In this research, the steady state and dynamic performances of two-lobe noncircular journal bearings with couple stress lubricant are presented. The lubricating oil, containing additives and contaminants, is modeled as the couple stress fluid. The modified Reynolds equation is obtained using the couple stress lubrication theory and is then solved by finite element method as an efficient numerical technique. The steady-state characteristics of bearings, including the load carrying capacity and attitude angle, are determined for various values of the couple stress parameter. The results show that applying the couple stress fluid improves the efficiency of two-lobe bearings in terms of an increased load carrying capacity and reduced attitude angle. Also, the stability performance of the investigated bearings is studied using rotor motion equations based on linear and nonlinear dynamic methods. The results indicate that any increase in the lubricant couple stress parameter enhances the bearing ability to damp the rotor perturbations. In other words, by varying the lubricant from Newtonian oil to the couple stress type and upgrading its properties, the curves of the critical mass parameter and whirl frequency ratio have an increasing and decreasing trend, respectively. Based on the fourth-order Runge–Kutta method results, the dynamic trajectory of the rotor center in the bearing space changes with increasing the couple stress parameter from diverging disturbances and limits the cycle perturbations around the bearing center to converging oscillations to the static equilibrium point. Moreover, the effect of changing lubricant properties on the two-lobe bearing’s performance is more pronounced at higher values of the couple stress parameter, especially with an increase in the noncircularity of bearings’ geometry.
Purpose: The purpose of this study is to examine the thermo-hydrodynamic performance of tilted non-circular journal bearings lubricated with a micropolar fluid. The investigated bearing types are two- and three-lobe journal bearings with finite length. Design/methodology/approach: For this purpose, modified Reynolds, energy and three-dimensional Laplace equations are solved numerically by using generalized differential quadrature method. The effects of micropolarity characteristics of lubricants, such as characteristic length and coupling number, as well as tilt angle as a design parameter, on the performance of non-circular two- and three-lobe journal bearings are studied. Findings: The results show that the tilt angle can affect the temperature and pressure profiles causing variation in the performance of non-circular bearings. Increasing coupling number and decreasing characteristic length cause the load-carrying capacity to decrease because of the increase in maximum oil temperature of the fluid film of lubricant and decrease in the minimum oil base viscosity. So, it is possible to select suitable values of tilt angle for achieving optimum performance of these bearings. Originality/value: The non-circular bearings suggest several design parameters such as tilt angle for designers. By considering thermal effects for micropolar lubricant, the requirements of a specific application can be fulfilled.
19 November 2021 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Due to the wide range of journal bearings applications in the industrial machine, significant efforts have been made by tribology researchers to improve their performance in recent years. Designing new bearings geometry and using lubricants with new chemical compounds including additives are the most common solutions proposed to enhance the performance of journal bearing supports. New advancements in nanotechnology and producing the various types of nano particles have provided the chance of upgrading the properties of commercial lubricants. According to the different effect of nano fluids on the performance of mechanical systems corresponding to their composition, today they are used to achieve different goals in lubrication systems. Upgrading the steady state performance parameters including load carrying capacity, attitude angle, surface cooling and effective viscosity are among the expected results of applying nano lubricant in journal bearings. So, in this study the performance of hydrodynamic two lobe journal bearings lubricated with SiO2-multiwall carbon nano tubes /SAE40 hybrid nano fluid is presented considering the thermal effects. For this purpose, the governing Reynolds and energy equations as well as the equation of heat transfer in bearing shell are modified based on the properties of assumed rotor-bearing system. Then the effects of solid volume fraction of nano particles on the performance of two lobe bearings are studied for different amount of bearing noncircularity. The results indicate that upgrading the solid volume fraction of added nano particle to the SAE40 base oil, enhances the lubricant pressure distribution, load carrying capacity, and lubricant effective viscosity. Further, by increasing the solid volume fraction, the attitude angle and temperature of lubricant and rotor-bearing surfaces experience a decreasing trend. Generally, it's obvious from the results that choosing the appropriate solid volume fraction of SiO2-multiwall carbon nano tubes in hybrid nano oil composition, especially for high value of preload factor, can improve the performance of two lobe bearings.
The widespread use of journal bearings in rotating machinery has intensified the need to optimize their operational performance. A key determinant of bearing efficiency lies in the lubricant film thickness between the rotor and bearing surface. Recent studies demonstrate that strategically engineered surface textures can effectively modulate film thickness and enhance both static and dynamic characteristics of bearing. This investigation specifically examines how cubic, cylindrical, and semi-ellipsoidal texture geometries at varying depths influence the performance of noncircular two-lobe bearings. Through finite element analysis, the study evaluates critical performance parameters including load capacity, rotor attitude angle, critical mass threshold, and whirl frequency ratio to establish texture–depth relationships with system stability and operational efficiency. The analysis reveals that texturing the maximum pressure zone in lobe 2 significantly enhances bearing performance, with semi-ellipsoidal, cylindrical and cubic geometries, respectively. Also, the results demonstrate that texture geometry and depth significantly influence two-lobe bearing performance. Optimal enhancements in load capacity, whirl frequency reduction, and critical rotor mass occur at texture depths below the bearings clearance space width, with performance peaking before gradually declining as depth increases further. Notably, texture application in low-pressure or cavitation regions generally yields diminished or even counterproductive effects. The findings demonstrate that cubic textures provide optimal bearing performance across all depth ranges, with cylindrical and semi-ellipsoidal geometries ranking second and third, respectively, in comparative analysis.
6 December 2021 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Today, considerable uses of aerodynamic journal bearings have attracted the attention of many researchers in the field of tribology. Therefore, the theoretical and experimental analysis of their performance has been the subject of many researches. Growing application of the gas journal bearings is due to their capability in various engineering fields such as instrumentation and high-speed machines like spindles, small-scale turbomachines, and precision gyroscopes, dental milling machines, and many other rotor-bearing systems. Upgrading the performance of gas bearings by changing their geometry or using new compressible lubricants has always been one of the suggestions proposed by the tribology researchers. Recently, the development of new technologies such as laser milling and lithography increased the possibility of creating textured surfaces as a way to improve the performance of journal bearings. So, in this study, the effects of texture geometry on the steady-state performance of two-lobe noncircular aerodynamic journal bearings are presented. For this purpose, the governing Reynolds equation of hydrodynamic gas lubrication is analyzed by finite element method according to the changes of the lubricant film thickness in presence of the cubical, cylindrical, and ellipsoidal surface textures. Results show that the creation of textures on the lower lobe compared to the upper lobe or the whole surface is more effective on the performance of two-lobe aerodynamic bearings. Also, increasing both the dimple depth and the amount of bearings noncircularity, especially at shallow texture depth, cause more significant changes in the lubricant film pressure distribution and the bearing performance parameters such as load-carrying capacity, attitude angle, and frictional power loss. Further, it is obvious that the creation of cubical, cylindrical and ellipsoidal textures especially at shallow depth with an increase in the noncircularity of bearings ’ geometry have a higher impact on the steady-state performance of the studied rotor-bearing system, respectively.
About Me
Department of Mechanical Engineering, Faculty of Engineering, Ardakan University, Ardakan P.O. Box 184
Department of Mechanical Engineering, Faculty of Engineering, Ardakan University, Ardakan P.O. Box 184