We report on the successful functionalization of cotton fabrics with a water-stable metal–organic framework (MOF), UiO-66, under mild solvothermal conditions (80 °C) and its ability to adsorb and degrade water micropollutants. The functionalized cotton samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). UiO-66 crystals grew in a uniform and conformal manner over the surface of the cotton fibers. The cotton fabrics functionalized with UiO-66 frameworks exhibited an enhanced uptake capacity for methylchlorophenoxypropionic acid (MCPP), a commonly used herbicide. The functionalized fabrics also showed photocatalytic activity, demonstrated by the degradation of acetaminophen, a common pharmaceutical compound, under simulated sunlight irradiation. These results indicate that UiO-66 can be supported on textile substrates for filtration and photocatalytic purposes and that these substrates can find applications in wastewater decontamination and micropollutant degradation.
LaTiO2N photoanodes for solar water splitting were prepared by electrophoretic deposition and demonstrated the best photocurrents ever reported for this material. Further important enhancement of the performance was obtained by the use of a sputtered In2O3 overlayer.
Oxynitrides with the nominal composition LaTiO2N were prepared from a La2Ti2O7 precursor by thermal ammonolysis of the oxide under an NH3 flow for different durations t (4 – 30h). X-ray diffraction (XRD) indicated that phase-pure LaTiO2N samples were obtained when t ≥ 13h. The material was further characterised by scanning electron microscopy (SEM), surface area measurements based on the BET method, thermogravimetric analysis (TGA) and UV-visible diffuse reflectance spectroscopy (DRS). The powders displayed an increased crystallite size and a decreased surface area with increasing t. The ratio of N/(N+O) increased with t from 0.22 – 0.27. Correlated to this nitrogen increase, a small variation of the bandgap energy was observed from 2.19 to 2.12eV with t. All LaTiO2N samples oxidised H2O into O2 in the presence of an electron acceptor (Ag+). The O2 evolution was increased from 12μmol/h (t = 13h) to 22 – 24μmol/h (16h ≤ t ≤ 30h). It was found that the nitrogen content and the amount of defects played a key role in the photocatalytic O2 evolution