Gajendra Singh Chawda

Prof. Gajendra Singh Chawda

Department of Electrical and Computer Engineering, Tuskegee University, Tuskegee, Alabama, USA
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2020 in IEEE Access
Verified
Journal Article
Open access
Gajendra Singh ChawdaGajendra Singh Chawda
Gajendra Singh Chawda
ASAbdul Gafoor Shaik
Abdul Gafoor Shaik
MSMahmood Shaik
Mahmood Shaik
SPSanjeevikumar Padmanaban
Sanjeevikumar Padmanaban
JHJens Bo Holm-Nielsen
Jens Bo Holm-Nielsen
PKPalanisamy Kaliannan
Palanisamy Kaliannan
The global concern with power quality is increasing due to the penetration of renewable energy (RE) sources to cater the energy demands and meet de-carbonization targets. Power quality (PQ) disturbances are found to be more predominant with RE penetration due to the variable outputs and interfacing converters. There is a need to recognize and mitigate PQ disturbances to supply clean power to the consumer. This paper presents a critical review of techniques used for detection and classification PQ disturbances in the utility grid with renewable energy penetration. The broad perspective of this review paper is to provide various concepts utilized for extraction of the features to detect and classify the PQ disturbances even in the noisy environment. More than 220 research publications have been critically reviewed, classified and listed for quick reference of the engineers, scientists and academicians working in the power quality area.

8 June 2020 in IEEE Access
Verified
Journal Article
Open access
Gajendra Singh ChawdaGajendra Singh Chawda
Gajendra Singh Chawda
ASAbdul Gafoor Shaik
Abdul Gafoor Shaik
Om Prakash MahelaOm Prakash Mahela
Om Prakash Mahela
Sanjeevikumar PadmanabanSanjeevikumar Padmanaban
Sanjeevikumar Padmanaban
JHJens Bo Holm-Nielsen
Jens Bo Holm-Nielsen
Rapid industrialization and its automation on the globe demands increased generation of electrical energy with more reliability and quality. Renewable energy (RE) sources are considered as a green form of energy and extensively used as an alternative source of energy for conventional energy sources to meet the increased demand for electrical power. However, these sources, when integrated to the utility grid, pose challenges in maintaining the power quality (PQ) and stability of the power system network. This is due to the unpredictable and variable nature of generation by these sources. The distributed flexible AC transmission system (DFACTS) devices such as distributed static compensator (DSTATCOM) and dynamic voltage restorer (DVR) play an active role in mitigating PQ issues associated with RE penetration. The performance of DFACTS devices is mostly dependent on the type of control algorithms employed for switching of these devices. This paper presents a comprehensive review of various conventional and adaptive algorithms used to control DFACTS devices for improvement of power quality in utility grids with RE penetration. This review intends to provide a summary of the design, experimental hardware, performance and feasibility aspects of these algorithms reported in the literature. More than 170 research publications are critically reviewed, classified, and listed for quick reference for the advantage of engineers and academician working in this area.

1 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gajendra Singh ChawdaGajendra Singh Chawda
Gajendra Singh Chawda
Om Prakash MahelaOm Prakash Mahela
Om Prakash Mahela
NGNeeraj Gupta
Neeraj Gupta
Mahdi KhosravyMahdi Khosravy
Mahdi Khosravy
Tomonobu SenjyuTomonobu Senjyu
Tomonobu Senjyu
In practical operating conditions, the Solar-Photo Voltaic (SPV) system experiences multifarious irradiation and temperature levels, which generate power with multiple peaks. This is considered as the nonuniform operating condition (NUOC). This requires accurate tracking of global power peaks to achieve maximum power from SPV, which is a challenging task. Hence, this paper presents an incremental Conductance based Particle Swarm Optimization (ICPSO) algorithm for accurate tracking of maximum global power from active power multiple peaks generated by the SPV. The proposed algorithm continuously adjusts the individual particle’s weight component, which depends on its distance from the global best position during the tracking process. The proposed algorithm has the merit of continuous adjustment of weight components which reduces active power oscillations at the optimal global position area. Proposed ICPSO algorithm has been successfully designed and implemented for Solar-photo voltaic (PV) under nonuniform operating condition. It is established that the proposed algorithm enhances the output power of the Solar-PV up to 7% with the maximum power tracking of 0.1 s compared to other maximum power point tracking algorithms.

