We propose and demonstrate a computational imaging technique that uses structured illumination based on a two-dimensional discrete cosine transform to perform imaging with a single-pixel detector. A scene is illuminated by a projector with two sets of orthogonal patterns, then by applying an inverse cosine transform to the spectra obtained from the single-pixel detector a full-colour image is retrieved. This technique can retrieve an image from sub-Nyquist measurements, and the background noise is easily cancelled to give excellent image quality. Moreover, the experimental set-up is very simple.
29 September 2024 in Light: Science & Applications
Miniaturized on-chip spectrometers with small footprints, lightweight, and low cost are in great demand for portable optical sensing, lab-on-chip systems, and so on. Such miniaturized spectrometers are usually based on engineered spectral response units and then reconstruct unknown spectra with algorithms. However, due to the limited footprints of computational on-chip spectrometers, the recovered spectral resolution is limited by the number of integrated spectral response units/filters. Thus, it is challenging to improve the spectral resolution without increasing the number of used filters. Here we present a computational on-chip spectrometer using electrochromic filter-based computational spectral units that can be electrochemically modulated to increase the efficient sampling number for higher spectral resolution. These filters are directly integrated on top of the photodetector pixels, and the spectral modulation of the filters results from redox reactions during the dual injection of ions and electrons into the electrochromic material. We experimentally demonstrate that the spectral resolution of the proposed spectrometer can be effectively improved as the number of applied voltages increases. The average difference of the peak wavelengths between the reconstructed and the reference spectra decreases from 1.61 nm to 0.29 nm. We also demonstrate the proposed spectrometer can be worked with only four or two filter units, assisted by electrochromic modulation. In addition, we also demonstrate that the electrochromic filter can be easily adapted for hyperspectral imaging, due to its uniform transparency. This strategy suggests a new way to enhance the performance of miniaturized spectrometers with tunable spectral filters for high resolution, low-cost, and portable spectral sensing, and would also inspire the exploration of other stimulus responses such as photochromic and force-chromic, etc, on computational spectrometers.
Ghost imaging captures 2D images with a point detector instead of an array sensor. It could therefore solve the challenge of building cameras in wave bands where sensors are difficult and expensive to produce and could open up more routine THz, near-infrared, lifetime, and hyperspectral imaging simply by using single-pixel detectors. Traditionally, ghost imaging retrieves the image of an object offline by correlating measured light intensities with pre-designed illuminating patterns. Here we present a “self-evolving” ghost imaging (SEGI) strategy for imaging objects bypassing offline post-processing. It also offers the capability to image objects in turbid media. By inspecting the optical feedback, we evaluate the illumination patterns by a cost function and generate offspring illumination patterns that mimic the object’s image, bypassing the reconstruction process. At the initial evolving state, the object’s “genetic information” is stored in the patterns. At the following imaging stage, the object’s image ( ) can be updated at a 40 Hz imaging rate. We numerically and experimentally demonstrate this concept for static and moving objects. The frame-memory effect between the self-evolving illumination patterns provided by the genetic algorithm enables SEGI imaging through turbid media. We further demonstrate this capability by imaging an object placed in a container filled with water and sand. SEGI shows robust and superior imaging power compared with traditional computational ghost imaging. This strategy could enhance ghost imaging in applications such as remote sensing, imaging through scattering media, and low-irradiative biological imaging.