We present a miniaturized optical fiber tip Fabry-Perot interferometer for high-temperature measurement based on a concave-shaped cavity. The fabrication process of the diaphragm-free Fabry-Perot cavity is quite simple, involving only two steps: fusion splicing and cleaving. By adjusting the arc power during fusion splicing, a concave-shaped structure is obtained, through which the light is coupled/split into the wall of the spliced hollow core fiber. By cleaving the end-face of the hollow core fiber, a concave-shaped diaphragm-free Fabry-Perot interferometer is formed. The temperature response of the sensor was demonstrated, showing a high-temperature tolerance up to 1000 °C and a sensitivity of 0.01226 nm/°C. The proposed sensor, with all-silica-structure, high compactness, robustness, and ease of fabrication, could find wide applications in high-temperature harsh environments.
9 November 2022 in Photonics and Nanostructures - Fundamentals and Applications
This work reports a simple optical fiber Surface Plasmon Resonance (SPR) sensor with ultra-high sensitivity for simultaneous measurement of the dual-parameter. The sensor is based on a D-shaped fiber with a nanolayer coating of Silver (Ag) and Hematite (α−Fe 2 O 3 ). The Ag/α− Fe 2 O 3 layer is deposited on the longitudinal surface of residual cladding, and a Fiber Bragg Grating (FBG) is inscribed on the single-mode fiber (SMF) for temperature compensation. The α− Fe 2 O 3 layer protects the Ag layer from oxidation and effectively enhances the surface plasmon wave while interacting with free electrons. Finite Element Method (FEM) modeling is employed to investigate the refractive index (RI) and temperature response of the SPR sensor. The SPR sensor exhibits an ultra-high RI sensitivity of 8,518 nm/RIU (refractive index unit) in the RI range of 1.33 to 1.40, and a temperature sensitivity of -52 pm/°C in the temperature range of 20°C to 60°C. The SPR performance suggests that it is a potential candidate for various applications of dual-parameter sensing.