Chemseddine BENKALFATE

Dr. Chemseddine BENKALFATE

École Nationale Supérieure de l'Électronique et de ses Applications, Cergy, Île-de-France, France
+1
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Chemseddine BENKALFATEChemseddine BENKALFATE
Chemseddine BENKALFATE
AOAchour Ouslimani
Achour Ouslimani
AKAbed-Elhak Kasbari
Abed-Elhak Kasbari
FMFeham Mohammed
Feham Mohammed
In this paper, a new RF Energy Harvesting (RF-EH) system for Wireless Sensor Network (WSN) feeding is proposed. It is based on two different monitored architectures using switch circuits controlled by the input powers. One architecture is more adapted to high input powers and the other to low input powers. The two different architectures and the system are designed and realized on Teflon glass substrate with a relative permittivity of 2.1 and thickness of 0.67 mm. They are tested separately as a function of the distance from the relay antenna. A new multiband antenna with a size of 40 × 30 mm2 is used for both architectures and the system. The measured antenna gains are 2.7 dB, 2.9 dB, and 2.55 dB for the frequencies of 1.8 GHz, 2.1 GHz, and 2.66 GHz corresponding to the mobile communication networks, respectively. The rectifier consists of two Schottky diodes forming a full-wave rectifier and voltage doubler. The maximum measured RF-to-DC conversion efficiency is 71.5%. The proposed RF-EH system provides a maximum DC output voltage of 5.6 V and 3.15 V for an open and 2 kΩ resistance load, respectively.

20 October 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Chemseddine BENKALFATEChemseddine BENKALFATE
Chemseddine BENKALFATE
AOAchour Ouslimani
Achour Ouslimani
AKAbed-Elhak Kasbari
Abed-Elhak Kasbari
FMFeham Mohammed
Feham Mohammed
This work proposes a new compact triple-band triangular patch antenna for RF energy harvesting applications in IoT devices. It is realized on Teflon glass substrate with a thickness of 0.67 mm and a relative permittivity of 2.1. Four versions of this antenna have been designed and realized with inclinations of 0°, 30°, 60° and 90° to study the impact of the tilting on their characteristics (S11 parameter, radiation pattern, gain) and to explore the possibilities of their implementation in the architectures of electronic equipment according to the available space. The antenna is also realized on waterproof paper with a thickness of 0.1 mm and a relative permittivity of 1.4 for biomedical domain. All the antennas (vertical antenna, tilted antennas and antenna realized on waterproof paper) have a size of 39 × 9 mm2 and cover the 2.45 GHz and 5.2 GHz Wi-Fi bands and the 8.2 GHz band. A good agreement is obtained between measured and simulated results. Radiation patterns show that all the antennas are omnidirectional for 2.45 GHz and pseudo-omnidirectional for 5.2 GHz and 8.2 GHz with maximum measured gains of 2.6 dBi, 4.55 dBi and 6 dBi, respectively. The maximum measured radiation efficiencies for the three antenna configurations are, respectively, of 75%, 70% and 72%. The Specific Absorption Rate (SAR) for the antenna bound on the human body is of 1.1 W/kg, 0.71 W/kg and 0.45 W/kg, respectively, for the three frequencies 2.45 GHz, 5.2 GHz and 8.2 GHz. All these antennas are then applied to realize RF energy harvesting systems. These systems are designed, realized and tested for the frequency 2.45 GHz, −20 dBm input power and 2 kΩ resistance load. The maximum measured output DC power is of 7.68 µW with a maximum RF-to-DC conversion efficiency of 77%.

1 June 2019
Verified
Conference Paper
Closed access
Chemseddine BENKALFATEChemseddine BENKALFATE
Chemseddine BENKALFATE
MFMohammed Feham
Mohammed Feham
AOAchour Ouslimani
Achour Ouslimani
AKAbdelhak Kasbari
Abdelhak Kasbari
This paper presents the design and the realization of an antenna and a rectifier circuit for RF and microwave energy harvester. Our study is focused on the analysis of the antenna response and the suitable rectifier circuit for capturing the set RF power, from wireless and mobile communication networks, operational in the frequency band (0.890 – 4) GHz. The used antenna, gives a measure efficiency of around 95% within the previous bandwidth, and the proposed rectifier circuit present a simulated RF - DC conversion efficiency of almost 92% at −75dBm, and the measured one is equal nearly to 60% at −30dBm. The simulation sensitivity of this rectifier circuit is very low, a 5V output voltage is detected at −80dBm RF input power, and the practical sensitivity of this circuit is getting when 1V output voltage is detected at −25dBm input power. Both antenna and rectifier have been fabricated and tested.

15 November 2021
Verified
Conference Paper
Closed access
Chemseddine BENKALFATEChemseddine BENKALFATE
Chemseddine BENKALFATE
AOAchour Ouslimani
Achour Ouslimani
AKAbed-Elhak Kasbari
Abed-Elhak Kasbari
MFMohammed Feham
Mohammed Feham
BDBruno Delacressonniere
Bruno Delacressonniere
In this paper, a new compact size dual port patch antenna is realized on Teflon glass substrate with a size of 30x15mm 2 for RF energy harvesting system in order to feed two motion sensors with a scan aperture of 180° for each one, resulting in an energy autonomous sensor system with a total scan aperture of 360°. The proposed antenna is adapted to the 5.8GHz ISM band, with a measured return loss of -30dB and 25dB for the 1 st and 2 end ports respectively. The measured frequency bandwidths are of 2.3GHz for the 1 st port, ranging from 4.7GHz to 7GHz, and of 1.2GHz for the 2 end port, ranging from 5GHz to 6.2GHz. The measured isolation $S_{12/21}$ is of -25 dB in all the frequency bandwidth. The radiation pattern of this antenna is close to that of an omnidirectional one which is suitable to RF energy harvesting applications.