Demeke Abay Ashebir

Demeke Abay Ashebir

Aerostructures Innovation Research Hub, Swinburne University of Technology, Melbourne, Victoria, Australia
+1
orcid
Ph.D. Candidate

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 October 2024 in Polymers
Verified
Journal Article
Open access
PDF file
Demeke Abay AshebirDemeke Abay Ashebir
Demeke Abay Ashebir
AHAndreas Hendlmeier
Andreas Hendlmeier
MDMichelle Dunn
Michelle Dunn
RAReza Arablouei
Reza Arablouei
Stepan LomovStepan Lomov
Stepan Lomov
MNM. Nikzad
M. Nikzad
Additive manufacturing (AM) defects present significant challenges in fiber-reinforced thermoplastic composites (FRTPCs), directly impacting both their structural and non-structural performance. In structures produced through material extrusion-based AM, specifically fused filament fabrication (FFF), the layer-by-layer deposition can introduce defects such as porosity (up to 10–15% in some cases), delamination, voids, fiber misalignment, and incomplete fusion between layers. These defects compromise mechanical properties, leading to reduction of up to 30% in tensile strength and, in some cases, up to 20% in fatigue life, severely diminishing the composite’s overall performance and structural integrity. Conventional non-destructive testing (NDT) techniques often struggle to detect such multi-scale defects efficiently, especially when resolution, penetration depth, or material heterogeneity pose challenges. This review critically examines manufacturing defects in FRTPCs, classifying FFF-induced defects based on morphology, location, and size. Advanced NDT techniques, such as micro-computed tomography (micro-CT), which is capable of detecting voids smaller than 10 µm, and structural health monitoring (SHM) systems integrated with self-sensing fibers, are discussed. The role of machine-learning (ML) algorithms in enhancing the sensitivity and reliability of NDT methods is also highlighted, showing that ML integration can improve defect detection by up to 25–30% compared to traditional NDT techniques. Finally, the potential of self-reporting FRTPCs, equipped with continuous fibers for real-time defect detection and in situ SHM, is investigated. By integrating ML-enhanced NDT with self-reporting FRTPCs, the accuracy and efficiency of defect detection can be significantly improved, fostering broader adoption of AM in aerospace applications by enabling the production of more reliable, defect-minimized FRTPC components.

10 October 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Demeke Abay AshebirDemeke Abay Ashebir
Demeke Abay Ashebir
GMGetinet Asrat Mengesha
Getinet Asrat Mengesha
DSDEVENDRA KUMAR SINHA
DEVENDRA KUMAR SINHA
Hybrid reinforced particulate aluminum matrix composite materials (HAMCs) are a breakthrough kind of material made by combining two or more distinct reinforcing components in the aluminum (Al) matrix. Composites with many reinforcing phases offer a superior overall mix of characteristics than composites with only one. This articles wide literature review of metal matrix composite (MMC) especially for aluminum matrix composites (AMC) was carried out. Discussions of various widely adopted synthesis methods such as stir casting and powder metallurgy have been presented. The effect of various reinforcement ceramic particles such as silicon carbide (SiC), aluminum oxide (Al2O3), graphite (Gr) on the mechanical and metallurgical properties of MMC has been reviewed. The summary of various characterizations such as X-ray diffraction (X-RD), and optical microscopy (OM) including testing such as hardness, tensile, compressive, and tribological behavior has been discussed in detail to demonstrate a full grasp of the many features of HAMCs, such as manufacturing, physicomechanical properties, wear, and corrosion characteristics. Future developments and potentially useful materials as alternative reinforcements are discussed at the end of the review.

1 December 2022 in Engineering Research Express
Verified
Journal Article
Open access
Demeke Abay AshebirDemeke Abay Ashebir
Demeke Abay Ashebir
GMGetinet Asrat Mengesha
Getinet Asrat Mengesha
DSDEVENDRA KUMAR SINHA
DEVENDRA KUMAR SINHA
YBYodit Birhanu Bereda
Yodit Birhanu Bereda
Hybrid aluminum matrix composites (HAMCs) are a new class of advanced composite and hybrid materials that can be customized and engineered to achieve specific properties for specific applications in specific environments. HAMCs are popular in the transportation industry due to their reduced cost and fuel consumption as compared to conventional materials. This research article has mainly focused on multi-response optimization through an L16 orthogonal array experimental design employing Taguchi-based Grey Relational Analysis. It was intended to explore the influence of tetra hybrid reinforced HAMCs synthesized using pure Al matrix with fixed wt% of primary reinforcements (5 wt% SiC and 5 wt% Al2O3) and varying wt% of secondary reinforcements such as (0.5, 2.5, 4.5, and 6.5) wt% of Gr and (0.5, 2.5, 4.5, and 6.5) wt% of SCBA on physicomechanical properties of HAMCs when milling time, compaction pressure, and sintering temperature were varied. The Taguchi-Grey’s relational analysis gave the optimal combination of the process and reinforcement parameters for both the physical and the mechanical properties such as milling time (5 h.), compaction pressure (55 MPa), sintering temperature (450 °C), Gr content (0.5 wt%), and SCBA content (4.5 wt%). At the optimum parameter settings, the average density, porosity, hardness, compressive strength, and ultimate tensile strength were 2.5118 gm cm−3, 0.8653%, 4228.45 MPa, 343.33 MPa, and 1516.41 MPa, respectively. The utilization of Taguchi and GRA methods have significantly confirmed that the influence of compaction pressure was highest among the all the other four parameters. The newly synthesized tetra hybrid reinforced HAMCs have shown superior physicomechanical properties compared to pure Al, and single as well as double reinforced HAMCs. Therefore, it is anticipated that the newly developed tetra hybrid reinforced AMC material will be utilized in heavy-duty, aerospace, medical, automotive, marine, and other applications.

