Diego Alexander Tibaduiza

Dr. Diego Alexander Tibaduiza

Universidad Nacional de Colombia-Sede Bogotá
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 January 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Diego Alexander TibaduizaDiego Alexander Tibaduiza
Diego Alexander Tibaduiza
RGRICARDO GOMEZ
RICARDO GOMEZ
Cesar PedrazaCesar Pedraza
Cesar Pedraza
DADavid Agis
David Agis
Francesc PozoFrancesc Pozo
Francesc Pozo
The damage identification process provides relevant information about the current state of a structure under inspection, and it can be approached from two different points of view. The first approach uses data-driven algorithms, which are usually associated with the collection of data using sensors. Data are subsequently processed and analyzed. The second approach uses models to analyze information about the structure. In the latter case, the overall performance of the approach is associated with the accuracy of the model and the information that is used to define it. Although both approaches are widely used, data-driven algorithms are preferred in most cases because they afford the ability to analyze data acquired from sensors and to provide a real-time solution for decision making; however, these approaches involve high-performance processors due to the high computational cost. As a contribution to the researchers working with data-driven algorithms and applications, this work presents a brief review of data-driven algorithms for damage identification in structural health-monitoring applications. This review covers damage detection, localization, classification, extension, and prognosis, as well as the development of smart structures. The literature is systematically reviewed according to the natural steps of a structural health-monitoring system. This review also includes information on the types of sensors used as well as on the development of data-driven algorithms for damage identification.

21 February 2017 in Sensors
Verified
Journal Article
Open access
PDF file
JVJaime Vitola
Jaime Vitola
Francesc PozoFrancesc Pozo
Francesc Pozo
Diego Alexander TibaduizaDiego Alexander Tibaduiza
Diego Alexander Tibaduiza
MAMaribel Anaya
Maribel Anaya
Civil and military structures are susceptible and vulnerable to damage due to the environmental and operational conditions. Therefore, the implementation of technology to provide robust solutions in damage identification (by using signals acquired directly from the structure) is a requirement to reduce operational and maintenance costs. In this sense, the use of sensors permanently attached to the structures has demonstrated a great versatility and benefit since the inspection system can be automated. This automation is carried out with signal processing tasks with the aim of a pattern recognition analysis. This work presents the detailed description of a structural health monitoring (SHM) system based on the use of a piezoelectric (PZT) active system. The SHM system includes: (i) the use of a piezoelectric sensor network to excite the structure and collect the measured dynamic response, in several actuation phases; (ii) data organization; (iii) advanced signal processing techniques to define the feature vectors; and finally; (iv) the nearest neighbor algorithm as a machine learning approach to classify different kinds of damage. A description of the experimental setup, the experimental validation and a discussion of the results from two different structures are included and analyzed.

13 December 2012 in Structural Control and Health Monitoring
Verified
Journal Article
Closed access
PDF file
Diego Alexander TibaduizaDiego Alexander Tibaduiza
Diego Alexander Tibaduiza
LMLuis Eduardo Mujica
Luis Eduardo Mujica
Jose RodellarJose Rodellar
Jose Rodellar
Damage classification is an important issue within SHM going beyond the purely damage detection. This paper proposes a data-driven statistical approach for damage classification, which is constructed over a distributed piezoelectric active sensor network for excitation and measurement of vibrational structural responses. At different phases, a single piezoelectric transducer is used as actuator, and the others are used as sensors. An initial baseline model for each phase for the healthy structure is built by applying PCA to the data collected in several experiments. In addition, same experiments are performed with the structure in different states (damaged or not), and the dynamic responses are projected into the different baseline PCA models for each actuator. Some of these projections and damage indices are used as input features for a self-organizing map, which is properly trained and validated to build a pattern baseline model. This baseline is further used as a reference for blind diagnosis tests of structures. Both training/validation and diagnosis modes are experimentally assessed using an aluminum plate instrumented with four piezoelectric transducers. Damages are simulated by adding mass at different positions. Results show that all these damages are successfully classified both in the baseline pattern model and in further diagnosis tests. Copyright © 2012 John Wiley & Sons, Ltd.

