Bored coffee beans (BCBs) are the residues left from the pest Hypothenemus hampei that attacks coffee crops, resulting in enormous economic losses. The bioconversion of monosaccharides from BCBs into hyaluronic acid (HA) is appealing both for using the residues and given the high commercial value of HA. This study dealt with the production of HA using Streptococcus zooepidemicus by employing either acid (AcH) or enzymatic (EnH) hydrolyzates from BCBs. The highest release of monosaccharides (evaluated using surface response methodology) was obtained with EnH (36.4 g/L); however, S. zooepidemicus produced more HA (1.5 g/L) using AcH compared to EnH. Hydrolyzates from acetone-extracted BCBs yielded 2.7 g/L of HA, which is similar to the amount obtained using a synthetic medium (2.8 g/L). This report demonstrates the potential of hydrolyzates from bored coffee beans to produce HA by S. zooepidemicus.
To take advantage of the residues generated in the production of products from green coffee and due to the special interest in the compounds contained in the bean, a by-product obtained after the extraction of the oil was studied. The physical characterization of the green-coffee-bean by-product was carried out. Subsequently, the extraction of compound 5-CQA was carried out via leaching using central composition design 24 and evaluating factors such as temperature, time, solid/solvent ratio, and ethanol percentage, and its yield was quantified using HPLC. In addition, the response-surface methodology was used to maximize the efficiency of 5-CQA extraction and to perform the kinetic study. Yields of 59 ± 2 mg of 5-CQA/g from the by-product were obtained, and by selecting the best leaching conditions, the kinetic study was performed at 45, 60, and 75 °C, increasing the yield to a total of 61.8 ± 3 mg of 5-CQA/g. By applying the kinetic model of mass transfer, a fit of R2 > 0.97 was obtained, with values between 0.266 and 0.320 min−1. This study showed an approach to optimize the 5-CQA extraction conditions, resulting in a simple, fast, reproducible, accurate, and low-cost method.
About Me
CUCEI-Universidad de Guadalajara, Blvd. M. García Barragán 1421, C.P. 44430, Guadalajara, Jal., México
CUCEI-Universidad de Guadalajara, Blvd. M. García Barragán 1421, C.P. 44430, Guadalajara, Jal., México