This study utilized eggshell biomass as a calcium precursor for synthesizing hydroxyapatite (Hap) through a co-precipitation method assisted by a combined microwave-ultrasound (Mu/Us) crystallization process. Different milling techniques (mortar, high-energy mill, and sieving) were employed to prepare the eggshell biomass and identify the most effective calcium precursor. The precursor derived from high-energy milling, followed by sieving and thermal treatment at 750 °C (designated as Sample Hap-H3 750), was selected due to its higher porosity, enhanced crystallinity, and smaller particle size than other synthesized materials. This sample was subsequently used as a carrier for the plant hormone forchlorfenuron (FCF), forming the composite Hap-FCF. Comprehensive characterization was conducted using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), specific surface area analysis (BET method), zeta potential (ZP), scanning electron microscopy (SEM), and bright-field transmission electron microscopy (BFTEM), ensuring reliable and robust data. The in silico evaluation of the phytohormone FCF with two receptors, gibberellin (GA3Ox2) and auxin (IAA7), produced notable results. Docking and molecular dynamics (MD) simulations demonstrated that the gibberellin receptor was preferentially stimulated, as shown by the higher binding affinity and the receptor’s sustained stability during the MD simulations. These findings underscore the potential applications of this research, emphasizing its significance in materials science and biochemistry. Moreover, the in vitro assessment of Hap-H3 750, Hap-FCF, FCF, and the control (distilled water) on the germination and growth of butterhead lettuce seeds (Lactuca sativa) over 30 days revealed that Hap-H3 750 and Hap-FCF promoted plant growth by 275–330% relative to the control. This effect was attributed to the preferential stimulation of the gibberellin receptors responsible for stem and root elongation. These results suggest that HAP nanoparticles could facilitate the controlled delivery of FCF in the agricultural sector, promising to be an effective nanofertilizer.

This investigation has been developed to determine which microstructural changes on the eutectic α-Ni-Ni₃Si_{- monoclinic}, if any exist, result from the irradiation with Ni-ions. SRIM program has been used to simulate the interaction of the irradiation with both α-Ni and Ni₃Si_{- monoclinic} phases. X-ray diffraction studies of irradiated and non-irradiated regions have allowed us to establish that the ion irradiation promote the formation of the Ni₃₁Si_12-hexagonal intermetallic phase with hexagonal structure. An analysis of the irradiated region by High Resolution Transmission Electron Microscopy (HRTEM) confirmed the presence of the Ni₃₁Si_12-hexagonal intermetallic phase, establishing at the same time, its crystallographic relationship with the matrix. Evidently, radiation-induced segregation could cause significant changes in the chemical composition of concentrated alloys. This experimental discovery, in particular, is significant because the formation of the Ni₃₁Si_12-hexagonal phase under irradiation conditions had never been mentioned before. Nonetheless, the formation of the Ni₃₁Si_12-hexagonal intermetallic phase represents an advance in the field of the microstructural modification by ion beam irradiation, and as a consequence of this finding, it is possible to establish that the structural stability of the eutectic form of the α-Ni-Ni₃Si_-monoclinic phases under severe irradiation conditions, is questionable.

Dilute alloys of Ni–Si binary system have been used as base material to study microstructural changes caused by irradiation in complex alloys. However, non-dilute Ni–Si alloys, which are themselves also important for high-temperature applications, have been little studied under irradiation. In this paper, the behavior of a hypereutectic alloy, Ni22at.%Si, under severe irradiation conditions is evaluated, to determine changes induced on the surface and elucidate the possible mechanisms that promote them. As a result of irradiating this alloy with Ni ions of 3.66 MeV at 650°C and an incidence perpendicular to the surface, the presence of nanohills is detected, as well as groove patterns and craters, which formation is attributed to different sputtering mechanisms. To characterize these changes, optical, scanning electron and atomic force microscopies were used. Comparing the experimental findings with some of the most important physical models of sputtering, it was concluded that such changes to the surface microstructure strongly depend on the amount of energy deposited during irradiation and on how it is distributed in the microstructural features developed in the alloy during its manufacture. Moreover, when the radiation dose was changed to evaluate the sputtering yield as a dose function, it was detected as geometric sputtering mechanism.

As a study result of irradiation-induced damage, various mathematical models have been developed to explain the phenomenon of irradiation-induced surface sputtering, these models are currently used in technological fields as diverse as materials characterization and in thin film deposition used in the manufacture of electronic or medical components. However, the phenomenon is not fully understood due to its high complexity, this work has the goal to present experimental evidence of the changes induced in the surface of hypereutectic alloy Ni-22% at Si promoted by the nickel ion beam irradiation, the surface changes induced will be explained in terms of the Sigmund theory of surface sputtering.