Guoxing Liang

Prof. Guoxing Liang

Taiyuan University of Technology, Taiyuan, Shanxi, China

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2018 in Materials
Verified
Journal Article
Open access
PDF file
GLGuoxing Liang
Guoxing Liang
Siegfried SchmauderSiegfried Schmauder
Siegfried Schmauder
MLMing Lv
Ming Lv
YSYanling Schneider
Yanling Schneider
CZCheng Zhang
Cheng Zhang
YHYang Han
Yang Han
Friction and wear tests were performed on AISI 1045 steel specimens with different initial roughness parameters, machined by a creep-feed dry grinding process, to study the friction and wear behavior on a pin-on-disc tester in dry sliding conditions. Average surface roughness (Ra), root mean square (Rq), skewness (Rsk) and kurtosis (Rku) were involved in order to analyse the influence of the friction and wear behavior. The observations reveal that a surface with initial roughness parameters of higher Ra, Rq and Rku will lead to a longer initial-steady transition period in the sliding tests. The plastic deformation mainly concentrates in the depth of 20–50 μm under the worn surface and the critical plastic deformation is generated on the rough surface. For surfaces with large Ra, Rq, low Rsk and high Rku values, it is easy to lose the C element in, the reciprocating extrusion.

27 April 2017 in Materials
Verified
Journal Article
Open access
PDF file
JAJing An
Jing An
JSJinpeng Song
Jinpeng Song
GLGuoxing Liang
Guoxing Liang
JGJiaojiao Gao
Jiaojiao Gao
JXJuncai Xie
Juncai Xie
MLMing Lv
Ming Lv
The effects of HfB2 and HfN additions on the microstructures and mechanical properties of TiB2-based ceramic tool materials were investigated. The results showed that the HfB2 additive not only can inhibit the TiB2 grain growth but can also change the morphology of some TiB2 grains from bigger polygons to smaller polygons or longer ovals that are advantageous for forming a relatively fine microstructure, and that the HfN additive had a tendency toward agglomeration. The improvement of flexural strength and Vickers hardness of the TiB2-HfB2 ceramics was due to the relatively fine microstructure; the decrease of fracture toughness was ascribed to the formation of a weaker grain boundary strength due to the brittle rim phase and the poor wettability between HfB2 and Ni. The decrease of the flexural strength and Vickers hardness of the TiB2-HfN ceramics was due to the increase of defects such as TiB2 coarse grains and HfN agglomeration; the enhancement of fracture toughness was mainly attributed to the decrease of the pore number and the increase of the rim phase and TiB2 coarse grains. The toughening mechanisms of TiB2-HfB2 ceramics mainly included crack bridging and transgranular fracture, while the toughening mechanisms of TiB2-HfN ceramics mainly included crack deflection, crack bridging, transgranular fracture, and the core-rim structure.

26 August 2021 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
DLDonggang Liu
Donggang Liu
GLGuoxing Liang
Guoxing Liang
XHXinhui Hao
Xinhui Hao
YHYonggui Huang
Yonggui Huang
GLGuang Li
Guang Li
OTOjiako Princewill Tochukwu
Ojiako Princewill Tochukwu

18 January 2022 in Molecules
Verified
Journal Article
Open access
PDF file
JRJie REN
Jie REN
HYHaibao Yue
Haibao Yue
GLGuoxing Liang
Guoxing Liang
MLMing Lv
Ming Lv
In this paper, the influence of tool shape on the surface quality of monocrystalline nickel nanofabrication is studied. The research mainly adopts the method of molecular dynamics simulation, through the statistics of the atomic coordinates of the machined surface, then calculates the influence of different tool rake angles on the surface roughness of monocrystalline nickel. It is concluded that the surface roughness distribution is ‘W’ when the rake angle of the diamond tool changes from −45° to +45°. When analyzing the relationship between the tool shape and the processing temperature, it is found that when the clearance angle of the tool reaches a certain range, the clearance angle is further increased, and the temperature of the workpiece does not change during machining. Therefore, a large number of simulations were carried out, and it was concluded that there is a critical clearance angle, and the critical clearance angle of the tool in the research conditions is 8–10°.

4 August 2021 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
GLGuang Li
Guang Li
GLGuoxing Liang
Guoxing Liang
XSXingquan Shen
Xingquan Shen
MLMing Lv
Ming Lv
DLDonggang Liu
Donggang Liu
MAMohammed Al-Nehari
Mohammed Al-Nehari

3 July 2025 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
SYShiqing Yang
Shiqing Yang
GLGuoxing Liang
Guoxing Liang
YHYonggui Huang
Yonggui Huang
JZJian Zhao
Jian Zhao
XHXinhui Hao
Xinhui Hao
MLMing Lv
Ming Lv