Gaddafi Ismaili

Dr. Gaddafi Ismaili

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 November 2022 in Forests
Verified
Journal Article
Open access
PDF file
GIGaddafi Ismaili
Gaddafi Ismaili
EEEllyne Enduat
Ellyne Enduat
NYNur Syahina Yahya
Nur Syahina Yahya
FMFanthy Moola
Fanthy Moola
NJNoor Azland Jainudin
Noor Azland Jainudin
BRBiha Razali
Biha Razali
An effort was carried out to fully utilise fast-growing Acacia hybrid usage in the timber engineering field; however, the research data are still lacking. This paper aims to evaluate the physical and mechanical properties performance between untreated (control) and treated with 10% copper chrome arsenic of Acacia hybrid collected from Daikin Plantation Sdn. Bhd. Bintulu, Sarawak at air-dry condition at different age groups using the small clear method. Mechanical properties test refers to shear parallel to grain (tangential and radial directions), cleavage (tangential and radial directions), and tension parallel to grain test. Meanwhile, the physical properties test refers to moisture content (MC) and density test. After treatment, mechanical properties increase with an average of 13.67%; meanwhile, moisture content decreased with an average of 0.58% or 0.09% MC, and density slightly increased with an average of 0.44% or 0.002 g/cm3. Results indicate that 10-year-old Acacia hybrid exhibits the highest strength values in shear parallel to the grain, tension parallel to the grain, and cleavage, followed by 13-year-old and 7-year-old. Treated samples in the tangential direction performed better with consistent mean results than that of the untreated samples, while radial direction gave a high average strength increment when treated.

26 July 2023 in Forests
Verified
Journal Article
Open access
PDF file
NYNur Syahina Yahya
Nur Syahina Yahya
GIGaddafi Ismaili
Gaddafi Ismaili
MKMeekiong Kalu
Meekiong Kalu
MWMohd effendi Wasli
Mohd effendi Wasli
IOIskanda Openg
Iskanda Openg
KRKhairul Khuzaimah Abdul Rahim
Khairul Khuzaimah Abdul Rahim
The slow growth rate of primer species has affected the supply available to accommodate the market demand. To overcome these problems, a study was carried out to fully utilise fast-growing timber as the primary resource to ensure the demand for timber logs continues. This paper aimed to determine mechanical strength properties, treatability retention, and hazard classification of 7-, 10- and 13-year-old small-clear samples of Acacia mangium superbulk collected from Daiken Plantation Sdn. Bhd. Bintulu, Sarawak, following treatment with 10% copper chrome arsenic. As a result of this study, the maximum strength was obtained from the 10-year-old age group, with the modulus of rupture (MOR), the modulus of elasticity (MOE), and compression parallel to the grain values of small-clear treated Acacia mangium superbulk reaching 118.76 N/mm2, 15,020 N/mm2, and 57.82 N/mm2, respectively. In addition, the treatability retentions obtained were 149.27 L/m3, 147.25 L/m3, and 141.09 L/m3, which were recorded from the 7-, 10-, and 13-year-old samples, respectively. Meanwhile, the dry-salt retentions obtained from the 7-, 10- and 13-year-old samples were 14.93 kg/m3, 14.73 kg/m3, and 14.11 kg/m3, respectively. Hence, this species is classified as moderately difficult to treat under CCA (treatability retention: 80–160 L/m3) and is categorised under the hazard class of H4 (dry salt retention: 12–16 kg/m3).

23 June 2025 in Forests
Verified
Journal Article
Open access
PDF file
FMFanthy Moola Anak Malek
Fanthy Moola Anak Malek
GIGaddafi Ismaili
Gaddafi Ismaili
NJNOOR AZLAND BIN JAINUDIN
NOOR AZLAND BIN JAINUDIN
MKMeekiong Kalu
Meekiong Kalu
MWMohd effendi Wasli
Mohd effendi Wasli
SRSemilan Ripot
Semilan Ripot
Acacia hybrid is an important plantation species in Malaysia, but its use in structural applications is still limited due to the lack of comprehensive data on its engineering properties. This study evaluated the physical and mechanical properties of laminated or glulam Acacia hybrid timber in an air-dried condition for three age group combinations (7//10, 10//13, and 7//13 years old) to determine the optimal combination for structural applications. The results showed that the 10//13-year-old combination had the best mechanical performance, along with the highest basis density (0.7099 g/cm3), highest modulus of elasticity (MOE) (16,335.6 N/mm2), and highest parallel compressive strength (56.998 N/mm2), while the 7//10-year-old combination showed the highest moisture content (14.94%) and highest perpendicular compressive strength (8.9256 N/mm2). This study demonstrated that the combination of juvenile wood (7 years old) with mature wood (10 or 13 years old) increased strength by up to 43.06%, thus optimising the potential of Acacia hybrid in the construction industry. All combinations meet SG5 standards, with the 10//13-year-old combination recommended as the best choice for high-performance applications of glulam products.

