Aluminum bronze is a complex group of copper-based alloys that may include up to 14% aluminum, but lower amounts of nickel and iron are also added, as they differently affect alloy characteristics such as strength, ductility, and corrosion resistance. The phase transformations of nickel aluminum–bronze alloys have been the subject of many studies due to the formations of intermetallics promoted by slow cooling. In the present investigation, quaternary systems of aluminum bronze alloys, specifically Cu–10wt%Al–5wt%Ni–5wt%Fe (hypoeutectoid bronze) and Cu–14wt%Al–5wt%Ni–5wi%Fe (hypereutectoid bronze), were directionally solidified upward under transient heat flow conditions. The experimental parameters measured included solidification thermal parameters such as the tip growth rate (V_L) and cooling rate (T_R), optical microscopy, scanning electron microscopy (SEM) analysis, hardness, and microhardness. We observed that the hardness and microhardness values vary according to the thermal parameters and solidification. We also observed that the Cu–14wt%Al–5wt%Ni–5wi%Fe alloy presented higher hardness values and a more refined structure than the Cu–10wt%Al–5wt%Ni–5wt%Fe alloy. SEM analysis proved the presence of specific intermetallics for each alloy.

Metals solidification involves the transformation of the molten metal back into the solid state. Solidification structures impact heavily on the final product's characteristics. The microstructure effects on metallic alloys properties have been highlighted in various studies and particularly the dendrite arm spacing influence upon the mechanical properties such as tensile strength has been reported. In the present investigation, Al-10wt%Si-2wt%Cu and Al-10wt%Si-5wt%Cu alloys were directionally solidified upward under transient heat flow conditions. The experimental results include solidification thermal parameters such as tip growth rate and cooling rate, optical microscopy, volume fraction of the eutectic mixture, primary dendritic arm spacing and ultimate tensile strength. Experimental growth laws of primary dendrite arm spacing as a function of the solidification thermal parameters are proposed. The Hall-Petch mathematical expressions were used to correlate the ultimate tensile strength as a function of the primary dendritic arm spacing. It was found that the alloy with higher copper content had a more refined structure. More refined structures had higher ultimate tensile strength values.