8 January 2015 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Open access
PDF file
Diego Alexander TibaduizaDiego Alexander Tibaduiza
Diego Alexander Tibaduiza
LMLuis Eduardo Mujica
Luis Eduardo Mujica
JRJosé Rodellar
José Rodellar
Alfredo GüemesAlfredo Güemes
Alfredo Güemes
One of the most important tasks in structural health monitoring corresponds to damage detection. In this task, the existence of damage should be determined. In the literature, several potentially useful techniques for damage detection can be found, and their applicability to a particular situation depends on the size of the critical damages that are admissible in the structure. Almost all of these techniques follow the same general procedure: the structure is excited using actuators, and the dynamical response is sensed at different locations throughout the structure. Any damage will change this vibrational response. The state of the structure is diagnosed by means of the processing of these data. Several studies have shown that the detection of changes in a structure depends on the distance from the damage to the actuator as well as the configuration of the sensor network. In this article, the authors considered the advantage of using an active piezoelectric system, where the lead zirconate titanate transducers are used as actuator and sensors in different actuation phases. In each actuation phase of the diagnosis procedure, one lead zirconate titanate transducer is used as actuator (a known electrical signal is applied), and the others are used as sensors (collecting the wave propagated through the structure at different points). An initial baseline model for undamaged structure is built applying principal component analysis to the data collected by several experiments and after the current structure (damaged or not) is subjected to the same experiments, and the collected data are projected into the principal component analysis models. Two of these projections and four damage indices ( T2-statistic, Q-statistic, combined index, and I2 index) by each actuation phase are used to determine the presence of damages and to distinguish between them. These indices are calculated based on the analysis of the residual data matrix to represent the variability of the data projected within the residual subspace and the new space of the principal components. To validate the approach, data from two aeronautical structures—an aircraft skin panel and an aircraft turbine blade—are used.

1 December 2013 in Mechanical Systems and Signal Processing
Verified
Journal Article
Closed access
Diego Alexander TibaduizaDiego Alexander Tibaduiza
Diego Alexander Tibaduiza
MTM.-A. Torres-Arredondo
M.-A. Torres-Arredondo
LMLuis Eduardo Mujica
Luis Eduardo Mujica
Jose RodellarJose Rodellar
Jose Rodellar
CFC.-P. Fritzen
C.-P. Fritzen

13 April 2024 in Biosensors
Verified
Journal Article
Open access
PDF file
Diego Alexander TibaduizaDiego Alexander Tibaduiza
Diego Alexander Tibaduiza
MAMaribel Anaya
Maribel Anaya
Johan Danilo Gómez BocanegraJohan Danilo Gómez Bocanegra
Johan Danilo Gómez Bocanegra
Juan Daniel Daniel Sarmiento AbelloJuan Daniel Daniel Sarmiento Abello
Juan Daniel Daniel Sarmiento Abello
MVMaria Paula Perez Vargas
Maria Paula Perez Vargas
CSCarlos Eduardo Sánchez
Carlos Eduardo Sánchez
As technology advances, electronic tongues and noses are becoming increasingly important in various industries. These devices can accurately detect and identify different substances and gases based on their chemical composition. This can be incredibly useful in fields such as environmental monitoring and industrial food applications, where the quality and safety of products or ecosystems should be ensured through a precise analysis. Traditionally, this task is performed by an expert panel or by using laboratory tests but sometimes becomes a bottleneck because of time and other human factors that can be solved with technologies such as the provided by electronic tongue and nose devices. Additionally, these devices can be used in medical diagnosis, quality monitoring, and even in the automotive industry to detect gas leaks. The possibilities are endless, and as these technologies continue to improve, they will undoubtedly play an increasingly important role in improving our lives and ensuring our safety. Because of the multiple applications and developments in this field in the last years, this work will present an overview of the electronic tongues and noses from the point of view of the approaches developed and the methodologies used in the data analysis and steps to this aim. In the same manner, this work shows some of the applications that can be found in the use of these devices and ends with some conclusions about the current state of these technologies.