The next generation phased array radio telescopes, such as the Square Kilometre Array (SKA) low frequency aperture array, suffer from RF interference (RFI) because of the large field of view of antenna element. The classical station beamformer used in SKA-low is resource efficient but cannot deal with the unknown sidelobe RFI. A real-time adaptive beamforming strategy is proposed for SKA-low station, which trades the capability of adaptive RFI nulling at an acceptably cost, it doesn’t require hardware redesign but only modifies the firmware accordingly. The proposed strategy uses a Parallel Least Mean Square (PLMS) algorithm, which has a computational complexity of $4N+2$ and can be performed in parallel. Beam pattern and output SINR simulation results show deeply nulling performance to sidelobe RFI, as well as good mainlobe response similar to the classical beamformer. The convergence performance depends on the signal-and-interference environments and step size, wherein too large a step size leads to a non-optimal output SINR and too small a step size leads to slow convergence speed. FPGA implementation demonstrations are implemented and tested on a NI FPGA module, and test results demonstrate good real-time performance and low slice resource consumption.

A novel CMOS image sensor (CIS) pinned photodiode (PPD) pixel, named as O-T pixel, is proposed and investigated by TCAD simulations. Compared with the conventional PPD pixel, the proposed pixel features the overlapping gate (OG) and the temporary storage diffusing (TSD) region, based on which the several-nanosecond-level charge transfer could be achieved and the complete charge transfer from the PPD to the floating node (FD) could be realized. And systematic analyses of the influence of the doping conditions of the proposed processes, the OG length, and the photodiode length on the transfer performances of the proposed pixel are conducted. Optimized simulation results show that the total charge transfer time could reach about 5.862 ns from the photodiode to the sensed node and the corresponding charge transfer efficiency could reach as high as 99.995% in the proposed pixel with 10 μm long photodiode and 2.22 μm long OG. These results demonstrate a great potential of the proposed pixel in high-speed applications.

A broadband hybrid muti-beamforming system applicable to SKA Mid-Frequency Aperture Array is presented in this paper. The hybrid beamforming system adopts a two-stage architecture that combines analog and digital beamforming. The analogue beamforming subsystem is able to provide a 16-element tile with 2~16 simultaneous beams covering ±45° spatial area and a flexible beam-selection capability by using a true-time delay and chessboard switching structure. The second-stage beamforming then produces beams in a full digital way within each input analog beam by CTPM that implements analog to digital converting, channelizer and digital beamforming.