A novel precast beam–column joint using shape memory alloy fibers-reinforced engineered cementitious composites (SMA-ECC) was proposed in this study to achieve self-repairing of cracks and internal damage after an earthquake. Three large-scale beam–column joints were tested under displacement reversals, including one monolithically cast conventional concrete joint, one engineered cementitious composites (ECC) reinforced precast concrete joint, and one SMA-ECC reinforced precast concrete joint. Failure mode, crack pattern, hysteretic behavior, stiffness degradation, displacement ductility, and energy dissipation capacity were compared and evaluated through a cyclic loading test. The test results showed that the ECC-based (ECC, SMA-ECC) precast joints have equivalent seismic properties to the monolithically cast concrete joint. ECC-based joints enhanced the ductility and energy dissipation capacity of the joint and, remarkably, reduced crack width. The SMA-ECC reinforced joint also exhibited instant self-healing in terms of the closure of small cracks after unloading. The self-healing performance was further evaluated through ultrasonic pulse tests, with the results showing that the use of SMA-ECC material was efficient in reducing the internal damage of beam–column joints after an earthquake.
This study investigated the effect of sustained loading on the cumulative damage of a newly developed smart cement-based self-healing composite material (SMA-ECC). SMA-ECC is composed of engineered cementitious composite (ECC) and shape memory alloy (SMA) fibers. A uniaxial compressive test with five predefined loading levels (0%, 30%, 40%, 50%, and 60% of compressive strength) was conducted on SMA-ECC hollow-cylindrical specimens and ECC control hollow-cylindrical specimens. The cumulative damage was mainly determined by changes in the total water absorption of different groups of specimens during three different periods (not loaded, at a predefined loading level, and after unloading). A normalized water content index was proposed to couple the effects of self-healing, sustained loading, and cumulative damage. The test results indicate that the cumulative water absorption of SMA-ECC was 35% lower than that of ECC, which may indicate less irreparable damage. In addition, the self-healing ability of SMA-ECC specimens under different compression load levels was evaluated through normalized water content analysis. SMA-ECC exhibited a 100% repair rate at load levels of 30% and 40%. At a higher load level of 60%, the repair rate of SMA-ECC was 76%. These results collectively emphasize the significant impermeability and self-healing performance of SMA-ECC after unloading.