Youcef Belhout

Dr. Youcef Belhout

Mechanical Engineering Department, University of Blida, Blida, Algeria
orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 September 2026 in Biomass
Verified
Journal Article
Open access
PDF file
Youcef BelhoutYoucef Belhout
Youcef Belhout
BBBoussad Boumeddane
Boussad Boumeddane
David VeraDavid Vera
David Vera
ABAbdallah Benarous
Abdallah Benarous
The depletion of fossil fuels and the need to valorize agricultural residues motivate biomass-to-electricity pathways coupling gasification with an efficient, low-emission prime mover. This study evaluates four residues—olive pomace (Fuel A), olive tree pruning (Fuel B), date palm seeds (Fuel C), and date pits (Fuel D)—converted into H2-rich syngas and supplied to a homogeneous charge compression ignition (HCCI) engine. A three-dimensional CFD model with GRI-Mech 3.0 detailed chemical kinetics resolves the in-cylinder combustion of each syngas, supported by a qualitative cross-study physical-consistency comparison against published syngas-HCCI pressure data. Intake temperature, equivalence ratio, and EGR are varied at both fixed equivalence ratio and fixed fuel-energy input per cycle. At fixed ϕ=0.40, CA50 remains nearly uniform across the four fuels despite the more-than-twofold variation in H2/CO, whereas peak pressure differs substantially: steam-gasified date-seed syngases (Fuels C and D; H2/CO = 1.21–2.00) reach 93–97 bar, compared with 79–83 bar for air-blown olive-residue syngases (Fuels A and B; H2/CO = 0.76–0.89), though the baseline maximum pressure-rise rate exceeds the adopted engine-damage threshold for all four fuels. Indicated thermal efficiency ranges from 43.2 to 44.4% across the four fuels. CO and UHC emissions are generally lower in the more hydrogen-rich cases, whereas NOx varies non-monotonically with fuel composition and operating condition. Combining literature-derived gasification cold-gas efficiencies with the engine results gives an estimated upper-bound biomass-to-electricity efficiency of approximately 26–28% and a base-case LCOE of 0.071 USD/kWh, with combined scenario bounds of 0.025–0.150 USD/kWh, based on adopted techno-economic assumptions and a baseline operating point that would require further mitigation to meet the adopted pressure-rise-rate limit. The results provide a feedstock-resolved basis for assessing agro-industrial residue-to-electricity pathways in decentralized, off-grid applications.