The purpose of this study was to investigate the extract of Catalpa bignonioides plants and characterize novel natural cellulosic fibers from the fruits as an alternative material for sustainable products. The Catalpa bignonioides tree contains pharmacologically active compounds and is found all over the world. The sustainable natural fibers were easily extracted in an environmentally friendly manner from the fruits of the plant and characterized in terms of their chemical, thermal, and physical properties. The Catalpa bignonioides fibers (CBF) were composed of cellulose (58.3%), hemicellulose (3.1%), and lignin (38.6%) and had a low density (0.713 g/cm3). Fourier transform (FT-IR) analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses were used to search for the chemical groups, crystalline structures, and surface morphology of the CBF fibers. The results suggest that CBF fibers are a suitable alternative for composite and textile applications.
The magnetic chitosan/PVA/iron oxide nanoparticles have been synthesized for the usage of Cu(II) ions removal from aqueous solution. The structure and morphology of the adsorbent was investigated by X-Ray diffraction, scanning electron microscope, and Fourier transform infrared analyses. Adsorption performances of the adsorbents were tested as a function of Cu(II) ion concentration, pH value, time, and temperature. The adsorption kinetics and isotherms were analyzed by Lagergren first-order, pseudo-second-order, Elovich equation, intra-particle diffusion models, and Langmuir, Freundlich, DR and BET isotherms, respectively. The kinetics results pointed out pseudo-second-order. Maximum sorption capacity of the adsorbent was estimated to be 500 mg/g at pH 5.0. Thermodynamic parameters such as Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes were also determined and indicated that the sorption process was endothermic in nature. The magnetic results showed that the adsorbent can be manipulated by an external magnet with sufficient separation. The process is clean, safe, and easy enough for the removal of Cu(II) ions.
23 June 2020 in Journal of the Turkish Chemical Society Section A: Chemistry
We describe the use of a home-made fiber coated by graphene oxide modified by an ionic liquid having methylimidazolium cation with an amino-functional group for the extraction of polyphenolic compounds (P.C.s). We then performed the determination by gas chromatography coupled with mass spectrometry after on-fiber derivatization. The authors optimized the main parameters influencing the extraction and derivatization processes. The on-fiber derivatization was employed within 15 min at 60 ºC using 20 µL of trimethylsilyl reagents. Under the optimized conditions, the calibration curves for 12 P.C.s were linear from 0.1 to 1000 µg/L, and the detection limits were between 0.02 and 0.1 µg/L. We determined the single fiber repeatability obtained for all calibration points and the fiber to fiber reproducibility for 100 µg/L to be < 14.82% and < 5.87%, respectively. The extraction efficacy of the home-made fiber due to high intermolecular and electrostatic attractions was much better than the commercial fibers. We successfully applied the method to the analysis of P.C.s in wine samples with the recoveries from 72.8 to 99.9%.
This study investigates the synthesis and application of acrylic–urethane hybrid polymer dispersions as advanced binders for leather finishing. Two polymerization techniques—seeded emulsion and miniemulsion—were used to produce hybrid polymer dispersions by varying the ratios of polyurethane (PU) and acrylic (AC). The synthesized dispersions, i.e., the hybrid polyurethanes, showed stable, uniform particle sizes, inferring good compatibility and interaction between the PU and AC phases, as confirmed by particle sizes, FTIR, and DSC analyses. The performance of the coating on leather surfaces was assessed by using standard physical tests, including rubbing fastness, flexing endurance, water spot resistance, and grain strength. The results showed that the hybrid polymers outperformed their individual PU and AC counterparts, particularly in terms of abrasion resistance and mechanical integrity. Of the two polymerization techniques, the seeded emulsion hybrids exhibited superior coating properties, providing greater resistance to cracking and abrasion under stress, improved grain strength, and better color retention during rubbing tests. These findings highlight the potential of acrylic–urethane hybrids, particularly those prepared via seeded emulsion polymerization, to address the limitations of traditional binders in high-performance leather applications.
7 April 2020 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Katalitik ozonlama proseslerinde nihai hedef kirleticinin son ürüne okside edilmesidir; fakat zincirleme oksidasyon reaksiyonları sonucunda bazı ara ürünler son ürüne kadar okside olamamaktadır. Bu oksidasyon ara ürünlerinin dezenfeksiyon işlemine tabi tutulması sonrasında ise daha toksik/kanserojenik/mutajenik ara ürünler meydana gelebilmektedir. Katalitik ozonlama prosesleri üzerine literatürde yapılan birçok çalışmada “hedef kirleticilerin” giderim verimliliği ve giderim maliyeti üzerine yoğunlaşılmış olsa da oluşan ara ürünler çoğu çalışmada takip edilmemiştir. Bu sebeple katalitik ozonlama proseslerinin nihai bertaraf yöntemi olarak kullanılabilirliği halen sorgulanmaktadır. Bu çalışmada, yüzeysel sulardaki doğal organik maddeleri temsilen sentetik olarak hazırlanmış hümik asit çözeltilerinin gümüş bazlı nanopartiküllerle zenginleştirilmiş montmorillonit katalizörlüğünde ozonlama prosesleri ile arıtılabilirliği araştırılmıştır. Katalizör dozlarının değiştirildiği arıtım çalışmalarında doğal organik maddenin bozunumu ve alifatik-aromatik yapısındaki değişimleri izlenilmiştir. Arıtma işlemi sonrasında çıkış suları klorla dezenfeksiyon işlemine tabi tutularak oluşan Trihalometan (THM) ve Haloasetik Asit (HAA) türleri kantitatif olarak diğer oksidasyon ara ürünleri ise kalitatif olarak tespit edilmiştir.