Carlos Andres Cardenas Balaguera

Prof. Dr. Carlos Andres Cardenas Balaguera

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2020 in Construction and Building Materials
Verified
Journal Article
Closed access
Carlos Andres Cardenas BalagueraCarlos Andres Cardenas Balaguera
Carlos Andres Cardenas Balaguera
MBMaryory Astrid Gómez Botero
Maryory Astrid Gómez Botero

1 September 2019 in Ingeniería e Investigación
Verified
Journal Article
Open access
PDF file
Carlos Andres Cardenas BalagueraCarlos Andres Cardenas Balaguera
Carlos Andres Cardenas Balaguera
MBMaryory Astrid Gómez Botero
Maryory Astrid Gómez Botero
Phosphate cements originated more than a century ago for specific applications to the field of dentistry. These cements have other applications including: biomaterials with bone applications, stabilization of hazardous waste, and structural cements. However, the applications in civil infrastructure are recent and not widely known. Therefore, this review discusses and analyzes phosphate cements, presenting the most significant findings of the research to address their mechanical behavior of these cements. It also describes the impact and application of phosphate cements as a structural product (pastes, mortars and concretes), in addition to typical values of mechanical strength, workability, commercial applications, etc. As a result, the review allows to elucidate advantages and disadvantages in comparison with existing technologies and the mechanical possibilities of these cements as biomaterials and for the immobilization of radioactive waste.

1 November 2021 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
PDF file
Carlos Andres Cardenas BalagueraCarlos Andres Cardenas Balaguera
Carlos Andres Cardenas Balaguera
PMPetra Mácová
Petra Mácová
MBMaryory Astrid Gómez Botero
Maryory Astrid Gómez Botero
LZLucie Zárybnická
Lucie Zárybnická
RŠRadek Ševčík
Radek Ševčík
AVAlberto Viani
Alberto Viani
The process of obtaining chemically bonded phosphate ceramics generally involves the use of metallic oxides, the preparation of which consumes high quantities of energy. The present study proposes a method to recycle slags generated by a steel production process that is widely used across the world—the electric arc furnace. A chemically bonded phosphate ceramic is produced by exploiting the high content of metals present in the slag, realizing the conditions to mitigate the environmental impact of the industrial by-product. In situ infrared spectroscopy, isothermal conduction calorimetry, and X-ray diffraction revealed that the setting reaction involves the formation of amorphous products in the form of metallic phosphate hydrates and a fraction of calcium silicate hydrates similar to those found in portland cement. This phosphate matrix allows the effective immobilization of heavy metals in the slag, such as Cr and As. According to the results of mechanical tests, which showed compression resistance of 15–25  MPa , and leaching tests, slag-based phosphate cement can be used without restrictions as a construction material for applications such as mortars or bricks.

24 December 2020 in Journal of Sustainable Cement-Based Materials
Verified
Journal Article
Closed access
Carlos Andres Cardenas BalagueraCarlos Andres Cardenas Balaguera
Carlos Andres Cardenas Balaguera
MBMaryory Astrid Gómez Botero
Maryory Astrid Gómez Botero
The use of industrial waste in the synthesis of phosphate ceramics opens the door to new ways of production and marketing of this kind of product, as well as contributing to the reduction of the environmental impact of industrial waste. In the present study, chemically bonded phosphate ceramics (CBPC) were synthesized from steel slags (electric arc furnace slag (EAF), basic oxygen furnace slag (BOF), and ladle furnace basic slag (LF) and aqueous solutions of H3PO4. A chemical analysis was performed of the steel slags, which were selected through standard sampling before being ground and milled to obtain the appropriate granulometry. In the evaluated slags, iron oxides and calcium oxides, present both in their free state and in compounds with other elements, were identified as the elements with the greatest presence and potential to form CBPC. Design of experiments (DOE) was applied to form multiphase cements, in order to make the variables present in the obtainment of cements workable, thereby allowing the formation reactions of cement to be better understood. The cements obtained were analyzed through XRD, SEM-EDS, FTIR, XPS, and mechanical compressive strength tests. The synthesized cement exhibited mainly vitreous structure for the iron phosphate phases (Fe(H2PO4)2) or (FeHPO4), and mainly crystalline structure for the calcium phosphate phases, present as dihydrogen phosphate of calcium hydrate (Ca(H2PO4)2·xH2O) and brushite (CaHPO4·2H2O). Compression strength between 10 and 19 MPa was recorded for the different compositions evaluated, with short setting times.

1 October 2026 in Ceramics
Verified
Journal Article
Open access
PDF file
Carlos Andres Cardenas BalagueraCarlos Andres Cardenas Balaguera
Carlos Andres Cardenas Balaguera
CGClara Isabel López Gualdron
Clara Isabel López Gualdron
This study evaluates the technological potential of raw clays from the Chicamocha Canyon basin (Santander, Colombia), a region shaped by prolonged geological erosion. The research focuses on the Barichara sector, where clay deposits are stratigraphically associated with the Cretaceous Simití Formation. Three local clay varieties were investigated: Arcilla Fina (AF), Arcilla Cascajo (CA), and Arcilla Arenosa (TA). Characterization included the determination of physical-mechanical properties, particle size distribution via wet sieving and hydrometer sedimentation, Atterberg consistency limits, and chemical-mineralogical analyses using X-ray fluorescence (XRF) and X-ray diffraction (XRD). Test specimens were shaped and sintered at 1080 °C. The results indicate that all samples share a common mineralogical assemblage dominated by kaolinite, quartz, and muscovite, albeit with distinct quantitative proportions. Notably, the CA clay exhibited the highest kaolinite content, high plasticity, and a highly vitrified microstructure upon firing, achieving the highest compressive strength (17.31 MPa). Based on these technological performance metrics, CA clay is suitable for structural brick manufacturing and slip casting; AF clay is optimized for industrial stiff-extrusion processes; and TA clay is well-suited for earthen architecture applications. Finally, the formulation of tailored clay blends is proposed for future studies to optimize these functional properties.

24 March 2026 in Ceramics
Verified
Journal Article
Open access
PDF file
Carlos Andres Cardenas BalagueraCarlos Andres Cardenas Balaguera
Carlos Andres Cardenas Balaguera
Andres RubianoAndres Rubiano
Andres Rubiano
PCPilar Astrid Ramos Casas
Pilar Astrid Ramos Casas
LLLina Paola Espitia López
Lina Paola Espitia López
The research focuses on the development of chemically bonded phosphate ceramics using potassium hydrophosphate and steel slag (EAF) as raw materials. The objective is to scale up the laboratory results to design a ceramic paste suitable for architectural monolithic products, promoting the recycling of EAF steel slag. The methodology includes field visits, grinding and sieving of raw materials, and the fabrication of specimens following ASTM standards. The laboratory results from existing studies on multiphase phosphate cements from steel slags indicate that exothermic reactions and the increase in reactants can affect process scaling. Furthermore, shaping methods such as casting and pressing are evaluated, where pressing proves to be the most suitable for this type of phosphate cement as it increases the material’s mechanical properties (compressive strength), reduces porosity, and generates a greater utilization of the EAF steel slag residue. Taking into account Colombian technical standards regarding the minimum compressive strength that a monolithic architectural object must withstand for structural and non-structural use, the results obtained in this research allow us to conclude that this material can indeed be used for architectural purposes.