Ekaterina Serafimova

Prof. Dr. Ekaterina Serafimova

Department of Environmental Engineering, University of Chemical Technology and Metallurgy, Sofia, Sofia-Grad, Bulgaria
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2024 in Journal of Chemical Technology and Metallurgy
Verified
Journal Article
Open access
PDF file
Ekaterina SerafimovaEkaterina Serafimova
Ekaterina Serafimova
AMAsya Manoylova
Asya Manoylova
VSVilma Stoyanova
Vilma Stoyanova
The main part of companies in Bulgaria are built, however in the 70s, and upgraded last decade. The countrysupplies around 80 % of its supplies of paper, paperboard and pulp with own production. Integrated treatment ofwastes is a priority for realizing closed life cycle of materials. The aim of the present work is to investigate thecomposition and other important characteristics of biomass wood ash wasted from paper industry. The correlationsand associations among the chemical characteristics are also studied to find some basic trends and importantrelationships between two similar wastes from different enterprises. It was proved that all samples taken containedBa, Cr, Mn, Ni, Co, Al, Fe, Cu and Zn far below the legal limits for such type of products. A product has a certain anti-acidic effect. The other positive result was that the content of iron is between 34 to 60 mg per 1 kg dry waste. The microscopic photos confirmed that the particles are close to the nano-size materials. The content of the elements C, N, H is in good quantities and ratios, which is a prerequisite for their use as a soil improver. By the results of this study, it was confirmed that all samples produced as a result of the thermal treatment and final low water content achieved are free from pathogen microorganisms and different weed seeds, affecting the yield and soil sustainability. That allows determining the optimal ratio between the used components with a view to obtain products with desired thermal stability and physico-chemical properties as soil improvers.

3 January 2024 in Journal of Chemical Technology and Metallurgy
Verified
Journal Article
Open access
PDF file
Ekaterina SerafimovaEkaterina Serafimova
Ekaterina Serafimova
KDKremena Dedelyanova
Kremena Dedelyanova
Mining sector has been the central attention of the business and public policy sustainable development scheme for several years. Reclamation territories are with potential carbon sequestration capacity in degraded mining areas and can be an impeccable option for achieving sustainable development goal-13. This paper made an investigation about the presence of heavy metals in reclaimed area possibilities to improve reclaimed soils with biochar with idea to enhance ecosystem carbon pool and atmospheric CO2 sequestration capacity to offset CO2 emission and soil organic carbon losses. The results show that the carbon content in biochar is 46.6 % and would be classified in class 2 according to the International Biochar Initiative. H/C and O/C atomic ratios could be useful for restoration of degraded poor mine soils through enhanced carbon sequestration. O/C ratio is 0.085 mol mol–1 and half-life of biochar is 2795.65 years, which confirm the biochar stability. For each kilogram of biochar incorporated into the soil, 144 g of carbon were sequestrated 52,8 % CO2 emission reduction. Hence, the biochar developed in this study can be used in carbon-deficient soils with the added benefit of long-term carbon storage.

12 August 2025 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
Ekaterina SerafimovaEkaterina Serafimova
Ekaterina Serafimova
Vilma Petkova StoyanovaVilma Petkova Stoyanova
Vilma Petkova Stoyanova
AMAsya Manoylova
Asya Manoylova

