In this work, thermoplastic polyurethane (TPU) composites incorporated with 1.0 wt% Cu particles were synthesized by the melt blending method. The effect of the incorporated copper particle size on the antibacterial, thermal, rheological, and mechanical properties of TPU was investigated. The obtained results showed that (i) the addition of copper particles increased the thermal and mechanical properties because they acted as co-stabilizers of polyurethane (PU) (ii) copper nanoparticles decreased the viscosity of composite melts, and (iii) microparticles > 0.5 µm had a tendency to easily increase the maximum torque and formation of agglomerates. SEM micrographics showed that a good mixture between TPU and copper particles was obtained by the extrusion process. Additionally, copper-TPU composite materials effectively inhibited the growth of the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus. Considering that the natural concentration of copper in the blood is in the range of 0.7–0.12 mg/L and that the total migration value of copper particles from TPU was 1000 times lower, the results suggested that TPU nanocomposites could be adequately employed for biomedical applications without a risk of contamination.
The global proliferation of Pinus radiata, known for its rapid growth and wood density, has led to an environmental challenge—significant waste production, especially bark, without a clear valorization route. This waste poses ecological concerns, and despite the crucial role of forest resources in structural applications, their limited fire resistance requires the use of coatings. However, traditional coatings lack an eco-friendly footprint. Addressing this challenge, this study aims to develop an intumescent coating with tannins extracted from waste bark, offering a sustainable alternative. This not only repurposes waste on a global scale but also aligns with the imperative for environmentally friendly materials, contributing to sustainable practices in the construction and wood treatment industry. This study achieved an eco-friendly FRR15 (fire resistance ratio 15) fire resistance classification with a 15% equivalence of low-molecular-weight tannins, presenting a sustainable alternative to commercial products. Characterization showed low-molecular-weight tannins comparable to conventional charring agents, with high hydroxyl content and oil absorption, while high-molecular-weight tannins exhibited lower viability. A reference coating achieved FRR30 fire resistance, aligning with commercial strength. The mechanical properties of tannin-based coatings matched commercial standards, with increased abrasion resistance and adhesion and decreased flexibility. Intumescent coatings with higher tannin content significantly reduced wood substrate charring and mass loss in flame response assessments.
The development of multifunctional biodegradable materials with improved structural performance and antimicrobial functionality is essential for advancing sustainable packaging. This study evaluates the effect of copper-modified ZSM-5 zeolite (ZCu) concentration (0, 1, and 5 wt%) on thermoplastic starch/polylactic acid (TPS/PLA) blends. The TPS was derived from Ipomoea batatas (sweet potato, SP) and Dioscorea rotundata (diamond yam, DY) starches and compatibilized with 1 wt% citric acid. The ZCu response depended on both ZCu loading and the botanical starch source. Structural analyses showed that SP-based composites reached their highest crystallinity at 1 wt% ZCu (13.70%), whereas DY-based systems exhibited an initial decrease at 1 wt% followed by an increase to 12.75% at 5 wt%, reflecting distinct concentration-dependent crystallization trends. Thermal analyses demonstrated a substantial increase in the degradation onset temperature of SP-based composites, from 132.9 °C to 185.1 °C at 1 wt% ZCu, indicating an effective thermal barrier effect. Nanomechanical mapping revealed concentration- and starch-source-dependent changes in local hardness, reduced modulus, and elastic recovery, without evidence of uniform mechanical reinforcement across all formulations. Antibacterial activity was observed exclusively in composites containing 5 wt% ZCu, with inhibition zones of 5.3 mm against Staphylococcus aureus and 1.0 mm against Escherichia coli. These findings highlight how the structural, thermal, nanomechanical and antimicrobial responses of TPS/PLA blends vary with ZCu concentration and the botanical origin of the starch.