The influence of wettability on the morphology of droplet impacts onto dry surfaces is often neglected in the literature, despite its significant effect on the resulting morphology. In this work, the role of wettability is investigated systematically by considering droplet impact processes on smooth dry surfaces of two different materials. The wetting behavior is varied not only by employing two different fluids, but most importantly by varying the surface properties by plasma activation and polymerization. Overall, this leads to four different wetting behaviors for each surface. The changes in impact morphology are visualized by means of a three-perspective experimental facility. In particular, the bottom view employs a total internal reflection-configuration for visualizing the exact droplet contact area and contact time. This enables us to characterize the main features of the different wetting behaviors. Overall, we found that surface wettability mainly influences the receding phase, resulting in higher receding rates with decreasing wettability but also the maximum spreading diameter.
The influence of surface roughness, especially regularly patterned micro-structures on the physical outcomes of droplet impacts, is far from fully understood. In order to get a deeper insight into the physics of the impact phenomena, a systematic experimental study of the morphology on regularly patterned micro-structured surfaces has been carried out. The used structures with different dimensions were grooves and pillars with a square cross section. With the help of plasma activation and plasma polymerization processes, the surface wettability was modified independently from the surface structure and material. Two different test fluids were used, namely, distilled water and isopropanol, impacting with various impact energies onto the patterned surface samples. For a better characterization of the impact process, high-speed images from three different perspectives have been acquired synchronously. Due to the transparent surface material, the bottom perspective using a total internal reflection configuration was able to visualize air entrapment inside the surface structure. To the authors' knowledge, such images are not available in the literature, yet. The outcomes have been qualitatively investigated, summarized, and compared. A dependency of the outcomes on the impact energy, the surface wettability, and the structure dimensions could be clearly shown. In general, increasing impact energy will promote the tendency of splashing. However, roughness features cannot only trigger splashing, but can also inhibit it, for example, crown splashing. Moreover, reproducible arrangements of air entrapment inside the structure could be found, which was addressed by the authors as “cookie” and “button” due to their appearance.
In aero-engines, the introduction of biofuels is among the best alternatives to fossil fuels, and this change is likely to affect the impact of droplets on interposed surfaces. Under this framework, this work reviews the main morphological hydrodynamic structures occurring upon the impact of a liquid droplet on a wetted surface, using jet fuel and biofuel mixtures as alternative fuels. The experiments performed allow investigating the effect of the liquid film thickness on the dynamic behavior of single drop impact, considering the relevancy of these phenomena to the optimization of engine operating parameters. Particular emphasis is given to the occurrence of crown splash, and the morphological differences in the outcomes of drop impact depending on the impact conditions and fluid properties. The four fluids tested included pure water (as reference), 100% Jet A-1, 75%/25%, and 50%/50% mixtures of Jet A-1 and NExBTL (Neste Renewable Diesel)—with the Weber impact number between 103 and 1625; Reynolds values 1411–16,889; and dimensionless film thicknesses of δ = 0.1, 0.5, and 1. The analysis on the secondary atomization for the different fluids evidences the predominance of prompt and crown splash, and jetting for alternative fuels. Finally, besides a systematic review of empirical correlations for the transition to splash, we investigate their universality by extrapolating the validation range to evaluate their ability to predict the outcome of impact accurately. One of the correlations studied show the highest degree of universality for the current experimental conditions, despite its limitation to thin liquid films ().
30 March 2023 in International Journal of Multiphase Flow
The phenomenon of bubble encapsulation results from droplet impact on a liquid film for specific impact conditions, but there is no established criterion for predicting its onset. Phenomenon visualization from two perspectives, the common lateral perspective and a bottom perspective, provided insights into the dynamics and formation mechanisms. Namely, the bottom shadowgraphs show capillary wavy patterns and perturbations imposed on the steady liquid film, which suggests a greater role of the liquid film in the onset of bubble encapsulation. Also, some considerations about the cavity development underneath the bubble limited by the solid wall allow concluding that the cavity shape is independent of the bubble encapsulation phenomenon. Additionally, using the bottom shadowgraphs, the crown closure time shows a systematic decrease in the dimensionless film thickness of , which will be subject of future work. Finally, while most drop impact correlations focus on using the droplets' characteristics and thermophysical properties, the experimental results point in a different direction. Considering correlations relating the Ohnesorge and Reynolds numbers, the new criterion for the onset of bubble encapsulation uses drop characteristics and properties in the Reynolds number, while the liquid film thickness and thermophysical properties are used in the Ohnesorge number because most of the crown material comes from the liquid film. Therefore, the criterion based on 100% occurrence of bubble encapsulation is not a threshold, but a range: , with . Other authors observed this phenomenon and despite being outside the validation range of this correlation, the values are close to their boundaries.