Conservation agriculture (CA) practices are advocated to reduce soil degradation, resulting in more sustainable food production as compared to conventional tillage (CT). In this study, the short-term effects of two tillage systems in combination with cropping patterns on selected soil physical parameters on four experimental sites in Mozambique were studied. The study sites differ according to their climatic conditions, soil types, and crop adaptation. Tillage systems evaluated were CA and CT, while the cropping pattern had four levels of sole cropping and three levels of intercropping. In general, soil physical properties showed significant changes due to the tillage systems, but the cropping pattern and their interaction with tillage systems did not yield significant impacts on the soil physical properties. CA increased bulk density, penetration resistance, and saturated hydraulic conductivity as compared to CT. A significant difference due to the tillage system was observed across the four sites, and in general, evaporation was higher in CT compared to CA. The presence of crop residues in CA contributed to lower evaporation. Thus, in the short term, CA practices could be a sustainable option to conserve soil water through higher infiltration and less evaporation.
Sub-Saharan Africa (SSA) agriculture is characterized by dependence on erratic rainfall, inadequate conservation practices, and a decline in soil fertility resulting in low crop productivity. Therefore, conservation agriculture (CA) has been proposed as an alternative to improve soil fertility and productivity. Hence the aim was to investigate the effects of tillage systems, fertilization, and cropping patterns on selected soil chemical properties (pH, organic carbon, total nitrogen, extractable phosphorus, exchangeable cations, and cation exchange capacity) and identify which cropping pattern maximizes stover and grain maize–legume productivity and land use. A two-year (2016/17–2017/18) field experiment in a loamy sand soil was conducted at Nhacoongo Research Station, southern Mozambique. Two tillage systems (conservation (CA) and conventional tillage (CT)), two fertilization treatments (fertilized and unfertilized), and seven cropping patterns (four sole crops and three maize–legume intercrops) were evaluated in a randomized complete block design with split–split plot arrangement and replicated four times. CA practices resulted in significantly higher soil chemical properties and increased stover and grain yields as compared to CT practices, but fertilization demonstrated insignificant effects on soil chemical properties and significant influences on stover and grain yield of maize and legumes. Cropping patterns induced no significant effect on soil chemical properties and either stover or grain yield. Estimated indices like land equivalent ratio (1.18–2.67) and competitive ratio index (0.01–1.72) confirmed the advantage of intercropping against sole cropping. This is largely supported by the estimated values of aggressivity and relative crowding coefficient. Smallholder farmers can therefore benefit by adopting CA.
4 August 2016 in South African Journal of Plant and Soil
In South Africa, maize is often produced on highly weathered soils with low organic matter contents. These soils are unable to supply sufficient nitrogen (N) and phosphorus (P) for sustainable maize production, resulting in the use of fertiliser sources containing either N or P. In some instances, however, the efficiency of these sources may be questioned. In a glasshouse pot experiment, young maize aerial plant material was analysed to evaluate the effect of band-applied N sources, P sources and P application rates on the quantitative nutrient concentration, as well as uptake of several nutrients. With the exception of potassium uptake, all parameters were significantly affected by the main effects only. Nutrient concentration measurements were inconsistent for N sources. However, total uptake proved to be more efficient with the application of limestone ammonium nitrate compared with that of urea. Both nutrient concentration and uptake were greater with the application of the orthophosphate sources monoammonium phosphate and nitrophosphate compared with the polyphosphate source ammonium polyphosphate. The 40 kg P ha−1 application enhanced the uptake of N, P, calcium, sulphur and boron. No applications of P lead to increased N, magnesium, copper and zinc concentrations.
7 April 2016 in South African Journal of Plant and Soil
Understanding the nutrient requirements of maize is especially important during early vegetative growth and development, particularly when produced on highly weathered soils with low organic matter contents. Therefore, the growth response of maize to different nitrogen (N) sources viz. limestone ammonium nitrate and urea, phosphorus (P) sources viz. monoammonium phosphate, nitrophosphate and ammonium polyphosphate, as well as P application levels viz. 0, 10, 20, 30 and 40 kg ha−1 during early growth were evaluated. In pot trials with a sandy loam topsoil, aerial and subsoil plant parameters were measured to evaluate the effect of treatment and treatment combinations of P and N fertilisers on the vegetative growth and development of maize during the first five weeks after emergence. Plants treated with limestone ammonium nitrate had significantly greater plant parameter measurements compared with urea, primarily ascribed to immediate availability after application in addition to ease of uptake. Monoammonium phosphate and nitrophosphate (orthophosphate sources) yielded significantly greater aerial measurements compared with ammonium polyphosphate (polyphosphate source). Differences in subsoil plant parameter results for P source were not that clear. Aerial and subsoil plant parameter measurements were overall significantly greater with P applied at 40 kg ha−1 than the majority of lesser application rates.
15 March 2022 in South African Journal of Plant and Soil
Commercial humates manufactured from oxidised lignites are often recommended to improve soil condition and crop growth. The benefits ascribed to these products are questioned, since they differ from humates that exist naturally in soils. Growth chamber, glasshouse and field experiments were conducted at facilities of the University of the Free State to quantify the influence of three potassium (K)-humate products on irrigated wheat growth and development, in loamy sand, sandy clay loam and clay loam soils. The humate products were applied to the soils at rates prescribed by their promoters. Results showed that the K humates were not beneficial for wheat growth and development as indicated by above-ground and subsoil plant parameters at tillering, stem elongation and maturity. However, the application of the K-humates caused higher bacteria and fungi counts in soil, which differed between the products applied. Despite the higher counts of bacteria and fungi in soil, grain yields were not affected, probably because no improvement in soil chemical properties were observed. Therefore, the application of K-humate products is not necessarily economically viable since they are relatively expensive. However, foliar applications of K humates may have stimulatory effects on wheat growth and development, resulting in better grain yields that could justify the higher production cost. An investigation into this aspect is suggested.
15 March 2021 in South African Journal of Plant and Soil
Maize is the most important crop produced for human and animal nourishment in South Africa. The crop is susceptible to zinc (Zn) deficiencies, which result in lower grain yields with poorer nutritional value. Knowledge of the nature and behaviour of Zn fertilisers is therefore important for sustainable maize production, especially in sandy soils. The aim of this incubation study was to test the effect of inorganic (ZnO, ZnCl2, ZnCO3 and ZnSO4) and chelated (ZnEDTA, ZnDTPA, ZnEDDHA and ZnHEDTA) sources of Zn applied at different rates on Zn extracted by diluted HCl, DTPA, Mehlich-1, Ambic-2 and Na2EDTA methods. Analyses showed that ZnO was the least effective source, and ZnSO4 was the most effective source at increasing the extractable Zn of sandy soils. The extractable Zn content of the soils increased almost linearly with increasing application rates of all the zinc sources. Generally, the Na2EDTA method was most efficient in extracting the applied Zn. These results must be validated with crop growth response in glasshouse and especially field studies.