Carlo Cintolesi

Dr. Carlo Cintolesi

University of Bologna
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2017 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Open access
CCCarlo Cintolesi
Carlo Cintolesi
HNHåkan Nilsson
Håkan Nilsson
APAndrea Petronio
Andrea Petronio
VAVincenzo Armenio
Vincenzo Armenio
A parametric investigation of radiative heat transfer is carried out, including the effects of conjugate heat transfer between fluid and solid media. The thermal radiation is simulated using the P1-model. The numerical model and the thermal coupling strategy, suitable for a transient solver, is described. Such numerical coupling requires that the radiative equation is solved several times at each iteration; hence, the computational cost of the radiative model is a crucial issue. The P1-model is adopted because of its particularly fast computation. First, a collection of benchmark cases is presented and used to carefully validate the radiation model against literature results and to analyse the model prediction limits. Despite the simplicity of the model, it satisfactorily reproduces the thermal radiation effects. Some lack of accuracy is identified in particular cases. Second, a number of benchmark cases are described and adopted to investigate fluid–solid thermal interaction in the presence of radiation. Three cases are designed, to couple radiation with: pure conduction, conduction and forced convection, conduction and natural convection. In all the cases, the surface radiative heat transfer strongly influences the system thermodynamics, leading to a significant increase of the fluid–solid interface temperature. The main non-dimensional numbers, related to the mutual influence of the different heat transfer modes, are introduced and employed in the analyses. A new conduction-radiation parameter is derived in order to study the conductive boundary layer in absence of convective heat transfer

14 September 2018 in Environmental Fluid Mechanics
Verified
Journal Article
Open access
PDF file
CCCarlo Cintolesi
Carlo Cintolesi
APAndrea Petronio
Andrea Petronio
VAVincenzo Armenio
Vincenzo Armenio
In the present paper we study buoyant (plume) and non-buoyant (jet) fluid injection in a neutrally stratified uniform cross-flow. Both cases are of practical importance in environmental fluid mechanics. The study is carried out numerically, using highly resolved large-eddy simulation in conjunction with the Lagrangian dynamic sub-grid scale model for both momentum and scalar transport equations. The velocity ratio is \(\kappa =8\). In the plume case, the Froude number is \(F=10\), such to allow the use of the Boussinesq approximation. The simulations are successfully validated against experimental data and well established semi-empirical relations. The study shows the existence of three different regions as regards the plume evolution, each of them characterised by different peculiarities: in momentum-buoyancy region the plume exhibits an almost steady cylindrical shape with relative small turbulence structures; in deflection region the plume is deviated horizontally and a high shear rate is detected; in entrainment region the vortex pair develops, along with the sausage-like turbulent structure. The comparison between the plume and the jet case shows that the latter has a higher eccentricity while its trajectory height is sensibly lower. Also, the sausage-like structures are not present. Finally, an empirical formula for the jet trajectory is given, although its full validation will require additional studies.

21 July 2012 in Journal of Statistical Physics
Verified
Journal Article
Closed access
PDF file
LBLuigi Barletti
Luigi Barletti
CCCarlo Cintolesi
Carlo Cintolesi

23 March 2021 in Boundary-Layer Meteorology
Verified
Journal Article
Open access
PDF file
CCCarlo Cintolesi
Carlo Cintolesi
BPBeatrice Pulvirenti
Beatrice Pulvirenti
SSSilvana Di Sabatino
Silvana Di Sabatino
Techniques for improving the removal of pollution from urban canyons are crucial for air quality control in cities. The removal mainly occurs at the building roof level, where it is supported by turbulent mixing and hampered by roof shear, which tends to isolate the internal canyon region from the atmospheric flow. Here, a modification of roof infrastructures is proposed with the aim of increasing the former and reducing the latter, overall enhancing the removal mechanisms. The topic is investigated by numerical experiment, using large-eddy simulation to study the paradigmatic case of a periodic square urban canyon at $$ Re=2 \times 10^4$$ R e = 2 × 10 4 . Two geometries are analyzed: one with a smooth building roof, the other having a series of solid obstacles atop the upwind building roof. The pollutant is released at the street level. The simulations are successfully validated against laboratory and numerical datasets, and the primary vortex displacement detected in some laboratory experiments is discussed. The turbulence triggered by the obstacles destroys the sharp shear layer that separates the canyon and the surrounding flow, increasing the mixing. Greater vertical turbulent mass fluxes and more frequent ejection events near the upwind building (where pollution accumulates) are detected. Overall, the obstacles lead to a reduction in the pollution concentration within the canyon of about $$34\%$$ 34 % .

1 September 2015 in Physics of Fluids
Verified
Journal Article
Closed access
CCCarlo Cintolesi
Carlo Cintolesi
APAndrea Petronio
Andrea Petronio
VAVincenzo Armenio
Vincenzo Armenio
Turbulent natural convection in enclosure is a paradigmatic case for wide class of processes of great interest for industrial and environmental problems. The solid-fluid thermal interaction, the anisotropy of the turbulence intensity in the flow field along with the transient nature of heat transfer processes, pose challenges regarding the numerical modeling. The case of a square cavity with differently heated vertical walls and two horizontal conductive plates is studied at Ra = 1.58 × 109. The study is carried out numerically, using large-eddy simulation together with a dynamic Lagrangian turbulence model and a conjugate heat transfer method to take into account heat transfer at the solid surfaces. First, validation is carried out against the literature experimental and numerical data. The results of validation tests evidence the limitations of using the adiabatic conditions as a model for reproducing an insulator. In fact, the adiabatic condition represents the asymptotic behavior which is often difficult to reach in real conditions. Successively, the model is used to investigate the effect on the flow field of different materials composing the horizontal walls. Initial conditions representative of physical experiment are used. In order to reduce the computational time required for a simulation with insulating materials at the walls, a four-step temperature advancement strategy is proposed, based on the artificial reduction-first and recover-later of the specific heat coefficient Cp of the materials at different stages of the simulation. The conductivity of the solid media is found to influence the flow configuration since heat transfer at the solid walls substantially modifies the turbulent field and makes the flow field less homogeneous along the horizontal direction.

19 January 2023 in Climate
Verified
Journal Article
Open access
PDF file
Petros AmpatzidisPetros Ampatzidis
Petros Ampatzidis
CCCarlo Cintolesi
Carlo Cintolesi
TKTristan Kershaw
Tristan Kershaw
A growing body of literature recognises the importance of nature-based solutions in providing resilience to the effects of climate change by mitigating urban heat islands. However, a knowledge gap exists regarding the contribution of blue spaces to the urban environment. Recent evidence suggests that blue spaces within urban canyons can promote pollutant removal via the vertical transport of air under certain conditions, but this is inconclusive. Using a numerical solver that accounts for evaporation effects, we investigate the influence of blue space size and shape on the in-canyon flow structure, temperature and water vapour distribution. Simulations were performed for water bodies of varying size and shape at different temperatures compared to the surrounding air. Results suggest that inadequately sized warmer water bodies are unable to promote sufficient vertical transport for pollutant removal, leading to overturning and increased temperature and humidity levels at the pedestrian level, thereby worsening environmental conditions and increasing the risk of heat-related illness and mortality. Hence, larger water bodies are better suited to nocturnal transport of pollutants and accumulated warm air away from the urban surface, while smaller water bodies are better suited to providing localised evaporative cooling. Lastly, irregular water bodies may have a greater cooling effect across a larger area.