18 August 2021 in IEEE Transactions on Sustainable Energy
Verified
Journal Article
Closed access
Gajendra Singh ChawdaGajendra Singh Chawda
Gajendra Singh Chawda
ASAbdul Gafoor Shaik
Abdul Gafoor Shaik
Wind Energy (WE) penetration levels in rural grids are limited due to the Power Quality (PQ) issues owing to the inconsistency in the wind speed and low short circuit ratios. This is further aggravated due to the day-by-day increase in non-linear loads. This paper proposes a methodology to enhance WE penetration levels by mitigating PQ issues using distribution static compensator (DSTATCOM) controlled by the Adaptive Linear Element-Least Mean Square (ADALINE-LMS) algorithm. The proposed adaptive control algorithm estimates the active and reactive weight components of load currents by considering the changes in wind generation, DC-link voltage and grid voltage. These weights are used to generate reference current signals to switch the DSTATCOM to mitigate PQ disturbances. The proposed method has been implemented for the enhancement of WE penetration in the rural grid under the non-linear load. The results obtained by simulation in MATLAB studies have been validated using the experimental studies. These studies established the effectiveness of the proposed method for enhancing WE penetration level in rural grid up to 25%.

19 October 2022 in IEEE Transactions on Smart Grid
Verified
Journal Article
Closed access
Gajendra Singh ChawdaGajendra Singh Chawda
Gajendra Singh Chawda
ASAbdul Gafoor Shaik
Abdul Gafoor Shaik
The intermittency associated with Wind Energy causes Power Quality (PQ) disturbances, which in turn can limit the penetration levels. These penetration levels are further restricted due to the non-linear (NL) loads and the weakness of the grid (especially in the rural grid). This paper proposes a methodology to enhance wind power penetration levels into the rural grid by mitigating PQ disturbances using a DSTATCOM controlled by Adaptive Least Mean Fourth (ALMF) control. The proposed algorithm computes the active and reactive load current components with the help of updated weights by continuously adapting the changes in grid voltages, wind speed and DC-link voltage to generate reference currents, which are used to generate switching signals for the DSTATCOM. Various case studies establish the effectiveness of the proposed algorithm in MATLAB simulation and experimentally to enhance the wind energy penetration level up to 25% into the rural grid with a short circuit ratio as low as 2.74 in the presence of NL loads.

15 March 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Gajendra Singh ChawdaGajendra Singh Chawda
Gajendra Singh Chawda
ASAbdul Gafoor Shaik
Abdul Gafoor Shaik
Om Prakash MahelaOm Prakash Mahela
Om Prakash Mahela
Sanjeevikumar PadmanabanSanjeevikumar Padmanaban
Sanjeevikumar Padmanaban
Wind energy (WE) is emerging as a green and clean energy source. The power quality (PQ) significantly deteriorates when WE sources are connected to the weak ac grid. This is due to the variable wind speed, the impedance of weak grids, and nonlinear loads. This article proposes a methodology to improve the PQ in the weak grid with WE penetration using additional distribution static compensator (DSTATCOM). Fuzzy logic (FL) controller is implemented in the conventional synchronous reference frame (SRF) scheme to minimize the oscillations in the voltage signals. Also, a feedforward block of the WE source is incorporated in the FLSRF control scheme for adapting changes associated with the wind speed. The proposed control scheme accommodates the changes related to the grid’s strength, wind speed, load currents, and dc-link voltage dynamics to estimate the switching signals for the DSTATCOM. The MATLAB simulation and experimental studies established the effectiveness of the proposed method for enhancing the PQ performance of weak grid-connected WE sources in the presence of nonlinear loads.