26 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
Vilma Petkova StoyanovaVilma Petkova Stoyanova
Vilma Petkova Stoyanova
KMKaterina Veselinova Mihaylova
Katerina Veselinova Mihaylova
Ekaterina SerafimovaEkaterina Serafimova
Ekaterina Serafimova
RTRositsa Titorenkova
Rositsa Titorenkova
LTLiliya V. Tsvetanova
Liliya V. Tsvetanova
ATAndres Trikkel
Andres Trikkel
In this study, high-energy milled (HEM) samples of natural phosphorites from Estonian deposits were investigated. The activation was performed via planetary mill with Cr-Ni grinders with a diameter of 20 mm. This method is an ecological alternative, since it eliminates the disadvantages of conventional acid methods, namely the release of gaseous and solid technogenic products. The aim of the study is to determine the changes in the structure to follow the solid-state transitions and the isomorphic substitutions in the anionic sub-lattice in the structure of the main mineral apatite in the samples from Estonia, under the influence of HEM activation. It is also interesting to investigate the influence of HEM on structural-phase transformations on the structure of impurity minerals-free calcite/dolomite, pyrite, quartz, as well as to assess their influence on the thermal behavior of the main mineral apatite. The effect of HEM is monitored by using a complex of analytical methods, such as chemical analysis, powder X-ray diffraction (PXRD), wavelength-dispersive X-ray fluorescence (WD-XRF) analysis, and Fourier-transformed infrared (FTIR) analysis. The obtained results prove the correlation in the behavior of the studied samples with regard to their quartz content and bonded or non-bonded carbonate ions. After HEM activation of the raw samples, the following is established: (i) anionic isomorphism with formation of A and A-B type carbonate-apatites and hydroxyl-fluorapatite; (ii) solid-phase synthesis of calcium orthophosphate-CaHPO4 (monetite) and dicalcium diphosphate-β-Ca2P2O7; (iii) enhanced chemical reactivity by approximately three times by increasing the solubility via HEM activation. The dry milling method used is a suitable approach for solving technological projects to improve the composition and structure of soils, increasing soil fertility by introducing soluble forms of calcium phosphates. It provides a variety of application purposes depending on the composition, impurities, and processing as a soil improver, natural mineral fertilizer, or activator.

4 September 2025
Verified
Book Chapter
Open access
PDF file
Ekaterina SerafimovaEkaterina Serafimova
Ekaterina Serafimova
Vilma Petkova StoyanovaVilma Petkova Stoyanova
Vilma Petkova Stoyanova
Indoor air quality (IAQ) is particularly important in spaces intended for use by children, classrooms, and kindergartens. To investigate indoor air quality, passive sampling devices (Radiello) were used. Carbonyl compounds were measured twice a year in the field, from January to March and again from June to August in 2015, 2021, and 2024. This was done to learn more about the seasonality factor, health risks, the effect of the pandemic on pollutants, and the trend of exposure over 9 years. The data obtained show that the most widespread and highest-concentrated pollutant is formaldehyde. Researchers have discovered that these substances contribute to the development of cancer in humans. The topography of the distribution of formaldehyde and acetaldehyde is also important. The concentrations of these pollutants in the air at sites in the southeast are several times higher than those in the southwest. COVID-19 is associated with higher mortality in people exposed to long-term volatile organic compound (VOC) pollution. During this period, there is also a slight increase in the levels of carbonyl compounds in the air, followed by a decrease in this trend in 2024. Statistical data have been examined, and the expected risk due to residential exposure to lung cancer has been calculated. In many areas, it is above 10–4. It is advisable to avoid a combination of materials that leads to high levels of carbonyl concentration.

13 April 2026 in Materials
Verified
Journal Article
Open access
PDF file
Ekaterina SerafimovaEkaterina Serafimova
Ekaterina Serafimova
Vilma Petkova StoyanovaVilma Petkova Stoyanova
Vilma Petkova Stoyanova
VPVeneta Petkova
Veneta Petkova
In the era of increasing generation of various waste streams, the possibility of utilizing them as secondary resources is of utmost importance and fully corresponds to the goals of the circular economy. Industrial residues from the pulp and paper industry, such as biomass combustion ash (FARP) and sludge from industrial wastewater treatment (PPWS), together with natural zeolite as a modifying additive, represent valuable sources enabling their integrated valorization. The present study aims to investigate the potential for their reuse through the development of sustainable material blends. A comprehensive analysis of the chemical composition and morphology of the obtained mixtures was carried out using inductively coupled plasma optical emission spectroscopy (ICP-OES), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results indicate a tendency for the formation of mineral matrices dominated by calcium–sulfur–oxygen (Ca–S–O) phases, with the presence of calcium sulfate and aluminosilicate structures. The blends are associated with the formation of stable crystalline structures exhibiting potential pozzolanic activity. In this way, carbon is captured and fixed in a stable mineral form. The obtained results suggest the potential of these blends for use in low-carbon systems focused on waste valorization and carbon retention. The materials may be suitable for applications in construction, soil remediation, and environmental technologies, contributing to closing the resource loop “from farm to table and back again”.