In the current literature, information can mainly be found about free and hindered settling of isometric particles in Newtonian and non-Newtonian fluids. These conclusions cannot be used to describe the sedimentation of non-isometric particle in non-Newtonian fluids. For this reason, we have carried out systematic experiments and calculated the correlation of the hindered settling velocity of a cloud of non-isometric particles in high-viscosity and pseudoplastic liquid. The experiments were performed in transparent model fluids, namely, glycerine (a Newtonian fluid) and an aqueous solution of carboxylmethylcelulose CMC (a non-Newtonian pseudo-plastic liquid). These fluids have similar rheological properties, for example, the fresh fine-grained cementitious composites HPC/UHPC. The experiments were carried out with steel fibers with a ratio of d/l = 0.3/20. The settling velocity was determined for fiber volumes from 1% to 5%. While it is known from previous studies that for spherical particles the hindered settling velocity is proportional to the porosity of a suspension cloud on exponent 4.8, which was confirmed by our verification experiment, for the studied fiber particles it is proportional to the porosity on exponent 22.1. This great increase in the exponent is an effect of both the shape of the particles and, in particular, a mutual influence that arises from their interweaving and connection in the suspension.
The homogenization of the agitated batch and ensuring the suspension of particles are the most frequently encountered requirements in terms of mixing applications. These operations are affected by the flow of the agitated batch. The geometrical parameters of the mixing system, especially the shape of the agitator blade, affect flow and circulation in the agitated batch. The present work provides a general description of the most common processes in the agitated batch (blending and particle suspension), hydrodynamic parameters (flow in agitated batches, pumping and circulation capacity of impellers) and the geometrical configurations of the mixing equipment (shape of vessel, baffle and impeller, and their mutual arrangement) that influence the process. The dimensionless process characteristics of the agitator were derived by theoretical analysis. These characteristics were applied to evaluate an extensive set of experimental data with various geometric configurations of the mixing equipment. This study shows how the flow in the agitated batch, caused by the pumping and circulating effects of the agitators, affects the parameters and energy efficiency of these processes, depending on the geometric configuration of the mixing equipment. Moreover, the benefits of the hydrofoil impellers used for these mixing processes are presented.
Carboxymethylcellulose (CMC) and ultrasound gel (USG) seem to be suitable clear model fluids to substitute real ultra-high-performance concretes (UHPCs), enabling experimental monitoring of events occurring within these mixtures at similar flow behaviour. USG is eligible for UHPC mixtures with significant yield stress. CMC having a suitable concentration is better for UHPCs exhibiting indistinct yield stress. The rheological behaviour of real UHPC mixtures as well as substituting model fluids was measured using a non-standard system consisting of a vessel stirred by an anchor or a screw agitator. In addition, a standard rotational rheometer system with concentric cylinder geometry was used for optimization of the above-mentioned method of measurement and also for measuring the rheological parameters of the substituting model fluids. This article deals with the methodology for measuring the rheological properties of these substances and presents the results of the measurements using flow curves and rheological models.
The aim of this work is to propose a methodology for evaluating inhomogeneity due to the sedimentation of fibres in High-Performnce Concrete (HPC) mixtures. HPC mixtures makes better mechanicalphysical properties than ordinary concrete. To achieve higher strengths, the fine-grained matrix is reinforced with the reinforcement-fibres. The type of used fibres and their homogenization in mixture has an influence on the final mechanical properties of HPC mixture. Four concrete mixtures with same component proportion was chosen for experiments. Water was the only one component, that was changing in mixture recipes. Steel fibres with a ratio of the diameter to length = 0.3/20 were used as reinforcement. The fibre volume in mixture was 1.5 %. The microscopy analysis was used for evaluation of the fibre distribution in the test specimens. It was obtained, that the concentration of the fibres increases with distance from the surface to the bottom of the HPC structure and this non-homogeneity increases with higher water dosage. The dependence of sedimentation of fibres on composition of HPC mixtures can be used for evaluation and optimization of final mechanical properties of the HPC structures.