Co₆Al₂HT hydrotalcite-like compounds were synthesized by three different methods: co-precipitation, microwaves-assisted and ultrasound-assisted methods. The mixed oxides obtained after calcination were studied by several techniques: XRD, TEM, H₂-TPR and XPS. They were also tested as catalysts in the reaction of total oxidation of toluene. The physico-chemical studies revealed a modification of the structural characteristics (surface area, morphology) as well as of the reducibility of the formed mixed oxides. The solid prepared by microwaves-assisted synthesis was the most active. Furthermore, a relationship between the ratio of Co²⁺ on the surface, the reducibility of the Co-Al mixed oxide and the T₅₀ in toluene oxidation was demonstrated. This suggests a Mars Van Krevelen mechanism for toluene total oxidation on these catalysts.

Catalytic total oxidation is an efficient technique for treating VOCs, which are mainly emitted by solvent-based industrial processes. However, studies of the catalytic oxidation of VOCs in combination with other pollutants are very limited, despite the fact that this is a key step of knowledge before industrial application. During the oxidation reaction, the behavior of a molecule may change depending on the reaction mixture. For the treatment of an effluent loaded with VOCs, it is necessary to carefully select not only the catalytic material to be used but also the reaction conditions. Indeed, the catalytic oxidation of a component in a VOCs mixture is not predicted solely from the behavior of individual component. Thus, the objective of this small review is to carry out a study on the effect observed in the case of the oxidation of a VOCs mixture or in the presence of water, NO_X or sulfur compounds.

Catalytic total oxidation is an effective technique for the treatment of industrial VOCs principally resulting from industrial processes using solvents, and usually containing mono-aromatics (BTEX) and oxygenated compounds (acetone, ethanol, butanone). The catalytic total oxidation of VOCs on noble metal materials is effective. However, the cost of catalysts is a main obstacle for the industrial application of these VOC removal processes. Therefore, the aim of this work is to propose an alternative material to palladium-based catalysts (which are suitable for VOCs’ total oxidation): a mixed oxide synthesized in the hydrotalcite way, namely CoAlCeO. This material was compared to four catalytic materials containing palladium, selected according to the literature: Pd/α-Al₂O₃, Pd/HY, Pd/CeO₂ and Pd/γ­Al₂O₃. These materials have been studied for the total oxidation of toluene, butanone, and VOCs mixtures. Catalysts’ performances were compared, taking into account the oxidation byproducts emitted from the process. This work highlight that the CoAlCeO catalyst presents better efficiency than Pd-based materials for the total oxidation of a VOCs mixture.