Cristina Budaciu

Prof. Cristina Budaciu

Gheorghe Asachi Technical University Iasi, Romania
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2019
Verified
Conference Paper
Closed access
Cristina BudaciuCristina Budaciu
Cristina Budaciu
NBNicolae Botezatu
Nicolae Botezatu
MKMarius Kloetzer
Marius Kloetzer
Adrian BurlacuAdrian Burlacu
Adrian Burlacu
In recent years, quadcopters have become popular research platforms in the fields of robotics and control engineering. As a response to the academic community’s needs, several open-source hardware and software platforms have emerged with the aim to impose as de-facto development tools. One of these platforms is represented by Crazyflie 2.0, a nano class quadcopter that was used in research projects that span from control architecture designs to high-level swarm synchronization.This paper presents a study of the control architecture employed in the stock firmware. Based on the mathematical model, the dynamic behaviour is thoroughly evaluated to understand the deviation between ideal and real evolution. A comprehensive phase of parameters tuning is conducted and multiple scenarios for real-time testing are employed. These scenarios comply in tracking predefined patterns, the quadcopter’s evolution being tracked via a RGB-D sensor.The proposed evaluation procedure can be easily replicated and represents a very important step in obtaining accurate real-time results.

30 May 2021 in Symmetry
Verified
Journal Article
Open access
PDF file
CDCatalin Dosoftei
Catalin Dosoftei
APAlexandru-Tudor Popovici
Alexandru-Tudor Popovici
PSPetru-Razvan Sacaleanu
Petru-Razvan Sacaleanu
PGPaul-Marcelin Gherghel
Paul-Marcelin Gherghel
Cristina BudaciuCristina Budaciu
Cristina Budaciu
The symmetry of the omnidirectional robot motion abilities around its central vertical axis is an important advantage regarding its driveability for the flexible interoperation with fixed conveyor systems. The paper illustrates a Hardware in the Loop architectural approach for integrated development of an Ominidirectional Mobile Robot that is designed to serve in a dynamic logistic environment. Such logistic environments require complex algorithms for autonomous navigation between different warehouse locations, that can be efficiently developed using Robot Operating System nodes. Implementing path planning nodes benefits from using Matlab-Simulink, which provides a large selection of algorithms that are easily integrated and customized. The proposed solution is deployed for validation on a NVIDIA Jetson Nano, the embedded computer hosted locally on the robot, that runs the autonomous navigation software. The proposed solution permits the live connection to the omnidirectional prototype platform, allowing to deploy algorithms and acquire data for debugging the location, path planning and the mapping information during real time autonomous navigation experiments, very useful in validating different strategies.

8 November 2022 in Sensors
Verified
Journal Article
Open access
PDF file
APAlexandru-Tudor Popovici
Alexandru-Tudor Popovici
CDCatalin Dosoftei
Catalin Dosoftei
Cristina BudaciuCristina Budaciu
Cristina Budaciu
Monitoring and tracking issues related to autonomous mobile robots are currently intensively debated in order to ensure a more fluent functionality in supply chain management. The interest arises from both theoretical and practical concerns about providing accurate information about the current and past position of systems involved in the logistics chain, based on specialized sensors and Global Positioning System (GPS). The localization demands are more challenging as the need to monitor the autonomous robot’s ongoing activities is more stringent indoors and benefit from accurate motion response, which requires calibration. This practical research study proposes an extended calibration approach for improving Omnidirectional Mobile Robot (OMR) motion response in the context of mechanical build imperfections (misalignment). A precise indoor positioning system is required to obtain accurate data for calculating the calibration parameters and validating the implementation response. An ultrasound-based commercial solution was considered for tracking the OMR, but the practical observed errors of the readily available position solutions requires special processing of the raw acquired measurements. The approach uses a multilateration technique based on the point-to-point distances measured between the mobile ultrasound beacon and a current subset of fixed (reference) beacons, in order to obtain an improved position estimation characterized by a confidence coefficient. Therefore, the proposed method managed to reduce the motion error by up to seven-times. Reference trajectories were generated, and robot motion response accuracy was evaluated using a Robot Operating System (ROS) node developed in Matlab-Simulink that was wireless interconnected with the other ROS nodes hosted on the robot navigation controller.

1 September 2019
Verified
Conference Paper
Closed access
LTLaura Tudose
Laura Tudose
Cristina BudaciuCristina Budaciu
Cristina Budaciu
This paper is meant to present the studying process and implementation of a bio-inspired four-winged flying butterfly robot. The prototype contains two servomotors that control the wings movement, a Bluetooth communication, an Inertial Measurement Unit (IMU MPU-9250) which contains a gyroscope, an accelerometer and a magnetometer, one development board and the insect body. First part of the study is dedicated to the butterfly body construction. In this regard, several prototypes, which differed in size, shape, weight and materials have been developed and analyzed. These artificial butterflies offer an overview of the dynamic of the insect, the wing motion and control for stable flight encourage to further developments of the system. The communication with the butterfly robot was realized by taking advantages of the Matlab software benefits. It is used to send commands to the robot over Bluetooth and the results can be analyzed through system data acquisition. The contribution can be also considered as a reference guide for those who want to create their own butterfly robot and to analyze its dynamics.

1 October 2017
Verified
Conference Paper
Closed access
GBGeorgiana Brateanu-Ungureanu
Georgiana Brateanu-Ungureanu
APAndrei Prepelita
Andrei Prepelita
Cristina BudaciuCristina Budaciu
Cristina Budaciu
Two wheel balancing robot referred as inverted pendulum is analyzed and implemented using Lego Mindstorms kit. The mathematical model was derived based on inverted pendulum equations with real parameters values appropriate to the real robot. The linearized state space mathematical model was converted into δ-domain counterpart due to the advantages of discrete time δ-operator in the context of finite word length representation. The most important factors which have a decisive importance are the sampling period and the numerical integration technique. LQR controller is proposed in order to stabilize the self-balancing two-wheeled robot. This control strategy optimally balances the error and control effort based on a cost function. Implementation of the constrained LQ on a real inexpensive hardware with very fast dynamic justifies this control approach and δ-domain discretization method which is numerically more stable.

1 September 2011
Verified
Conference Paper
Closed access
Cristina BudaciuCristina Budaciu
Cristina Budaciu
ABAndreea E. Balau
Andreea E. Balau
LCLazar Corneliu
Lazar Corneliu
Driveability, the ability to quickly respond to drivers action and a high degree of driving comfort is expected in a modern vehicle. Predictive control strategy in the discrete δ domain, in particular State Space δ GPC algorithm, reffered as SS δ GPC can bring significant improvements in terms of choosing a small sampling period. Moreover, this study is particularly relevant for implementation of control design on embedded systems, where the representation can be restricted to a finite number of bits. A δ state space affine model of automotive transmission system is used in order to illustrate the performances of the GPC design in the δ domain. The SS δ GPC is demonstrated to improve on the system response when it is compared with classical GPC using shift operator.