Farnoosh McDonagh

Dr. Farnoosh McDonagh

PRISM, Technological University of the Shannon: Midlands Midwest, Athlone, Ireland
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2022 in Polymer Engineering & Science
Verified
Journal Article
Open access
HDHossein Ramezani Dana
Hossein Ramezani Dana
FMFarnoosh McDonagh
Farnoosh McDonagh
Polylactic acid (PLA) is known as one of the greatest promising bioabsorbable and compostable polyesters with the capability of high molecular weight synthesis. Lactic acid condensation, azeotropic dehydration, and condensation ring‐open polymerize of lactide are three methods for PLA polymerization. Comprehension of material properties is critical for choosing the right processing method and adjusting PLA characteristics. A variety of mechanical properties of this material, from soft and elastic to stiff and high strength makes PLA suitable for a wide range of applications. Besides, PLA can be blended or copolymerized with other polymeric or non‐polymeric substances. Thus, this polymer can achieve suitable chemical, mechanical, and rheological properties. Understanding the role of these properties and selecting a suitable processing technique is necessary for its intended consumer and various applications. This study elaborated a general summary of the polymerization, processing, and characteristics of PLA (i.e., structural diversities, rheological performances, mechanical properties, and permeability). Besides, this work presented some information regarding essential factors that can be used for modifying PLA properties to address the requirements for various applications such as biomedical, food packing, biocomposite, and additive manufacturing.

13 July 2021 in International Journal of Polymeric Materials and Polymeric Biomaterials
Verified
Journal Article
Closed access
FMFarnoosh McDonagh
Farnoosh McDonagh
HRHossein Ramezani-Dana
Hossein Ramezani-Dana
Polylactic acid (PLA), one of the well-known bioabsorbable and compostable polyesters has rapidly evolved into a competitive commodity material over the last decades. To provide efficient therapy for the biomedical application domain understanding the PLA properties is the key tenets to achieve suitable chemical and biological properties. In most instances, PLA can be blended or copolymerized with other polymeric or nonpolymeric components. Devices made of PLA and its copolymers tend to slow degradation in vivo without inflammatory reaction and infection. This work intends to give an overview of the characterization and properties of PLA (i.e. crystallization behavior, physical properties, solubility and miscibility, degradation, and thermal properties). Also, we present some information about key elements to enhance PLA and its copolymers/composites/blends properties to optimize their fit with worldwide application requirements. This paper also emphasizes PLA applications in the pharmaceutical and biomedical industries, as well as recent PLA-based biomedical implant developed with Additive manufacturing (AM) devices. Graphical Abstract

3 July 2023 in Macromol
Verified
Journal Article
Open access
PDF file
MDMaurice Brendan Dalton
Maurice Brendan Dalton
FMFarnoosh McDonagh
Farnoosh McDonagh
HXHan Xu
Han Xu
KGKe Gong
Ke Gong
Gustavo FehrenbachGustavo Fehrenbach
Gustavo Fehrenbach
Ian MajorIan Major
Ian Major
The use of biodegradable polymers in tissue engineering has been widely researched due to their ability to degrade and release their components in a controlled manner, allowing for the potential regeneration of tissues. Melt blending is a common method for controlling the degradation rate of these polymers, which involves combining these materials in a molten state to create a homogenous mixture with tailored properties. In this study, polycaprolactone (PCL) was melt blended with hydrophilic poly (ethylene oxide) (PEO) of different molecular weights to assess its effect on PCL material performance. Hydrolytic degradation, thermal and viscoelastic properties, and surface hydrophilicity were performed to contrast the properties of the blends. DSC, DMA, and FTIR were performed on selected degraded PCL/PEO specimens following mass loss studies. The results showed that adding PEO to PCL reduced its melt viscosity-torque and melt temperature while increasing its hydrophilicity, optimizing PCL/PEO blend for soft tissue engineering applications and could contribute to the development of more effective and biocompatible materials for soft tissue regeneration.