29 May 2025 in Materials Science
Verified
Journal Article
Closed access
PDF file
GIGaddafi Ismaili
Gaddafi Ismaili
MSMohamad Yakub Bibi Suriani
Mohamad Yakub Bibi Suriani
IOIskanda Openg
Iskanda Openg
NYNur Syahina Yahya
Nur Syahina Yahya
ZIZurina Ismaili
Zurina Ismaili
Sarawak's wood-based industries face challenges due to a shortage of wood-based raw materials. Research on the Acacia hybrid species is limited, but it is crucial for the timber engineering field. Acacia hybrids have been selected for reforestation projects due to their rapid growth. Since 2001, various license holders have planted Acacia mangium and its hybrids on over 245,000 hectares in Sarawak. The species were collected from a plantation area owned by Daiken Sarawak Sdn Bhd. Tests on physical properties, namely moisture content (MC) and basic density, were carried out. Meanwhile, tests on mechanical properties for both untreated and treated samples were also conducted, including static bending tests (modulus of rupture, MOR and modulus of elasticity, MOE) and compression parallel to the grain test. All the tested samples were in air-dry condition, with the MC ranging from 12 % to 19 %. The specimens were prepared according to BS 373:1957 and Method of Testing Small Clear Specimens of Timber. All tested results were analyzed using statistical methods to determine mean results. All the results that had been tested were analyzed using statistical analysis as mean results. Comprehensive testing of Acacia hybrid wood treated with copper chrome arsenic (CCA) has significantly improved its physical and mechanical properties. The treatment results in higher density and strength, influenced by growth and structural variations of the wood. It also enhances moisture retention, boosting the wood's hydrophobic properties and durability. Treated wood shows increased Modulus of Rupture (MOR) and Modulus of Elasticity (MOE) in static bending tests, demonstrating enhanced resistance to bending and structural integrity. Compression tests reveal that treated wood is 27% stronger than untreated, confirming its superior ability to withstand compressive forces. From this study, the best age combination product is 10y+10y, and it can be concluded that the comprehensive testing of Acacia hybrid wood reveals treatments enhance its physical and mechanical properties.

30 April 2026 in Forests
Verified
Journal Article
Open access
PDF file
NJNOOR AZLAND BIN JAINUDIN
NOOR AZLAND BIN JAINUDIN
GIGaddafi Ismaili
Gaddafi Ismaili
FRFaisal Amsyar Redzuan
Faisal Amsyar Redzuan
AJAhmad Fadzil Jobli
Ahmad Fadzil Jobli
IOIskanda Bin Openg
Iskanda Bin Openg
MMMohamad Asrul Mustapha
Mohamad Asrul Mustapha
This bibliometric study examined 179 Scopus-indexed publications on the physical and mechanical properties of medium-density fiberboard (MDF) published between 2016 and 2025. BiblioMagika® was used for performance analysis, and Biblioshiny was used for keyword co-occurrence, thematic mapping, and thematic evolution. The papers identified as the cohort for analysis had received 2830 citations in total, with an average of 15.81 citations per paper, and an average h-index of 30. The European Journal of Wood and Wood Products and BioResources were the most productive sources. Three distinct categories were identified through keyword mapping among the studies reviewed: (1) advanced composites and reinforcement, (2) adhesive and emission-related studies, and (3) circular-material strategies. Thematic evolution showed a trend away from traditional resin-performance topics toward broader sustainability-related themes, particularly bio-based adhesives and recycling-related topics. Overall, this review provides a quantitative overview of publication patterns, influential sources, and thematic development in MDF research. It also provides direction for future MDF research, focusing on durability, large-scale feasibility, life-cycle assessments, and practical implementation.