Biomass fuels are increasingly being viewed as viable alternatives for energy production in biomass-fired power plants and coal-fired power plants, which aim to employ co-firing technologies to achieve CO2 emission reductions. In this study, wood pellets (woody biomass) and kenaf (herbaceous biomass) were fully characterized in terms of their elemental compositions, pyrolysis, and char oxidation kinetics. Kinetic parameters were obtained through the application of the multi-Gaussian distributed activation energy model (DAEM) and Kissinger equation. Analyses of the ash indicated that, unlike coal, the biomass fuel is mostly composed of metal oxide ash. The calorific values of wood pellets were slightly higher than those of kenaf. Detailed kinetic analyses are presented so that steps can be taken to combust the biomass fuels in power plants. The kinetic data suggested that the mechanism for the char oxidation of wood pellets may be more complex than that for kenaf. In summary, these torrefied and pyrolyzed materials were found to represent potentially useful biomass fuels.
CO2 emissions are a major contributor to global warming. Biomass combustion is one approach to tackling this issue. Biomass is used with coal combustion in thermal power plants or with blast furnaces (BFs) because it is a carbon-neutral fuel; therefore, biomass provides the advantage of reduced CO2 emissions. To examine the effect of co-firing on pulverized coal injection (PCI) in BFs, two coals of different ranks were blended with the biomass in different proportions, and then their combustion behaviors were examined using a laminar flow reactor (LFR). The PCI combustion primarily functions as a source of heat and CO to supply the upper part of the BF. To create a similar PCI combustion environment, the LFR burner forms a diffusion flat flame with an oxygen concentration of 26% with a flame temperature of ~2000–2250 K at a heating rate of 105 K/s. The combustion characteristics, such as the flame structure, burning coal particle temperature, unburned carbon (UBC), and CO and CO2 emissions were measured to evaluate their effect on PCI combustion. With the increase in the biomass blending ratio, the brightness of the volatile cloud significantly increased, and the particle temperature tended to decrease. The fragmentation phenomenon, which was observed for certain coal samples, decreased with the increase in the biomass blending ratio. In particular, with an increase in the biomass blending ratio, the optimum combustion point occurred, caused by the fragmentation of coal and volatile gas combustion of biomass.