The 2024-T3 aluminum alloy is extensively used for making aircraft parts. This alloy has a relatively low ductility at room temperature, and is generally heat-treated before forming. The present study experimentally and numerically analyzes the formability of AA2024-T3 sheets subjected to biaxial stretching. The aim of this study is to provide an appropriate criterion to accurately predict sheet failure, which will allow for the optimization of the stretching operations, and provide the means to evaluate when heat treatment can be avoided. The fracture process of AA2024-T3 stretched sheets is experimentally analyzed, obtaining the FLD at fracture. A selection of classical ductile failure criteria (integral and local criteria) is implemented in ABAQUS, and their capability to predict sheet failure is studied in detail. It is found that the local criteria, in particular Treca's criterion, provide a better description of the failure process than the integral criteria. Finally, the influence of bending strains in the initiation of failure is also discussed.
This paper aims to propose a functional methodology to produce cranial prostheses in polymeric sheet. Within the scope of rapid prototyping technologies, the single-point incremental forming (SPIF) process is used to demonstrate its capabilities to perform customized medical parts. The methodology starts processing a patient’s computerized axial tomography (CAT) and follows with a computer-aided design and manufacture (CAD/CAM) procedure, which finally permits the successful manufacturing of a customized prosthesis for a specific cranial area. The formability of a series of polymeric sheets is determined and the most restrictive material among them is selected for the fabrication of a specific partial cranial prosthesis following the required geometry. The final strain state at the outer surface of the prosthesis is analysed, showing the high potential of SPIF in manufacturing individualized cranial prostheses from polymeric sheet. This paper proposes a complete methodology to design and manufacture polymer customized cranial prostheses from patients’ CATs using the novel SPIF technology. This is an application of a new class of materials to the manufacturing of medical prostheses by SPIF, which to this purpose has been mainly making use of metallic materials so far. Despite the use of polymers to this application is still to be validated from a medical point of view, transparent prostheses can already be of great interest in medical or engineering schools for teaching and research purposes.