Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

Nowadays, the preservation and restoration of a historical building needs to be faced in accordance with a novel sensibility regarding the environment in order to preserve the building for future generations. In this context, the scientific community is focusing on novel and sustainable materials and techniques that allow for durability and mechanical performance as well as compatibility with the existing heritage. Alkali-activated materials represent a great challenge to the production of new materials, starting from the existing ones, with the goal of reducing consumption, emission of greenhouse gases and environmental impact. This study deals with the valorisation of waste materials coming from demolition and construction activities in the manufacture of geocomposites suitable for the restoration and conservation of historical heritage. In particular, waste from tuff sawing and brick grinding were used as raw materials, and then the geopolymeric samples produced were characterized based on a physical-chemical and mechanical point of view in order to investigate their performance and evaluate their suitability as materials for a historical building’s recovery. The results showed that brick waste-based geocomposites were more compact than the tuff-based ones, as shown by the higher-density values and the lower values of open porosity and water absorption and as further confirmed by the trend of the mechanical performance. Moreover, experimental data showed that the physical and mechanical properties of both bricks and tuff waste-based geocomposites, even with different waste content, are compatible with existing building materials as well as traditional repairing products.

Today’s global context poses ongoing challenges that can be addressed by implementing a systemic and strategic approach directed toward climate-resilient cities. During times of energy and digital transition, managing climate risks involves analysing sector-specific impacts and fostering a shared commitment at the national and international levels; in this sense, European programs promote the dissemination of good practices and implementation of projects and tools to improve the resilience of communities to climate challenges. This paper examines the Naples municipality as a case study within the SEACAP 4 SDG capitalization project in the implementation of innovative governance support tools for hazard and climate adaptation, mitigation, and energy rehabilitation to enhance local governance, planning, and design strategies towards a sustainable and low-emission future. Within the creation of a living lab, tools were selected as part of the project, and training sessions were held targeting key stakeholders. The training aimed to form and inform key players about the tools’ potential, leading to their incorporation into the municipality’s strategic action plan for future implementation. This case study has a high repeatability and stands as a starting point for the implementation of this approach in numerous other local municipalities.

Nowadays the preservation and restoration of historical building needs to be faced in accordance with a novel sensibility regarding environment to preserve the future generations. In this context, the scientific community is focusing on novel and sustainable materials and techniques allowing durability and mechanical performances and at the same time compatibility with the existing heritage. Alkali activated materials represent a great challenge to produce new materials starting from the existing ones with reducing consumption, emission of greenhouse gases and environmental impact. This study deals with the valorization of waste materials coming from demolition and construction activities in the manufacture of geocomposites suitable for restoration and conservation of historical heritage. In particular, waste from tuff sawing and brick grinding were used as raw materials, then the geopolymeric samples produced were characterized from physical-chemical and mechanical point of view in order to investigate their performance and evaluate their suitability as materials for historical buildings recovery. Brick waste based geocomposites resulted to be more compact than the tuff-based ones as showed by the higher density values and the lower values of open porosity and water absorption and as further confirmed by the trend of the mechanical performance. Moreover, experimental data showed that physical and mechanical properties of both bricks and tuff waste-based geocomposites, even with different waste content, are compatible with existing building materials and to all the traditional repairing products.

Geopolymer technology is considered a strategic alternative for recycling construction and demolition waste (CDW) and to produce new construction products which meet the requirements of environmental and energy sustainability. The separation and management of CDW fractions is still a technological complex process and, even if large-scale separation technology is quite common, the necessity to perform this treatment may reduce the environmental and economic benefits of CDW reuse. So, a very promising option is represented by the manufacturing of geopolymers using unseparated CDW. In this aim, waste deriving from cement-based mortars, bricks and natural stones have been selected and widely characterized from a mineralogical, chemical and morphological point of view. Then, geopolymer mortars were produced using several amounts of either a single fraction or a mixture of the selected waste. The chemical, physical, mechanical, and microstructural characterization of the geopolymer-produced mortars was carried out to assess how the combination and different quantities of the mixed CDW affected the final properties. In particular, geopolymeric mortars produced from the unselected CDW showed higher mechanical properties, despite the lower apparent density, when compared to geopolymeric mortars produced from single fractions of CDW. The improvement of mechanical features seems to be not affected by the waste amount used, providing encouraging findings to promote the actual use of unseparated CDW with the resulting enhancement of environmental and economic benefits.