HAROON A. M. SAEED

Prof. HAROON A. M. SAEED

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
TLTengfei Li
Tengfei Li
Gaojin LyuGaojin Lyu
Gaojin Lyu
YLYu Liu
Yu Liu
RLRui Lou
Rui Lou
Lucian LuciaLucian Lucia
Lucian Lucia
HAROON A. M. SAEEDHAROON A. M. SAEED
HAROON A. M. SAEED
Deep eutectic solvents (DESs) are a potentially high-value lignin extraction methodology. DESs prepared from choline chloride (ChCl) and three hydrogen-bond donors (HBD)—lactic acid (Lac), glycerol, and urea—were evaluated for isolation of willow (Salix matsudana cv. Zhuliu) lignin. DESs types, mole ratio of ChCl to HBD, extraction temperature, and time on the fractionated DES-lignin yield demonstrated that the optimal DES-lignin yield (91.8 wt % based on the initial lignin in willow) with high purity of 94.5% can be reached at a ChCl-to-Lac molar ratio of 1:10, extraction temperature of 120 °C, and time of 12 h. Fourier transform infrared spectroscopy (FT-IR) , 13C-NMR, and 31P-NMR showed that willow lignin extracted by ChCl-Lac was mainly composed of syringyl and guaiacyl units. Serendipitously, a majority of the glucan in willow was preserved after ChCl-Lac treatment.

27 March 2024 in Carbon Energy
Verified
Journal Article
Open access
HAROON A. M. SAEEDHAROON A. M. SAEED
HAROON A. M. SAEED
WXWeilin Xu
Weilin Xu
HYHongjun Yang
Hongjun Yang
The world's population is growing, leading to an increasing demand for freshwater resources for drinking, sanitation, agriculture, and industry. Interfacial solar steam generation (ISSG) can solve many problems, such as mitigating the power crisis, minimizing water pollution, and improving the purification and desalination of seawater, rivers/lakes, and wastewater. Cellulosic materials are a viable and ecologically sound technique for capturing solar energy that is adaptable to a range of applications. This review paper aims to provide an overview of current advancements in the field of cellulose‐based materials ISSG devices, specifically focusing on their applications in water purification and desalination. This paper examines the cellulose‐based materials ISSG system and evaluates the effectiveness of various cellulosic materials, such as cellulose nanofibers derived from different sources, carbonized wood materials, and two‐dimensional (2D) and 3D cellulosic‐based materials from various sources, as well as advanced cellulosic materials, including bacterial cellulose and cellulose membranes obtained from agricultural and industrial cellulose wastes. The focus is on exploring the potential applications of these materials in ISSG devices for water desalination, purification, and treatment. The function, advantages, and disadvantages of cellulosic materials in the performance of ISSG devices were also deliberated throughout our discussion. In addition, the potential and suggested methods for enhancing the utilization of cellulose‐based materials in the field of ISSG systems for water desalination, purification, and treatment were also emphasized.

18 March 2015 in The Journal of the Textile Institute
Verified
Journal Article
Closed access
YEYassir A. Eltahir
Yassir A. Eltahir
HAROON A. M. SAEEDHAROON A. M. SAEED
HAROON A. M. SAEED
YXYumin Xia
Yumin Xia
HYHe Yong
He Yong
WYWang Yimin
Wang Yimin
Polyamide 5,6 (PA56) and polyamide 6 (PA6) fibers were spun by melt spinning process and drawn by a thermal drawing in order to improve their mechanical properties. The effects of drawing conditions on mechanical properties, moisture absorption, and dyeing behavior were investigated by means of tensile testing measurements, moisture absorption test, as well as color strength measurements. It was found that the tenacity and Young’s modulus were significantly increased, while the elongation at break decreased as the draw ratio (DR) and temperature increased due to the increase in molecular orientation along the fiber axis and the crystallinity. PA56 fibers showed a little lower mechanical properties and much higher moisture regain than PA6 fibers at different DRs. This can be attributed to the amide group content in the polymer backbone, which yields higher moisture regain in PA56 fibers than PA6 fibers. The dyeing behaviors of PA56 fiber, in terms of dyebath exhaustion, color strength, and wash fastness are similar as those of PA6. Those results indicated that PA56 is a competitive novel fiber for textile material.

27 March 2014 in Textile Research Journal
Verified
Journal Article
Closed access
YEYassir A. Eltahir
Yassir A. Eltahir
HAROON A. M. SAEEDHAROON A. M. SAEED
HAROON A. M. SAEED
CYChen Yuejun
Chen Yuejun
YXYumin Xia
Yumin Xia
WYWang Yimin
Wang Yimin
Polyamide 5,6 (PA 5,6) fibers were prepared using the melt-spinning method. The effects of draw ratio and temperature on the structure and properties of PA 5,6 fibers were investigated by means of differential scanning calorimetry (DSC), wide-angle X-ray diffraction, sonic velocity and tensile test measurements. DSC results revealed that the melting temperature showed no considerable variation, while the heat of fusion increased with increments with draw ratio and temperature. It was found that the crystallinity and crystal size of PA 5,6 fibers were directly proportional to the draw ratio and temperature and the orientation factor increases as expected upon drawing. The tenacity and Young's modulus were found to be increased, while the elongation at break decreased with the draw ratio and temperature. The improvement in mechanical properties may be attributed to the increase of orientation along the fiber axis and the crystallinity.

21 February 2014 in Journal of Polymer Engineering
Verified
Journal Article
Closed access
YEYassir A. Eltahir
Yassir A. Eltahir
HAROON A. M. SAEEDHAROON A. M. SAEED
HAROON A. M. SAEED
CYChen Yuejun
Chen Yuejun
YXYumin Xia
Yumin Xia
WYWang Yimin
Wang Yimin
The non-isothermal crystallization behavior of polyamide 5,6 (PA56) was investigated by differential scanning calorimeter (DSC), and the non-isothermal crystallization kinetics were analyzed using the modified Avrami equation, the Ozawa model, and the method combining the Avrami and Ozawa equations. It was found that the Avrami method modified by Jeziorny could only describe the primary stage of non-isothermal crystallization kinetics of PA56, the Ozawa model failed to describe the non-isothermal crystallization of PA56, while the combined approach could successfully describe the non-isothermal crystallization process much more effectively. Kinetic parameters, such as the Avrami exponent, kinetic crystallization rate constant, relative degree of crystallinity, the crystallization enthalpy, and activation energy, were also determined for PA56.

1 May 2017 in BioResources
Verified
Journal Article
Open access
PDF file
HAROON A. M. SAEEDHAROON A. M. SAEED
HAROON A. M. SAEED
YLYu Liu
Yu Liu
Lucian LuciaLucian Lucia
Lucian Lucia
HCHonglei Chen
Honglei Chen
Evaluation of Sudanese Sorghum and Bagasse as a Pulp and Paper Feedstock