This study employs a rigorous methodology to assess the condition of the hydraulic oil in a recently introduced mini skid-steer loader. The assessment is conducted through laboratory analysis, which adheres to a range of international standards. The objective is to provide accurate insights into the viscosity, particle count, and characterisation of the oil, along with thermographic data. The friction of oil is evaluated at specific time points: 0, 10, 100, 125, and 150 h of operation. This examination offers a comprehensive insight into the alterations in oil characteristics during a pivotal period when machine components are undergoing initial consolidation and abrasion to attain the factory-defined performance thresholds. The principal aim of this research is to provide valuable insights into the wear of oil and hydraulic system components through an in-depth analysis of a range of variables. Moreover, the investigation aims to ascertain the impact of this factor on the temperature elevation of system components and accessories to formulate enhanced technical guidelines for implementation. The main results indicate the presence of particles in the oil, resulting in a cleanliness code of 23/21/13, which exceeds the permissible threshold of 20/18/15 specified in ISO 11171. In addition, hydraulic oil shows a viscosity instability of more than 10% due to moisture absorption, leading to wear of mechanical components composed of iron, nickel, copper, zinc, and silicon. This deterioration is corroborated by thermographic evaluations, which reveal a considerable temperature increase in components such as cylinders and system accessories.

This study investigates how three technical factors—steering wheel tilt, torque, and cabin vibration frequency—affect driver posture. Heavy-truck drivers often suffer from musculoskeletal disorders (MSDs), mainly due to poor cabin ergonomics and prolonged postures during work. In countries like Ecuador, making major structural changes to cabin design is not feasible. These factors were identified through video analysis and surveys from drivers at two Ecuadorian trucking companies. An experimental system was developed using a simplified cabin to control these variables, while posture and muscle activity were recorded in 16 participants using motion capture, inertial sensors, and electromyography (EMG) on the upper trapezius, middle trapezius, triceps brachii, quadriceps muscle, and gastrocnemius muscle. The test protocol simulated key truck-driving tasks. Data were analyzed using ANOVA (${\displaystyle p<0.05}$), with technical factors and mass index as independent variables, and posture metrics as dependent variables. Results showed that head mass index significantly affected head abduction–adduction (${\displaystyle -}$8.12 to ${\displaystyle -}$2.18°), and spine mass index influenced spine flexion–extension (${\displaystyle -}$0.38 to 6.99°). Among technical factors, steering wheel tilt impacted trunk flexion–extension (${\displaystyle -}$13.56 to 16.99°) and arm rotation (${\displaystyle -}$31.1 to 19.7°). Steering wheel torque affected arm rotation (${\displaystyle -}$30.49 to ${\displaystyle -}$6.77°), while vibration frequency influenced forearm flexion–extension (3.76 to 16.51°). EMG signals showed little variation between muscles, likely due to the protocol’s short duration. These findings offer quantitative support for improving cabin ergonomics in low-resource settings through targeted, cost-effective design changes.

Ergonomic risk analysis inherent in neonate bathing activity performed by nurses using the REBA methodology through kinect depth sensors

The absence of quantitative parameters to determine the mobility of the body segments required by functional assessment scales such as Rapid Entire Body Assessment (REBA) reduces its reliability by identifying risks based only on postural observation. This work measures the ergonomic risk associated with the neonatal bathing activity performed by nurses, the influence of the introduction of Kinect sensors, and their marker-less skeleton tracking function in conjunction with the postural analysis tool REBA to reduce the inter-observer variability and the subjectivity of the results. Many people without injuries reproduced the sequence of movements of a baby's body wash task, selected as the most critical within the activity. The use of a reference motion capture system, such as photogrammetry, was used to check the validity of Kinect as a measurement instrument and its precision. Variables such as the recording frequency of the sensors, and their location to the participants, influence the detection of body positions. This paper demonstrates the need for improving the nurses’ posture because it is associated with an intermediate level of ergonomic risk and requires intervention.

This exploratory study assessed the vehicle- and route-dependent response of five multipoint injection passenger vehicles to two commercial fuel additives marketed as octane-related gasoline additives under real-world high-altitude driving conditions in Quito, Ecuador. The tests were conducted on one urban route and one rural/peripheral route using base gasoline with a nominal octane index of RON 85, RON 85 gasoline with Additive A, and RON 85 gasoline with Additive B. Fuel economy and CO₂-related indicators were obtained through the OBD-II port using the Torque Pro application; therefore, the reported values were interpreted as electronic control unit-based estimates rather than direct gravimetric fuel consumption or laboratory emissions measurements. The revised analysis used OBD-derived trip-average fuel economy as the primary response variable. The mixed-effects model showed a significant effect of route on fuel economy (p < 0.001) and a significant fuel condition × route interaction (p = 0.0089), while the main effect of fuel condition was not statistically significant (p = 0.0699). Additive B increased the mean OBD-derived trip-average fuel economy on the urban route from 11.56 to 12.60 km·L⁻¹, but reduced it on the rural route from 13.46 to 12.65 km·L⁻¹. At the vehicle level, the previously extreme Vehicle 3 response was revised to a more plausible increase from 11.03 to 13.64 km·L⁻¹ (+23.68%) when trip-average fuel economy was used. Since the actual RON/MON values and physicochemical properties of the final fuel blends were not experimentally measured, the observed responses cannot be attributed exclusively to octane number enhancement. Overall, the findings indicate that commercial additive performance was vehicle- and route-dependent rather than universally beneficial. This field-based assessment supports evidence-informed decision-making for sustainable mobility and aligns with SDG 16 and SDG 17 through transparent technical evaluation and academic collaboration.