Repeat observations underpin our understanding of environmental processes, but financial constraints often limit scientists’ ability to deploy dense networks of conventional commercial instrumentation. Rapid growth in the Internet-Of-Things (IoT) and the maker movement is paving the way for low-cost electronic sensors to transform global environmental monitoring. Accessible and inexpensive sensor construction is also fostering exciting opportunities for citizen science and participatory research. Drawing on 6 years of developmental work with Arduino-based open-source hardware and software, extensive laboratory and field testing, and incorporation of such technology into active research programmes, we outline a series of successes, failures and lessons learned in designing and deploying environmental sensors. Six case studies are presented: a water table depth probe, air and water quality sensors, multi-parameter weather stations, a time-sequencing lake sediment trap, and a sonic anemometer for monitoring sand transport. Schematics, code and purchasing guidance to reproduce our sensors are described in the paper, with detailed build instructions hosted on our King’s College London Geography Environmental Sensors Github repository and the FreeStation project website. We show in each case study that manual design and construction can produce research-grade scientific instrumentation (mean bias error for calibrated sensors –0.04 to 23%) for a fraction of the conventional cost, provided rigorous, sensor-specific calibration and field testing is conducted. In sharing our collective experiences with build-it-yourself environmental monitoring, we intend for this paper to act as a catalyst for physical geographers and the wider environmental science community to begin incorporating low-cost sensor development into their research activities. The capacity to deploy denser sensor networks should ultimately lead to superior environmental monitoring at the local to global scales.
The value of Traditional Ecological Knowledge (TEK) for informing resource management has long been recognized; however, its incorporation into ecosystem services (ES) assessments remains uncommon. Often “top-down” approaches are utilized, depending on “expert knowledge”, that are not relevant to local resource users. Here we propose an approach for combining participatory methods with remote sensing to provide a more holistic understanding of ES change. Participatory mapping in focus group discussions identified TEK regarding what ES were present, where, and their value to communities. TEK was then integrated with satellite imagery to extrapolate to the landscape-scale. We demonstrate our method for Nyangatom communities in the Lower Omo Valley, Ethiopia, showing for the first time the ES impacts of regional environmental change, including the Gibe III dam, for communities in the Omo River basin. Results confirmed the collapse of flood-retreat cultivation associated with the loss of the annual Omo flood. Communities reported declines in many other provisioning ES, and these results were supported by satellite mapping, which showed substantial reductions in land covers with high ES value (shrubland and wetland), leading to consequent ES declines. Our mixed-methods approach has potential to be applied in other regions to generate locally relevant information for evaluating ES dynamics and improving management of natural resources.
Accurate hydrological data with high spatial resolution is important for flood risk and water resource management, particularly under the context of climate change. The cost of monitoring networks, as well as the characteristics of the hydrological environment itself, can be a barrier to meeting these data requirements, however. This study covers the design and testing of a low-cost, “build-it-yourself”, instream water depth sensor providing an assessment of its potential in future hydrological monitoring projects. The low-cost sensor was built using an Arduino microcontroller, a differential pressure sensor and a thermistor, a real-time clock, and an SD card module. The low-cost logger was deployed in tandem with a factory-calibrated Solinst®LevelLogger® 5 Junior for 6 months in the River Wissey, UK. We found the mean absolute error of the Arduino-based logger relative to the commercial setup to be ±0.69 cm for water depth and ±0.415 °C for water temperature. Economically, the Arduino-based logger offers an advantage, costing a total of £133.35 (USD 168.26 at time of publication) comparative to the industrial comparison’s cost of £408 (USD 514.83 at time of publication). This study concludes that the low cost of the Arduino-based logger gives a strong advantage to its incorporation in hydrological data collection, if the trade-offs (i.e., time investment and accuracy) are considered acceptable and appropriate for a project.
The purpose of this paper is to review the key analytical developments in international trans-boundary water politics and to shed light on the important, but overlooked, issue of ecosystems. The scholarship has gained greater breadth than the narrowly focused ‘water war’ discussion of two decades ago. The understanding of power and power relations has given greater nuance to why and how conflict and cooperation occur in international trans-boundary river basins. A new conceptual approach, the Transboundary Waters Interaction Nexus (TWINS), is discussed briefly to show how the analysis of coexisting conflict and cooperation provides an insight into the cross-sector linkages of water and the resulting interests and motives governing water use and allocation. However, it is argued that much of the literature is anthropocentric and frames the natural environment through a human lens. This paper calls for more attention to the ways in which the analytical framework on trans-boundary water interaction can include ecosystems as legitimate users. The paper concludes with some suggestions for future research and policy discussions.