1 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
Demeke Abay AshebirDemeke Abay Ashebir
Demeke Abay Ashebir
GMGetinet Asrat Mengesha
Getinet Asrat Mengesha
DSDEVENDRA KUMAR SINHA
DEVENDRA KUMAR SINHA
Hybrid aluminum matrix composites (HAMCs) are a new class of advanced materials that can be customized and engineered to achieve specific properties for specific applications in specific environments. HAMCs find a wide range of popularity in the transportation sector because of lower noise and lower fuel consumption over other materials. This research aims to synthesize, characterize, and test the physicomechanical characteristics of tetra hybrid (SiC, Al2O3, Gr, and sugarcane bagasse ash (SCBA)) reinforced HAMCs via powder metallurgy (PM) processing. Tetra hybrid reinforced HAMCs were synthesized using a pure Al matrix with fixed wt% of primary reinforcements (5 wt% SiC and 5 wt% Al2O3) and varying wt% of secondary reinforcements such as 0.5, 2.5, 4.5, and 6.5 wt% Gr and 0.5, 2.5, 4.5, and 6.5 wt% SCBA. It mainly focused on phase purity investigation using XRD, thermal analysis using TGA‐DTA, and surface area and micropore size analysis using BET and physicomechanical tests to explore the materials’ behavior of the newly synthesized HAMCs. The increase in wt% of secondary reinforcements decreases both the density and porosity while increasing the hardness and compressive strength up to a certain level above which it begins to reverse because of the increase in wt% of hard particles of SiC, Al2O3, and SCBA. The Vickers hardness and compressive strength of the AS4 HAMC with 10 wt% (SiC+Al2O3) and 9 wt% (Gr+SCBA) were improved by 446.40% and 209.75%, respectively. The newly synthesized tetra hybrid reinforced HAMCs showed superior physicomechanical properties compared to pure Al and single and double reinforced HAMCs. As a result, the new tetra hybrid reinforced HAMC material is predicted to have potential applications in automotive, aerospace, defense, and various other structural applications.

20 October 2023 in Journal of Composite Materials
Verified
Journal Article
Closed access
Demeke Abay AshebirDemeke Abay Ashebir
Demeke Abay Ashebir
GMGetinet Asrat Mengesha
Getinet Asrat Mengesha
DSDevendra Kumar Sinha
Devendra Kumar Sinha
YBYodit Birhanu Bereda
Yodit Birhanu Bereda
This study investigates Hybrid Particulate-Reinforced Aluminum Matrix Composites (HPRAMCs), a material class known for exceptional physico-mechanical, tribological, and corrosion resistant properties. The research synthesizes HPRAMCs using SiC, Al2O3, graphite (Gr), and sugar cane bagasse ash (SCBA) reinforcements through a powder metallurgy process, followed by sintering at 550°C for 3 h. Comprehensive tests include X-ray diffraction (XRD) for phase analysis, physico-mechanical assessments, tribological evaluations, and corrosion resistance analyses. Notably, secondary reinforcements significantly reduce porosity, with AS4 HPRAMC exhibiting a 0.53% porosity, while AS1 HPRAMC has 1.446%. AS4 HPRAMC displays a remarkable 209.76% increase in compressive strength and a 446.40% boost in material hardness compared to pure aluminum. Secondary reinforcements also improve tribological performance, reducing wear loss by 60.27% and the coefficient of friction by 89.89%. Exceptional corrosion resistance, with an inhibition efficiency of 99.691%, is observed in the AS4 HPRAMC sample, confirmed by scanning electron microscopy (SEM). These findings underline the substantial potential of HPRAMC materials, positioning them as promising candidates for aerostructural components, aircraft systems, automobiles, spacecraft, and high-performance engineering applications.

16 March 2025 in Composites Part A: Applied Science and Manufacturing
Verified
Journal Article
Closed access
PAPrabakaran Annamalai
Prabakaran Annamalai
VGVenkatesh Gangipamula
Venkatesh Gangipamula
Demeke Abay AshebirDemeke Abay Ashebir
Demeke Abay Ashebir
ASAbdus Sattar
Abdus Sattar
SLStepan V. Lomov
Stepan V. Lomov
MNMostafa Nikzad
Mostafa Nikzad