3 February 2023 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
HXHan Xu
Han Xu
FMFarnoosh McDonagh
Farnoosh McDonagh
KGKe Gong
Ke Gong
ZCZhi Cao
Zhi Cao
EFEvert Fuenmayor
Evert Fuenmayor
Ian MajorIan Major
Ian Major
Since 3D printing allows for patient-specific dosage forms, it has become a major focus in pharmaceutical research. However, it is difficult to scale up drug product manufacturing. Injection molding has been used in conjunction with hot-melt extrusion to mass produce drug products, but making tailored solid dosage forms with this technology is neither cost-effective nor simple. This study explored the use of a combination of fused filament fabrication and injection molding to create patient-specific solid dosage forms. A tablet fixation and location template was used to overprint directly on injection-molded tablet bases, and theophylline was combined with polycaprolactone and Kollidon® VA64 via hot-melt extrusion to produce the filament. Dynamic mechanical analysis was used to evaluate the brittleness of the filament, and differential scanning calorimetry was used to analyze the thermal results. The results showed that theophylline had a flow promoting effect on the polymer blend and that overprinted tablets were manufactured faster than 3D-printed tablets. Drug release studies also showed that overprinted tablets released faster than injection-molded tablets. This method demonstrates the potential of hybrid manufacturing for the pharmaceutical industry as a means of bridging the gap between personalized dosage forms and mass production.

9 September 2023 in International Journal of Pharmaceutics
Verified
Journal Article
Open access
FMFarnoosh McDonagh
Farnoosh McDonagh
HXHan Xu
Han Xu
EFEvert Fuenmayor
Evert Fuenmayor
Ian MajorIan Major
Ian Major
Additive manufacturing (AM) possesses a transformative potential to revolutionize personalized medicine fabrication. Fused filament fabrication (FFF), an advanced AM technique, enables the development of tailored medicines with customizable dosages and controlled release properties. Nevertheless, filament prerequisites impose material limitations and present considerable challenges, necessitating a comprehensive evaluation of mechanical, rheological, and thermal characteristics to circumvent complications during the FFF process. Droplet deposition modeling (DDM), an innovative AM approach derived from injection molding (IM) technology, processes granulate feedstock to facilitate the production of personalized medicines. This study delves into the effects of FFF, DDM, and IM techniques on the release profiles of Hydrochlorothiazide, a widely employed drug for hypertension and edema treatment. By varying infill density, the investigation assesses the manufactured tablets using DDM and FFF methods. Our findings show that tablets made with FFF and DDM with identical infill densities had distinct microstructures, resulting in variable drug release profiles. Decreasing the infill densities resulted in higher sample porosity, leading to an accelerated drug release rate. A comparative analysis of drug release profiles from DDM and IM fabricated tablets demonstrated notable differences, despite DDM's origins in injection molding technology. This comprehensive study underscores the significance of not only infill densities but also the choice of manufacturing technique, as both factors can profoundly influence drug release profiles. By shedding light on these considerations, the research contributes to the ongoing advancement of personalized medicine through additive manufacturing technologies.

10 July 2024 in European Journal of Pharmaceutical Sciences
Verified
Journal Article
Open access
FMFarnoosh McDonagh
Farnoosh McDonagh
HXHan Xu
Han Xu
EFEvert Fuenmayor
Evert Fuenmayor
Ian MajorIan Major
Ian Major
Additive manufacturing (AM) enables the production of complex, lightweight, and customized components with superior quality. Selecting the right materials considering their thermal properties, printability, and layer adhesion is crucial in melting-based AM techniques. This study investigates Droplet Deposition Modelling (DDM), an innovative material extrusion process that utilizes thermoplastic granules. DDM is distinguished by its shorter manufacturing times and a wider range of materials, setting it apart from traditional material extrusion methods such as fused filament fabrication. We investigated the printability and part quality in DDM using two common pharmaceutical excipients: Polyvinylpyrrolidone/vinyl acetate 6:4 (PVP/VA), which is highly brittle, and Polycaprolactone (PCL), known for its low solubility and role in controlled drug release. Different ratios of PVP/VA and PCL were compounded via hot melt extrusion (HME) and used in DDM to study the impact of ingredient content on printability and part quality, employing geometrical models to assess material compatibility and printability. The study revealed that increasing PVP/VA content leads to higher viscosity, reduced flowability, and uneven deposition, with formulations of 80 % and 100 % PVP/VA showing poor processability. In contrast, formulations with 60 % and 40 % PVP/VA exhibited smooth processing and compatibility with DDM. We identified processing temperature and Drop Aspect Ratio (DAR) as key factors influencing material printability and part quality. Elevated processing temperatures and reduced DAR were found to increase interface temperatures, reduce diffusion, and potentially cause the 'elephant feet' issue. Additionally, smaller droplet sizes and material characteristics, such as higher interfacial tension in PCL, could lead to coalescence. Our findings highlight the complexities in optimizing DDM processing parameters and material blends, underscoring the need for careful formulation design to achieve high-quality 3D printed products.