Balancing electricity demand and supply remains a significant challenge for the power systems in developing countries, such as Nigeria. In Nigeria, there is a shortage of adequate power supply, and demand-side management (DSM) plays a minor role in the power balancing mechanism with load shedding being widely used. The paper aims to review and compare various existing and emerging DSM strategies in developing countries. An extensive and systematic review was conducted to evaluate potential solutions using DSM to increase the overall energy efficiency in the Nigerian electricity market. This study found that, although the technical and economic potentials of DSM vary in developed countries, the uptakes of DSM have been severely hampered hence preventing the full exploitation and utilisation of the full potential of DSM. The initiatives of a DSM model in Nigeria and other developing countries can play a significant role in addressing demand and supply challenges but an upgrade of the energy infrastructures, a reform of the market structure and the provision of financial incentives are required to allow for wide implementations of DSM strategies in developing countries.
This research paper aims to propose a through-life cost analysis model for estimating the profitability of renewable concentrated solar power (CSP) technologies. The financial outputs of the model include net present value (NPV) and benefit-cost ratio (BCR) of the project, internal rate of return (IRR) and discounted payback period (DPBP) of the investment, and levelized cost of energy (LCoE) from the CSP technology. The meteorological data for a specific location in the city of Tucson in Arizona is collected from a network of automated weather stations, and the NREL System Advisor Model (SAM) is applied to simulate hourly energy output of the CSP plant. An Excel spreadsheet tool is designed to calculate, in a bottom-up approach, the financial metrics required for approval of CSP projects. The model is tested on a 50 MW parabolic trough CSP plant and the results show an annual energy production of 456,351,232 kWh, NPV of over $64 million and LCoE of 0.16 $/kWh. Finally, a sensitivity analysis is performed to identify the factors which have the most significant effect on the economic performance of CSP technologies. The proposed model can provide valuable guidance to support the strategic planning and investment decision-making in CSP projects.
The lifetime of offshore foundations is governed by a combination of harsh environmental conditions and complex service loads. The fatigue limit state (FLS) analysis needs to be performed in the time domain to capture the complex phenomenon. This study aims to investigate different parameters and design modifications that can impact the design life of an offshore jacket foundation. An OC4 jacket foundation is designed in industrial software from DNV and reduced to a super-element model. The super-element model is connected to an NREL 5-MW wind turbine designed in Bladed. The time-series loads are used to compute the fatigue damages faced by the foundation during the service life. The impact of soil non-linearity, marine growth, scour size, the mass of the transition piece, and the grouted connection’s design on the dynamic response and fatigue damages are compared. A 30% increase in life was observed by replacing the concrete transition piece with a lightweight steel configuration. The fatigue damages were considerably greater for the inclined pile in the leg grouted connection than for the leg in the pile concept. The study provides a different perspective by analysing the effect of design parameters and design changes in the complex and computationally expensive time-series domain.