Crescenzo Pepe

Dr. Crescenzo Pepe

Marche Polytechnic University, Ancona, Marche, Italy
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2017 in Journal of Control Science and Engineering
Verified
Journal Article
Open access
PDF file
Silvia Maria ZANOLISilvia Maria ZANOLI
Silvia Maria ZANOLI
Crescenzo PepeCrescenzo Pepe
Crescenzo Pepe
In this paper, the problem of the control and optimization of a walking beam billets reheating furnace located in an Italian steel plant is analyzed. An ad hoc Advanced Process Control framework has been developed, based on a two-layer linear Model Predictive Control architecture. This control block optimizes the steady and transient states of the considered process. Two main problems have been addressed. First, in order to manage all process conditions, a tailored module defines the process variables set to be included in the control problem. In particular, a unified approach for the selection on the control inputs to be used for control objectives related to the process outputs is guaranteed. The impact of the proposed method on the controller formulation is also detailed. Second, an innovative mathematical approach for stoichiometric ratios constraints handling has been proposed, together with their introduction in the controller optimization problems. The designed control system has been installed on a real plant, replacing operators’ mental model in the conduction of local PID controllers. After two years from the first startup, a strong energy efficiency improvement has been observed.

3 March 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Silvia Maria ZANOLISilvia Maria ZANOLI
Silvia Maria ZANOLI
Crescenzo PepeCrescenzo Pepe
Crescenzo Pepe
GAGiacomo Astolfi
Giacomo Astolfi
The cement industry includes energy-intensive processes, e.g., clinker rotary kilns and clinker grate coolers. Clinker is obtained through chemical and physical reactions in a rotary kiln from raw meal; these reactions also involve combustion processes. The grate cooler is located downstream of the clinker rotary kiln with the purpose of suitably cooling the clinker. The clinker is cooled through the action of multiple cold air fan units as it is transported within the grate cooler. The present work describes a project where Advanced Process Control techniques are applied to a clinker rotary kiln and a clinker grate cooler. Model Predictive Control was selected as the main control strategy. Linear models with delays are obtained through ad hoc plant experiments and suitably included in the controllers’ formulation. A cooperation and coordination policy is introduced between the kiln and the cooler controllers. The main objectives of the controllers are to control the rotary kiln and grate cooler critical process variables while minimizing the fuel/coal specific consumption of the kiln and the electric energy consumption of the cold air fan units within the cooler. The overall control system was installed on the real plant, obtaining significant results in terms of service factor and control and energy-saving performances.

10 January 2023 in Processes
Verified
Journal Article
Open access
PDF file
Silvia Maria ZANOLISilvia Maria ZANOLI
Silvia Maria ZANOLI
Crescenzo PepeCrescenzo Pepe
Crescenzo Pepe
The present work proposes a simulation and control framework for home and building automation, focusing on heating, ventilating, and air conditioning processes. Control systems based on different advanced control architectures and different control policies are simulated and compared, highlighting control performances, and energy-saving results in terms of CO2 emissions reduction. Heat, lighting, and natural ventilation phenomena were modelized through first-principles and empirical equations, obtaining a reliable and flexible simulation framework. Energy-consuming and green energy-supplying renewable sources were integrated into the framework, e.g., heat pumps, artificial lights, fresh air flow, and natural illuminance. Different control schemes are proposed, based on proportional–integral–derivative advanced control architectures and discrete event dynamic systems-based supervisors; different control specifications are included, resulting in a multi-mode control system. The specifications refer to energy savings and comfort management, while minimizing overall costs. Comfort specifications include thermal comfort, lighting comfort, and a good level of indoor air quality. Simulations on different scenarios considering various control schemes and specifications show the reliability and soundness of the simulation and control framework. The simulated control and energy performances show the potential of the proposed approach, which can provide energy-saving results greater or equal to 6 [%] (in each season) and 19 [%] (in one year) with respect to more standard approaches.

13 April 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Silvia Maria ZANOLISilvia Maria ZANOLI
Silvia Maria ZANOLI
Crescenzo PepeCrescenzo Pepe
Crescenzo Pepe
LOLorenzo Orlietti
Lorenzo Orlietti
In this paper, a unified level 2 Advanced Process Control system for steel billets reheating furnaces is proposed. The system is capable of managing all process conditions that can occur in different types of furnaces, e.g., walking beam and pusher type. A multi-mode Model Predictive Control approach is proposed together with a virtual sensor and a control mode selector. The virtual sensor provides billet tracking, together with updated process and billet information; the control mode selector module defines online the best control mode to be applied. The control mode selector uses a tailored activation matrix and, in each control mode, a different subset of controlled variables and specifications are considered. All furnace conditions (production, planned/unplanned shutdowns/downtimes, and restarts) are managed and optimized. The reliability of the proposed approach is proven by the different installations in various European steel industries. Significant energy efficiency and process control results were obtained after the commissioning of the designed system on the real plants, replacing operators’ manual conduction and/or previous level 2 systems control.

19 November 2015 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
Silvia Maria ZANOLISilvia Maria ZANOLI
Silvia Maria ZANOLI
Crescenzo PepeCrescenzo Pepe
Crescenzo Pepe
LBL Barboni
L Barboni
In this paper an Advanced Process Control system aimed at controlling and optimizing a pusher type reheating furnace located in an Italian steel plant is proposed. The designed controller replaced the previous control system, based on PID controllers manually conducted by process operators. A two-layer Model Predictive Control architecture has been adopted that, exploiting a chemical, physical and economic modelling of the process, overcomes the limitations of plant operators' mental model and knowledge. In addition, an ad hoc decoupling strategy has been implemented, allowing the selection of the manipulated variables to be used for the control of each single process variable. Finally, in order to improve the system flexibility and resilience, the controller has been equipped with a supervision module. A profitable trade-off between conflicting specifications, e.g. safety, quality and production constraints, energy saving and pollution impact, has been guaranteed. Simulation tests and real plant results demonstrated the soundness and the reliability of the proposed system.

27 September 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Silvia Maria ZANOLISilvia Maria ZANOLI
Silvia Maria ZANOLI
Crescenzo PepeCrescenzo Pepe
Crescenzo Pepe
EMElena Moscoloni
Elena Moscoloni
GAGiacomo Astolfi
Giacomo Astolfi
This study proposes a data analysis and modelization method for the rolling mill process of billets in steel plants. By exploiting rolling mill signals and advanced data processing algorithms, a reliable billet tracking system is designed, which tracks each workpiece from the furnace entrance to the rolling mill stands’ exit area. Based on the stored information, two problems are addressed: the data analysis of the temperature sensors (a thermal imaging camera and pyrometers) and the current that is related to the rolling mill stands’ absorption, and subsequently, a mathematical modelization of the billets’ temperature along their path in the rolling mill is produced. The data analysis suggested that we should perform hardware modifications: the thermal imaging camera was repositioned to avoid the effect of scale formation on the temperature measurements. The modelization phase provided the basis for future control and/or diagnosis applications that will exploit a temperature decay model.