Hand calculations, finite element (FE) analysis and experimental validation of chassis mounted platform design for defence and commercial off-road vehicles have been attempted in this work. The work was commenced with the thorough study of platform configuration, loading pattern, platform mount location and configuration on the vehicle chassis and relevant vehicle characteristics. Calculation of section modulus, shear force and bending moment of various structural members under specified loading has been carried out before proceeding with the FE modeling and analysis of platform. FE model of the chassis mounted platform has been made using shell elements and the boundary conditions have been imposed based on the loading pattern with an assumption of rigid vehicle chassis. Static and gradient analyses of the platform have been carried out for full scale and reduced scale prototype FE models. Experimental strain measurement at critical locations under different static and gradient loads has been carried out for design validation of chassis mounted platform using the scaled prototype. Close correlation has been found between the experimental stress values and FE stress analysis results for static and gradient load conditions. From the entire load tests conducted, it is observed that the strain values in rear portion are less as compared with those in front and mid portions of the platform in-spite of the rear overhang provision.
1 February 2017 in Indian Journal of Science and Technology
Methanol (CH3OH) and ethanol (C2H5OH) have came to limelight now-a-days because of their property of less polluting emittants and thought of as extremely economical due to its swish operative capacity. Low particulate level and soot free emission can also be obtained due to presence of oxygen in these fuels. We can obtain a considerable fuel efficiency and sound mileage if we double the carbon in ethanol which contains more energy. The structure is more similar to iso-butanol. Iso-butanol is unique in alcoholic fuels due to its equatorial affinity for water. The worldwide energy policy also aims to reduce greenhouse gas emissions occurred due to traditional fuels and thus developing renewable energy became an important part of this policy. Now-a-days transport sector has decreased its reliance on oil which generally contributes to hazardous environmental impact and to achieve this some alternative transport fuels such as biofuels, hydrogen and natural gas emerged up as a helping hand. Blending methanol into diesel and gasoline permits the mixture to possess an entire combustion with the presence of oxygen which increases its combustion efficiency and reduces greenhouse gas emission. Gasohol- a blend of gasoline and 10%methanol is available at plenty of petrol service stations as a regular automobile fuel within the United States. Brazil has successfully implemented and used methanol in terms of spark ignition engine operations as a fuel. Methanol has emerged up as a sustainable fuel for IC engines in past few decades because of its characteristics of soot free burning and higher efficiencies at less cost. The European Union decided to set 10% requirement of renewable energy in transport sector which is to be compiled with by 2020. In 2010, the transport sector utilized 4.70% of renewable energy out of which 91% was covered by biofuels.
30 September 2019 in International Journal of Recent Technology and Engineering (IJRTE)
Possibilities for use of banana fiber and currency notes thermally modified groups were evaluated for the production of plywood boards in industrial conditions. Formats of groups were treated at temperatures of 190 °C, 200 °C, 210 °C, and 215 °C for each 9 h to making the pulp process. By combining the treated and non-treated formats of veneer in types of board groups, thirteen different types of board were made. Analysis showed that the examined physical and mechanical properties were influenced by both the type of construction and the applied thermal treatment. Boards composed only of thermally modified group achieved the best results regarding moisture absorption and dimensional stability, and boards composed of the combined currency notes and banana fiber had better mechanical properties. As per the analysis of plywood board when used banana fiber used in pulp of plywood board is suitable at190 °C temperature rather than 215 °C temperature with comparing the other types of board. 25 °C temperature is less requires for control group board. We can consume cost of heat which is used in this process and getting the hard quality of plywood. At 215 °C temperature of processing cost of heat is 10% of plywood cost and when at 190°C of processing the cost of heat is 9.06% of plywood cost so that we can consume 0.94% cost of heat. Moisture content of temperature conditioned boards of control group is 9.01% density of conditioned boards 436.36 kg/m3. Highest bending strength and modulus of elasticity of boards is 48.07MPa and 6078 MPa in longitudinal direction and bending strength and modulus of elasticity of boards in cross-section 28.40MPa and 2027 MPa.