concern in any drilling operation. A real-time return flow rate measurement would be an added advantage for the early kick and loss detection for conventional drilling systems. In this paper, the real-time estimation of the return flow rate during drilling is studied, using a Venturi channel. A reduced order, 1D, mathematical equation for the shallow water flow/open flow in the Venturi channel is investigated with various non–Newtonian friction models. The volumetric fluid flow rate is estimated online using an unscented Kalman filter. In order to improve the fluid flow rate estimation, the model is adapted to some of the rheological parameters in real time. A simple and effective fit–for–purpose friction model is developed and compared with the other friction models from literature. The fit–for–purpose model has the least estimation error (RMSE 1.465%) and requires less information as inputs. The proposed method exhibits promising potential to be used as an online return flow rate measurement for early kick and loss detection in conventional drilling.

27 September 2017
Verified
Conference Paper
Open access
PDF file
AJAsanthi Jinasena
Asanthi Jinasena
GKGlenn-Ole Kaasa
Glenn-Ole Kaasa
RSRoshan Sharma
Roshan Sharma
The modeling and simulation of free surface flows are complex and challenging. Especially, the open channel hydraulics are often modeled by the well-known and efficient Saint-Venant equations. The possibility of efficiently reducing these partial differential equations into ordinary differential equations with the use of orthogonal collocation method is studied with the goal of application in estimations. The collocation method showed the flexibility of choosing the boundary conditions with respect to the flow behavior. The results were comparable enough to the selected finite volume method. Further, a significant reduction in computational time in the collocation method is observed. Therefore, the collocation method shows a good possibility of using it for the real-time estimation of flow rate in an open channel.