The objective of this paper is to present and compare the results of numerical solutions of contact problem for two types of seats subjected to typical sitting loadings. The first seat is made of a typical hyperelastic foam, the other is designed with an auxetic polyamid spring skeleton. Computer simulations of the seat structure under a typical static loading exerted by a human body are performed by means of ABAQUS FEA. The model provides an insight into deformation modes and stress field in relation to geometric and material parameters of the seat structure.The other type of seat, due to the fact of global auxecity and progressive springs characteristics reduces contact stress concentrations, giving an advantegous distribution of pressure and provides the sensation of physical comfort. The proper seat skeleton shape leads to an improvement of ergonomic quality.
Light layer honeycomb panels could replace traditional wood materials, if their stiffness and strength properties could be improved. The aim of this research was to design and determine elastic properties of sandwich panels (SPs) based on a dual corrugated HDF core. Stiffness matrix values of elements were determined by a numerical method. The 3D calculation results were compared with those of the homogeneous model. The calculation results were collated with those of experimental investigations. It was demonstrated that the linear elasticity modulus as well as the modulus of rupture of the SPs were comparable with mechanical properties of a particle board with identical thickness, while the SP has a 1/3 lower density. The panel core exhibited significant orthotropic properties. In the xy plane it could be characterized as an auxetic structure. The homogeneous model leads to results similar to those achieved from the 3D model and observed in experimental tests.
23 December 2015 in European Journal of Medical Research
We aim to illustrate the potential viability of MCTD as an underlying aetiology of Melkersson–Rosenthal syndrome. The case is probably the first description available in the literature of the Melkersson–Rosenthal as an early manifestation of mixed connective tissue disease. The Melkersson–Rosenthal syndrome consists of a triad of recurrent lip and/or face swelling, fissured tongue, and intermittent facial palsy. Mixed connective tissue disease is a multisystemic disorder with overlapping features of systemic lupus erythematosus, scleroderma, and polymyositis, and is differentiated from them by a high titer of antibodies to ribonucleoprotein. The paper presents a case report of Melkersson–Rosenthal syndrome with an onset in childhood that derived from vasculitis that turned out to be an early manifestation of mixed connective tissue disease. We used MRI to evaluate patient’s brain structure and Immunoblot Ena Profil 1 test to test serum autoantibodies level. The patient has a typical for Melkersson–Rosenthal syndrome triad of symptoms: bilateral facial nerve palsy, lingua plicata and facial oedema. Both TC and MRI of the head show no changes as well as laboratory tests except Anti-SS-A (Anti-Ro) and Anti-RNP autoantibody serum level that was highly positive. Neurological involvement of the MCTD usually includes, according to the frequency of the occurrence, trigeminal neuralgia, headaches, sensorineural hearing, cerebral haemorrhage, transverse myelitis, cauda equina syndrome, retinal vasculitis, progressive multifocal encephalopathy, and demyelinating neuropathy. For clinical practice it is important to remember that Melkersson–Rosenthal syndrome can also be the neurological manifestation of MCTD, especially when accompanied by other systemic symptoms.
In this paper, the dynamic responses of a large-scale multiple-support road viaduct to mining-induced seismic events registered in two regions of mining activity were compared. The regions differ in geological structure, which results in discrepancies in the dominant frequency content. Spatial variation of ground motion causing the kinematic excitation non-uniformity was accounted for in the dynamic analyses of this large-scale structure. Non-uniform mining-induced kinematic excitation models were proposed, with respect to the specificity of mining origin quakes. The dynamic performance of the viaduct was determined using three different methods of calculation: the time history analysis, the response spectrum analysis, and the multiple support response spectrum analysis. Both the uniform and non-uniform kinematic excitation models were adopted for the dynamic performance assessment. The research revealed that the dynamic response of some members of the structure, determined using the non-uniform excitation model, was significantly greater than that obtained for the uniform one. Hence, in the dynamic analysis of multiple-support structures under mining-induced events, the effect of spatial variation of ground motion should be considered. The study pointed out that the commonly used response spectrum analysis may lead to the underestimation of the dynamic response of large-scale multiple-support structures. Instead, the multiple support response spectrum method, which takes into account the non-uniformity of ground motion, is recommended as a conservative approximation. This method provides a safe upper estimation of the full-dynamic analysis results of large-scale structures under mining-induced tremors. Finally, the research indicated that the dynamic performance of a structure strongly depends on the frequency range attributed to a specific mining region. The dynamic performance of identical engineering structures under tremors of similar maximal amplitudes may differ significantly due to discrepancies in frequency contents of shocks occurring in various mining regions.
The paper presents the analysis of the dynamic response of a steel pipeline with concrete coating to a real earthquakeregistered in central Poland in 2012. The peak ground acceleration of the shock was scaled up to maximal values predicted for this seismic zone. To represent theinelastic behavior of the material of the concrete coating under dynamic loading, the concrete damaged plasticity constitutive model was assumed.The modelallows to describeplastic strains and irreversible tensile and compression damage that occurs during the cracking process.For seismic analysis two models (uniform and non-uniform) of kinematic excitation were applied. In the modelof uniform excitation it was assumed that the motion of all supports was identical. Inthe model of non-uniform excitation, typical for long structures, the wave passage along the pipelinewith different velocities (500, 400 and 300 m/s) was taken into account. It occurred that for the model of uniform excitation the concrete material of the coating remained elastic with no tensile damage. For the model of non-uniform excitation, inelastic behaviour of the coating was observed. The plastic strain areas appeared above all supports. The tensile damage (cracking) wasalso noticed in these areas: the lower wave velocity was assumed, the greater area of concrete coating was affected by plastic strains and tensile damage (cracking). It was the consequence of the quasi-static effects which resulted from ground deformations imposed on the pipeline during the seismic shock.