Bharathi Konkena

Dr. Bharathi Konkena


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2023 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
Bharathi KonkenaBharathi Konkena
Bharathi Konkena
CKChakrapani Kalapu
Chakrapani Kalapu
HKHarneet Kaur
Harneet Kaur
AHAngelika Holzinger
Angelika Holzinger
HGHugh Geaney
Hugh Geaney
JCJonathan N. Coleman
Jonathan N. Coleman
Cobalt oxide (Co3O4)-based nanostructures have the potential as low-cost materials for lithium-ion (Li-ion) and sodium-ion (Na-ion) battery anodes with a theoretical capacity of 890 mAh/g. Here, we demonstrate a novel method for the production of Co3O4 nanoplatelets. This involves the growth of flower-like cobalt oxyhydroxide (CoOOH) nanostructures at a polarized liquid|liquid interface, followed by conversion to flower-like Co3O4 via calcination. Finally, sonication is used to break up the flower-like Co3O4 nanostructures into two-dimensional (2D) nanoplatelets with lateral sizes of 20-100 nm. Nanoplatelets of Co3O4 can be easily mixed with carbon nanotubes to create nanocomposite anodes, which can be used for Li-ion and Na-ion battery anodes without any additional binder or conductive additive. The resultant electrodes display impressive low-rate capacities (at 125 mA/g) of 1108 and 1083 mAh/g, for Li-ion and Na-ion anodes, respectively, and stable cycling ability over >200 cycles. Detailed quantitative rate analysis clearly shows that Li-ion-storing anodes charge roughly five times faster than Na-ion-storing anodes.

22 July 2024 in ACS Nano
Verified
Journal Article
Open access
HKHarneet Kaur
Harneet Kaur
Bharathi KonkenaBharathi Konkena
Bharathi Konkena
MMMark McCrystall
Mark McCrystall
KSKevin Synnatschke
Kevin Synnatschke
CGCian Gabbett
Cian Gabbett
JCJonathan N Coleman
Jonathan N Coleman
Here, we demonstrate the production of 2D nanosheets of arsenic disulfide (As2S3) via liquid-phase exfoliation of the naturally occurring mineral, orpiment. The resultant nanosheets had mean lateral dimensions and thicknesses of 400 and 10 nm, and had structures indistinguishable from the bulk. The nanosheets were solution mixed with carbon nanotubes and cast into nanocomposite films for use as anodes in potassium-ion batteries. These anodes exhibited outstanding electrochemical performance, demonstrating an impressive discharge capacity of 619 mAh/g at a current density of 50 mA/g. Even after 1000 cycles at 500 mA/g, the anodes retained an impressive 94% of their capacity. Quantitative analysis of the rate performance yielded a capacity at a very low rate of 838 mAh/g, about two-thirds of the theoretical capacity of As2S3 (1305 mAh/g). However, this analysis also implied As2S3 to have a very small solid-state diffusion coefficient (∼10-17 m2/s), somewhat limiting its potential for high-rate applications.

15 October 2024 in Energy & Fuels
Verified
Journal Article
Open access
MMMark McCrystall
Mark McCrystall
CGCian Gabbett
Cian Gabbett
HKHarneet Kaur
Harneet Kaur
TCTian Carey
Tian Carey
JMJose Munera
Jose Munera
Bharathi KonkenaBharathi Konkena
Bharathi Konkena
The liquid-phase exfoliation process has been successfully applied to nonlayered materials to produce quasi-2D nanoplatelets. A slight variation in bonding anisotropy in the starting material can result in the formation of 2D platelet-shaped particles with a relatively low aspect ratio. This advancement offers a promising strategy to create 2D materials from previously unexplored materials. In this study, we investigate the liquid-phase exfoliation of arsenic sulfide (As4S4), an intriguing nonlayered van der Waals material. The liquid exfoliation process generates highly disordered, low aspect ratio quasi-2D platelets. These As4S4 flakes can be easily mixed with carbon nanotubes to create nanocomposite anodes, which are appropriate for use in both Li-ion and Na-ion batteries eliminating the need for extra binders or conductive additives. The As4S4/SWCNT electrodes exhibit impressive low-rate capacities of 1202 mA h g-1 at 0.1 A g-1 for Li-ion cells and 753 mA h g-1 at 0.05 A g-1 for Na-ion cells, along with commendable cycling stability over more than 300 cycles. Detailed quantitative rate assessment clearly shows that these electrodes are limited by solid-state diffusion and emphasizing the possibility of reaching a capacity that comes close to the theoretical value which confirms the near full utilization of the active material.

1 July 2026 in Energy & Fuels
Verified
Journal Article
Closed access
Bharathi KonkenaBharathi Konkena
Bharathi Konkena
HKHarneet Kaur
Harneet Kaur
CGCian Gabbett
Cian Gabbett
MVMunuswamy Venkatesan
Munuswamy Venkatesan
MMMark McCrystall
Mark McCrystall
JCJonathan N. Coleman
Jonathan N. Coleman