Multi-motor electric drives are widely used in many industries due to increased reliability, weight and size, and other parameters. One of the drawbacks of multi-motor electric drives is non-uniform load distribution. The reason lies in disorder in parameters of the motors of the same catalog data. Determination of uneven load distribution and load balancing between the motor is considered in this paper. The analysis of mechanical characteristics obtained of the two motors is performed. The variants of load balancing by changing the frequency and voltage amplitude is considered. The paper deals with a simulation model which allow to investigate the two motor electric drive with a single load. The results of research in the form of transient responses with introduced adjustments at different frequency and voltage are also given herein. Studies have shown that in the process of adjustment the frequency and voltage must be changed depending on the magnitude of the load torque of electric drive. The method of load balancing can be applied to induction motors which have the same number of pole pairs.
The present work focuses on the development of control systems of wind-diesel power plant with DC-bus, which provide generation static stability for a given operation conditions. The article describes the operating modes of generating units and conversion devices, by which the maximum power output and static stability of the wind-diesel system are realized. Independent controllers setting for each generation source is proposed, making possible a modular extension of the hybrid power plant. The controllers are tuned for wind and diesel generation sources. Two optimization methods are used: linear and modular. By quality indicators analysis of the transients and logarithmic frequency responses the optimal structure and parameters of the regulators are selected. The regulators developed are implemented and used for existing power equipment. The control systems test experimental data obtained confirm the adequacy, reliability and performance of the developed solutions.
Intelligent information technology (IIT) for the purpose of education within the blended learning paradigm is discussed. The technology is based on the construction of mixed diagnostic tests (MDTs) used for decision-making. Each MDT represents a compromise between unconditional and conditional components. The cognitive graphic tools are used as IIT...
The paper deals with the development of the dynamic model of wind by modeling the longitudinal component of wind speed. Statistical description of turbulent wind component using Kaimal’s function is represented. All necessary parameters for model performing are calculated. The results of modeling in the form of dynamic characteristics are presented.
Boosted interest in highly efficient power supplies based on renewables requires involving simulators during both the designing stage and the testing one. It is especially relevant for the power supplies that operate in the harsh environmental conditions of northern territories and alike. Modern solar panels based on polycrystalline Si and GaAs possess relatively high efficiency and energy output. To save designing time and cost, system developers use simulators for the solar panels coupled with the power converters that stabilize the output parameters and ensure the proper output power quality to supply autonomous objects: namely, private houses, small-power (up to 10 kW) industrial buildings, submersible pumps, and other equipment. It is crucial for the simulator to provide a valid solar panel I-V curve in various modes and under different ambient conditions: namely, the consumed power rating, temperature, solar irradiation, etc. This paper considers a solar panel simulator topology representing one of the state-of-the-art solutions. This solution is based on principles of classical control theory involving a pulse buck converter as an object of control. A mathematical model of the converter was developed. Its realization in MATLAB/Simulink confirmed the adequacy and applicability of both discrete and continuous forms of the model during the design stage. Families of I-V curves for a commercially available solar panel within the temperature range from to +25 C were simulated on the model. A prototype of the designed simulator has shown its correspondence to the model in Simulink. The developed simulator allows providing a full-scale simulation of solar panels in various operating modes with the maximum value of the open circuit voltage 60 V and that of the short circuit current 60 A. Issues of statistical processing of experimental data and cognitive visualization of the obtained curves involving the cognitive graphic tool 2-simplex have also been considered within the framework of this research. The simulator designed may serve as a basis for developing a product line of energy-efficient power supplies for autonomous objects based on renewables, including those operating in northern territories.